Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium
Source abstract
Abstract
This article focuses on the effect of equal channel angular pressing (ECAP) on the fracture behavior of a commercially pure (CP) Ti. Standard mechanical tensile and fracture tests are performed at room temperature and 250 °C to determine the tensile mechanical properties and the J-∆a curves. The effect of temperature on the fracture properties, namely, the fracture toughness, the slope of the J-∆a curves, the total crack growth resistance, and the stability of the crack propagation before and after ECAP is investigated. Quantitative analysis of the fracture surfaces is performed using an automatic fracture surface analysis system. The energy required to form the fracture surface is estimated. The yield stress and the ultimate tensile stress are significantly increased by ECAP. However, similar to the case of other strengthening procedures, the fracture toughness decreases after ECAP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, and Y.T. Zhu: J. Met., 2006, vol. 4, pp. 33–39.
2. F. Wetscher, A. Vorhauer, R. Stock, and R. Pippan: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 809–16.10.1016/j.msea.2004.01.096 ↗
3. T. Hebesberger, H.P. Stuwe, A. Vorhauer, F. Wetscher, and R. Pippan: Acta Mater., 2005, vol. 53, pp. 393–402.10.1016/j.actamat.2004.09.043 ↗
4. A. Vorhauer, S. Kleber, and R. Pippan: Mater. Sci. Eng. A., 2005, vols. 410–411, pp. 281–84.10.1016/j.msea.2005.08.119 ↗
5. R.Z. Valiev, A.V. Sergueeva, and A.K. Mukherjee: Scripta Mater., 2003, vol. 49, pp. 669–74.10.1016/S1359-6462(03)00395-6 ↗
6. K.S. Kumar, H. Van Swygenhoven, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5743–74.10.1016/j.actamat.2003.08.032 ↗
7. E. Ma: J. Met., 2006, vol. 58, pp. 49–58.
8. Y.H. Zhao, X.Z. Liao, S. Cheng, E. Ma, and Y.T. Zhu: Adv. Mater., 2006, vol. 18, pp. 2280–84.10.1002/adma.200600310 ↗
9. Y.M. Wang and E. Ma: Mater. Sci. Eng. A, 2004, vols. 375–377, pp. 46–52.10.1016/j.msea.2003.10.214 ↗
10. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
11. R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci., 2006, vol. 51, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
12. A.P. Zhilyaev and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893–979.10.1016/j.pmatsci.2008.03.002 ↗
13. M. Faleschini, H. Kreuzer, D. Kiener, and R. Pippan: J. Nucl. Mater., 2007, vols. 367–370, pp. 800–05.10.1016/j.jnucmat.2007.03.079 ↗
14. A. Hohenwarter and R. Pippan: Proceedings of the Hael Mughrabi Honorary Symposium at 2008 TMS Annual Meeting, Warrendale, PA, 2008, pp. 183–88.
15. G. Purcek, O. Saray, I. Karaman, and T. Kucukomeroglu: Mater. Sci. Eng. A, 2008, vol. 490, pp. 403–10.10.1016/j.msea.2008.01.080 ↗
16. V.V. Stolyarov, R.Z. Valiev, and Y.T. Zhu: Appl. Phys. Lett., 2006, vol. 88, p. 041905.10.1063/1.2167800 ↗
17. V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C. Lowe, and R.Z. Valiev: Mater. Sci. Eng. A, 2003, vol. 343, pp. 43–50.10.1016/S0921-5093(02)00366-0 ↗
18. “ASTM E1820-01, Standard Test Method for Measurement of Fracture Toughness,” Annual Book of Standards, ASTM, Philadelphia, PA, 2001.
19. J. Stampfl and O. Kolednik: Int. J. Fracture, 2000, vol. 101, pp. 321–45.10.1023/A:1007500325074 ↗
20. S. Scherer and O. Kolednik: Microscopy and Analysis, 2001, vol. 70, p. 15.
21. A. Tatschl and O. Kolednik: Mater. Sci. Eng. A, 2003, vol. 339, pp. 265–80.10.1016/S0921-5093(02)00111-9 ↗
22. I. Sabirov and O. Kolednik: Scripta Mater., 2005, vol. 53, pp. 1373–78.10.1016/j.scriptamat.2005.08.027 ↗
23. O. Kolednik: Adv. Eng. Mater., 2006, vol. 8, pp. 1079–83.10.1002/adem.200600150 ↗
24. I. Sabirov, D. Duschlbauer, H.E. Pettermann, and O. Kolednik: Mater. Sci. Eng. A, 2005, vol. 393, pp. 275–85.10.1016/j.msea.2004.10.013 ↗
25. I. Sabirov, O. Kolednik, R.Z. Valiev, and R. Pippan: Acta Mater., 2005, vol. 53, pp. 4919–30.10.1016/j.actamat.2005.07.010 ↗
26. H.P. Stuwe: Eng. Fract. Mech., 1980, vol. 13, p. 231.10.1016/0013-7944(80)90056-9 ↗
27. D.F. Thomason: Ductile Fracture of Materials, Pergamon Press, Oxford, United Kingdom, 1990.
28. Y.G. Ko, D.H. Shin, K.T. Park, and C.S. Lee: Scripta Mater., 2006, vol. 54, pp. 1785–89.10.1016/j.scriptamat.2006.01.034 ↗
29. F. Dalla Torre, H. Van Swygenhoven, and M. Victoria: Acta Mater., 2002, vol. 50, pp. 3957–70.10.1016/S1359-6454(02)00198-2 ↗
30. H. Van Swygenhoven: Science, 2004, vol. 304, pp. 273–76.10.1126/science.1095071 ↗
31. S. Nemat Nasser, W.G. Guo, and J.Y. Cheng: Acta Mater., 1999, vol. 47, pp. 3705–20.10.1016/S1359-6454(99)00203-7 ↗