An Age-Hardening Model for Al-Mg-Si Alloys Considering Needle-Shaped Precipitates
Source abstract
Abstract
Abstract In the present study, an age-hardening model for Al-Mg-Si alloys was developed considering cylindrical morphology with constant aspect ratio for precipitates. It is assumed that the precipitate distribution during underaging is controlled by simultaneous nucleation and growth, and after peak age, the process becomes coarsening controlled. The transition from the nucleation/growth regime to the coarsening regime takes place when the equilibrium fraction of the precipitating phase is reached. The microstructural model is combined with a precipitation-strengthening model to predict the evolution of yield strength of Al-Mg-Si alloys during aging. The predictions of the model on the evolution of yield strength and length, radius, and volume fraction of precipitates are presented and compared with experimental data.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. S. Esmaeili and D.J. Lloyd: Acta Mater., 2005, vol. 53, pp. 5257–71.10.1016/j.actamat.2005.08.006 ↗
2. S. Esmaeili, D.J. Lloyd, and W.J. Poole: Acta Mater., 2003, vol. 51, pp. 2243–57.10.1016/S1359-6454(03)00028-4 ↗
3. O.R. Myhr, Ø. Grong, and S.J. Andersen: Acta Mater., 2001, vol. 49, pp. 65–75.10.1016/S1359-6454(00)00301-3 ↗
4. O.R. Myhr and Ø. Grong: Acta Metall. Mater., 1991, vol. 39, pp. 2693–2702.10.1016/0956-7151(91)90085-F ↗
5. O.R. Myhr and Ø. Grong: Acta Metall. Mater., 1991, vol. 39, pp. 2703–27.10.1016/0956-7151(91)90086-G ↗
6. H.R. Schercliff and M.F. Ashby: Mater. Sci. Technol., 1991, vol. 7, pp. 85–91.10.1179/026708391790182566 ↗
7. O.R. Myhr and Ø. Grong: Acta Mater., 2000, vol. 48, pp. 1605–15.10.1016/S1359-6454(99)00435-8 ↗
8. G. Horvay and W.J. Cahn: Acta Metall., 1961, vol. 9, pp. 695–705.10.1016/0001-6160(61)90008-6 ↗
9. R. Trivedi: Acta Metall., 1970, vol. 18, pp. 287–96.10.1016/0001-6160(70)90143-4 ↗
10. P.E.J. Rivera-Diaz-del-Castillo and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 25–29.10.1179/026708301101509070 ↗
11. H.I. Aaronson, K.R. Kinsman, and K.C. Russell: Scripta Mater., 1970, vol. 4, pp. 101–06.10.1016/0036-9748(70)90172-9 ↗
12. H.R. Shercliff and M.F. Ashby: Acta Metall. Mater., 1990, vol. 38, pp. 1789–1802.10.1016/0956-7151(90)90291-N ↗
13. H.R. Shercliff and M.F. Ashby: Acta Metall. Mater., 1990, vol. 38, pp. 1803–12.10.1016/0956-7151(90)90292-O ↗
14. A. Deschamps and Y. Brechet: Acta Mater., 1998, vol. 47, no. 1, pp. 293–305.10.1016/S1359-6454(98)00296-1 ↗
15. D.H. Bratland, Ø. Grong, H.R. Shercliff, O.R. Myhr, and S.T. TjØtta: Acta Mater., 1997, vol. 45, pp. 1–22.10.1016/S1359-6454(96)00100-0 ↗
16. O.R. Myhr, Ø. Grong, H.G. Faejr, and C.D. Marioara: Acta Mater., 2004, vol. 52, pp. 4997–5008.10.1016/j.actamat.2004.07.002 ↗
17. Ø. Grong and H.R. Shercliff: Progr. Mater. Sci., 2002, vol. 47, pp. 163–282.10.1016/S0079-6425(00)00004-9 ↗
18. W.F. Miao and D.E. Laughlin: Scripta Mater., 1999, vol. 40, pp. 873–78.10.1016/S1359-6462(99)00046-9 ↗
19. J.F. Nie, B.C. Muddle, and I.J. Polmear: Mater. Sci. Forum, 1996, vol. 1257, pp. 217–22.
20. K.G. Russell and F. Ashby: Acta Mater., 1970, vol. 18, pp. 891–901.10.1016/0001-6160(70)90017-9 ↗
21. P.M. Kelly: Scripta Metall., 1972, vol. 6, pp. 647–51.10.1016/0036-9748(72)90120-2 ↗
22. M. Ferrante and R.D. Doherty: Acta Metall., 1979, vol. 27, pp. 1603–12.10.1016/0001-6160(79)90043-9 ↗
23. G. Liu, G.J. Zhang, X.D. Ding, J. Sun, and K.H. Chen: Mater. Sci. Eng. A, 2003, vol. 344, pp. 113–19.10.1016/S0921-5093(02)00398-2 ↗
24. S. Esmaeili: Ph.D. Thesis, 2002, Feb., p. 132.
25. A.J. Ardell: Metall. Trans. A, 1985, vol. 16A, pp. 2131–65.10.1007/BF02670416 ↗
26. J. Friedel: in Electron Microscopy and Strength of Crystals, G. Thomas and J. Washburn, eds., Interscience Publishers, New York, NY, 1962, p. 605.
27. L.M. Cheng, W.J. Poole, J.D. Embury, and D.J. Lloyd: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2473–82.10.1007/s11661-003-0007-2 ↗