journal article·2003-11

The effects of cold working on sensitization and intergranular corrosion behavior of AISI 304 stainless steel

Raghuvir Singh, I. Chattoraj, A. Kumar, B. Ravikumar, P. K. Dey

Publisher page

Abstract

The effects of prior cold rolling of up to an 80 pct reduction in thickness on the sensitization-desensitization behavior of Type AISI 304 stainless steel and its susceptibility to intergranular corrosion have been studied by electrochemical potentiokinetic reactivation (EPR) and Strauss-test methods. The results indicate that the prior deformation accelerated the sensitization as compared to the undeformed stainless steel. The deformed Type 304 stainless steel experienced desensitization at higher temperatures and times, and it was found to be enhanced by increased cold deformation. This could be attributed to the increased long-range chromium diffusion, possibly brought on by increasing pipe diffusion and vacancies. The role of the deformation-induced martensite (DIM) and texture, introduced by uniaxial cold rolling, on the sensitization-desensitization kinetics has also been discussed. This study could not reveal any systematic relationship between texture and the degree of sensitization (DOS) obtained. The effect of DIM on DOS seems to be pronounced at 500 °C when the steel retained significant amounts of DIM; however, the retained DIM is insignificant at higher sensitization times and temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. V. Cihal: Intergranular Corrosion of Steels and Alloys, Material Science Monograph No. 18, Elsevier Science Publishing Company, New York, NY, 1984, pp. 146–49.
2. E.C. Bain, R.H. Aborn, and J.J.B. Rutherford: Trans. Am. Soc. Steel Treating, 1993, vol. 21, pp. 481–509.
3. C.S. Tedmon, Jr. D.A. Vermilyea, and D.E. Broecker: Corrosion, 1971, vol. 27, pp. 104–06.10.5006/0010-9312-27.3.104 ↗
4. C.L. Briant and A.M. Ritter: Metall. Trans. A, 1980, vol. 11A, pp. 2009–17.10.1007/BF02655120 ↗
5. N. Parvathavarthini, R.K. Dayal, and J.B. Gnanamoorthy: J. Nucl. Mater., 1994, vol. 208, pp. 251–58.10.1016/0022-3115(94)90334-4 ↗
6. A.H. Advani, L.E. Murr, D.G. Atteridge, and R. Chelakara: Metall. Trans. A, 1991, vol. 22A, pp. 2917–34.10.1007/BF02650252 ↗
7. E. Almanza and L.E. Murr: J. Mater. Sci., 2000, vol. 35, pp. 3181–88.10.1023/A:1004886213848 ↗
8. E.A. Trillo, R. Beltran, J.G. Maldonado, R.J. Romero, L.E. Murr, W.W. Fisher and A.H. Advani: Mater. Characterization, 1995, vol. 35, pp. 99–112.10.1016/1044-5803(95)00072-0 ↗
9. R. Beltran, J.G. Maldonado, L.E. Murr, and W.W. Fisher: Acta Metall., 1997, vol. 45, pp. 4351–60.
10. S. Pednekar and S. Smialowska: Corrosion, 1980, vol. 36, pp. 565–77.10.5006/0010-9312-36.10.565 ↗
11. A.P. Majidi and M.A. Streicher: Corrosion, 1984, vol. 40, pp. 445–58.10.5006/1.3577915 ↗
12. C. Garcia, F. Martin, P. De Tiedra, J.A. Heredero, and M.L. Aparicio: Corrosion, 2000, vol. 56, pp. 243–55.10.5006/1.3287650 ↗
13. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
14. E.A. Trillo and L.E. Murr: J. Mater. Sci., 1998, vol. 33, pp. 1263–71.10.1023/A:1004390029071 ↗
15. E.A. Trillo and L.E. Murr: Acta Mater., 1999, vol. 47, pp. 235–45.10.1016/S1359-6454(98)00322-X ↗
16. R.K. Dayal, N. Parvathavarthini, J.B. Gnanamoorthy, and P. Rodriguez: Met. Mater. Processing, 1989, vol. 1, pp. 123–34.
17. C.S. Barret and T.B. Massalski: Structure of Metals, Eurasia Publishing House, New Delhi, 1968
18. ASTM Standard Designation A262-Practice A-F, 1994, ASTM, Philadelphia, PA, 1993, vol. 03.02, pp. 1–16.
19. R. Bendure, L. Hkenberry, and J. Waxweiler: Trans. TMS-AIME, 1961, vol. 221, pp. 1032–36.
20. A. Baumel, H.E. Buhler, H.J. Schuller, P. Schwaab, W. Schwenk, H. Ternes and H. Zitter: Corr. Sci., 1964, vol. 4, pp. 89–103.10.1016/0010-938X(64)90010-1 ↗
21. C. Stawstrom and M. Hillert: J. Iron Steel, 1969, vol. 207, pp. 77–85.
22. LFM Martins, R.L. Plaut, and A.F. Padilha: Iron Steel Inst. Jpn., 1998, vol. 38, pp. 572–79.10.2355/isijinternational.38.572 ↗
23. R.P. Reed: Acta Metall., 1962, vol. 10, pp. 865–77.10.1016/0001-6160(62)90101-3 ↗
24. E.W. Hart: Acta Metall., 1957, vol. 5, pp. 597–601.10.1016/0001-6160(57)90127-X ↗
25. A.J. Kumnick and H.H. Johnson: Acta Metall., 1980, vol. 28, pp. 33–39.10.1016/0001-6160(80)90038-3 ↗
26. H. Mecking and Y. Estrin: Scripta Metall., 1980, vol. 14, pp. 815–19.10.1016/0036-9748(80)90295-1 ↗