journal article·2007-04

Thermal Analysis of the Bridgman and Liquid-Metal-Cooled Directional Solidification Investment Casting Processes

A.J. Elliott, T.M. Pollock

Publisher page

Abstract

Thermal profiles obtained during directional solidification of Ni-base superalloy castings by the Bridgman and liquid-metal-cooled (LMC) techniques have been used to develop and validate the finite-element models of these processes. Models of the directional solidification processes for the columnar-grain alloy GTD-444 are used to evaluate the various heat-transfer steps and heat extraction modes within each process. This analysis highlights the similarities and the fundamental differences in heat-transfer modes between the two solidification approaches. Ultimately, the unique limiting heat-transfer step of each process is identified. For the stepped plate configuration investigated, heat extraction is limited by radiation from the exterior mold surface in the Bridgman process. Heat transfer between the casting and the interior mold surface is the primary resistance in the LMC process, and heat extraction is enhanced by the lowering coolant temperatures in this process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. P.W. Bridgman: U.S. Patent No. 1,793,672, 193110.1136/bmj.1.3667.672 ↗
2. M. Gell, C.P. Sullivan, F.L. VerSnyder: in Solidification Technology, J.J. Burke, M.C. Flemings, A.E. Gorum, eds., Brook Hill, Chestnut Hill, MA, 1974, pp. 141-64
3. R.W. Smashey: U.S. Patent No. 3,897,815, 1975
4. T.M. Pollock, W.H. Murphy: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1081–9410.1007/BF02649777 ↗
5. F. Hugo, U. Betz, J. Ren, S.-C. Huang, J.A. Bondarenko, and V. Gerasimov: Int. Symp. on Liquid Metal Processing and Casting, A. Mitchell, L. Ridgway, and M. Baldwin, eds., AVS, New York, NY, 1999, pp. 16–30
6. N. D’Souza, M.G. Ardakani, M. McLean, B.A. Shollock: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2877–8610.1007/BF02830351 ↗
7. M. Konter, E. Kats, N. Hofmann: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S.L. Olson, J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 189–200
8. G.K. Bouse, J.R. Mihalisin: in Superalloys, Supercomposites and Superceramics, J.K. Tien, T. Claufield, eds., Academic Press, San Diego, CA, 1989, pp. 99–14810.1016/B978-0-12-690845-9.50010-5 ↗
9. L.G. Fritzemeier: in Superalloys 1988, D.N. Duhl, G.E. Mauer, S.D. Antolovich, C.H. Lund, S. Reichman, eds., TMS, Warrendale, PA, 1988, pp. 265–74
10. A.J. Elliott, G. Feng, S. Balsone, J.C. Schaeffer, T.M. Pollock, M.F.X. Gigliotti: in Processing and Fabrication of Advance Materials XIV, T.S. Srivatsan, R.A. Varin, R. Abbaschian, S. Viswanathan, eds., TMS, Warrendale, PA, 2005, pp. 267–82
11. T.J. Fitzgerald, R.F. Singer: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1377–8310.1007/s11661-997-0274-4 ↗
12. J. Grossman, J. Preuhs, W. Esser, and R.F. Singer: Int. Symp. on Liquid Metal Processing and Casting, A. Mitchell, L. Ridgway, and M. Baldwin, eds., AVS, New York, NY, 1999, pp. 31–40
13. A. Lohmüller, W. Esser, J. Gossmann, M. Hördler, J. Preuhs, R.F. Singer: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S.L. Olson, J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 181–88
14. A. Kermanpur, M. Rappaz, N. Varahram, P. Davami: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 1293–130410.1007/s11663-000-0017-z ↗
15. A.J. Elliott, S. Tin, W.T. King, S.-C. Huang, M.F.X. Gigliotti, T.M. Pollock: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3221–3110.1007/s11661-004-0066-z ↗
16. A.J. Elliott, G.B. Karney, M.F.X. Gigliotti, T.M. Pollock: in Superalloys 2000, K.A. Green, H. Harada, T.E. Howson, T.M. Pollock, R.C. Reed, J.J. Schirra, S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 421–30
17. A.J. Elliott: Ph.D. Thesis, The University of Michigan, Ann Arbor, MI, 2005
18. J.D. Hunt: in Solidification and Casting of Metals, J.D. Hunt, ed., The Metals Society, London, 1979, pp. 3–9
19. R.E. Shalin, V.A. Pankratov: Metall. Sci. Technol., 1992, vol. 10, pp. 3–9
20. L. Li, R.A. Overfelt: J. Mater. Sci., 2002, vol. 37, pp. 3521–3210.1023/A:1016527509815 ↗
21. P.N. Quested, M. McLean: Solidification Technology in the Foundry and Cast House, The Metals Society, London, 1983, pp. 586–91
22. W. Kurz, D.J. Fisher: Acta Metall., 1981, vol. 29, pp. 11–2010.1016/0001-6160(81)90082-1 ↗
23. S.-C. Huang, M.E. Glicksman: Acta Metall., 1981, vol. 29, pp. 701–1510.1016/0001-6160(81)90115-2 ↗
24. R. Trivedi, K. Somboonsuk: Mater. Sci. Eng., 1984, vol. 65, pp. 65–7410.1016/0025-5416(84)90200-3 ↗
25. K. Somboonsuk, J.T. Mason, R. Trivedi: Metall. Trans. A, 1984, vol. 15A, pp. 967–7510.1007/BF02644688 ↗
26. D. Ma, P.R. Sahm: Metall. Trans. A, 1998, vol. 29A, pp. 1113–1910.1007/s11661-998-0303-y ↗
27. M. McLean: Directionally Solidified Materials for High Temperature Service, The Metals Society, London, 1983
28. W. Kurz, D.J. Fisher: Fundamentals of Solidification, 4th rev. ed., Trans Tech Publications, Enfield, NH, 1998
29. S.M. Copley, A.F. Giamei, S.M. Johnson, M.F. Hornbecker: Metall. Trans., 1970, vol. 1, pp. 2193–220410.1007/BF02643435 ↗
30. T.M. Pollock, W.H. Murphy, E.H. Goldman, D.L. Uram, J.S. Tu: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, pp. 125–34
31. A.F. Giamei, B.H. Kearn: Metall. Trans., 1970, vol. 1, pp. 2185–9210.1007/BF02643434 ↗
32. P. Auburtin, S.L. Cockcroft, A. Mitchell: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 443–50
33. T. Overfelt: JOM, 1992, vol. 44, pp. 17–2010.1007/BF03222248 ↗
34. J.G. Tschinkel, A.F. Giamei, and B.H. Kearn: U.S. Patent No. 3,763,926, 1973
35. A.F. Giamei, J.G. Tschinkel: Metall. Trans. A, 1976, vol. 7A, pp. 1427–3410.1007/BF02658829 ↗
36. R.J. Naumann: J. Cryst. Growth, 1982, vol. 58, pp. 554–6810.1016/0022-0248(82)90143-9 ↗
37. T. Jasinski, W.M. Rohsenow, A.F. Witt: J. Cryst. Growth, 1983, vol. 61, pp. 339–5410.1016/0022-0248(83)90371-8 ↗
38. T. Jasinski, R.J. Naumann: J. Cryst. Growth, 1984, vol. 66, pp. 469–7110.1016/0022-0248(84)90232-X ↗
39. M. Saitou, A. Hirata: J. Cryst. Growth, 1991, vol. 113, pp. 147–5610.1016/0022-0248(91)90020-6 ↗
40. K.O. Yu, J.J. Nichols, M. Robinson: JOM, 1992, vol. 44, pp. 21–2510.1007/BF03222249 ↗
41. J.S. Tu, F.R. K: JOM, 1992, vol. 44, pp. 26–28
42. D. Waite and M. Samonds: 39th Annual Technical Meeting, Investment Casting Institute, Dallas, TX, 1991, pp. 17.1–17.26
43. J.-C. Liu, T.-S. Lee, W.-S. Hwang: Mater. Sci. Technol., 1991, vol. 7, pp. 954–6410.1179/mst.1991.7.10.954 ↗
44. R.J. Mador, M.O. Duffy, A.F. Giamei, F. Landis: Modeling and Control of Casting and Welding Processes, TMS, Warrendale, PA, 1986, pp. 433–48
45. N. El-Mahallawy: Giessereiforschung, 1981, vol. 33, pp. 139–45
46. L. Vermot des Roches, J.C. Chevrier: Eur. J. Mech. Environ. Eng., 1989, vol. 34, pp. 27–35
47. R. Tintillier, F. Robert, F. Toulet: Materials for Advanced Power Engineering, Kluwer Academic Publishers Group, Dordrecht, The Netherlands, 1994, pp. 1041–52
48. A.F. Giamei, R.J. Mador: Intelligent Processing of Materials and Advanced Sensors, TMS, Warrendale, PA, 1986, pp. 127–39
49. R.A. Overfelt, C.A. Matlock, R.C. Wilcox: J. Cryst. Growth, 1995, vol. 147, pp. 403–0710.1016/0022-0248(94)00830-2 ↗
50. R.N. Grugel, Y. Zhou: Metall. Trans. A, 1989, vol. 20A, pp. 969–7310.1007/BF02651662 ↗
51. C.-A. Gandin, M. Eshelman, R. Trivedi: Metall. Trans. A, 1996, vol. 27A, pp. 2727–3710.1007/BF02652367 ↗
52. ProCAST User Manual Version 2004.1, ESI Group, Paris, 2004
53. E.W. Ross, C.S. Wukusick, and W.T. King: U.S. Patent No. 5,399,313, 1995
54. E.W. Ross K.S. O’Hara: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 19–25
55. G.K. Bouse, M.F. Henry, and J.C. Schaeffer: U.S. Patent No. 6,908,518, 2005
56. K. Harris and G.L. Erickson: U.S. Patent No. 4,643,782, 198710.1177/0038038587021004018 ↗
57. K. Harris, G.L. Erickson, S.L. Sikkenga, W.D. Brentnall, J.M. Aurrecoechea, K.G. Kubarych: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, pp. 297–306
58. S.S. Kutateladze, V.M. Borishanksii, I.I. Novikov, O.S. Fedynskii: Liquid-Metal Heat Transfer Media, Consultants Bureau, Inc., New York, NY, 195910.1007/978-1-4899-4902-8 ↗
59. B.T.K. Barry, C.J. Thwaites: Tin and Its Alloys and Compounds, John Wiley & Sons, New York, NY, 1983
60. T. Iida, R.I.L. Guthrie: The Physical Properties of Liquid Metals, Oxford University Press, New York, NY, 1988
61. E. Horler, C. Bailey, M. Cross: Contact Mechanics II: Computational Techniques, Computational Mechanics Publications, Billerica, MA, 1995, pp. 345–52
62. P. Chow, C. Bailey, M. Cross, K. Pericleous: in Modelling of Casting, Welding and Advanced Solidification Processes VII, M. Cross, J. Campbell, eds., TMS, Warrendale, PA, 1995, pp. 213–21
63. J.M. Drezet, M. Rappaz, G.-U. Grün, M. Gremaud: Metall. Trans. A, 2000, vol. 31A, pp. 1627–3410.1007/s11661-000-0172-5 ↗
64. A.J. Williams, T.N. Croft, M. Cross: Metall. Trans. B, 2003, vol. 34B, pp. 727–3410.1007/s11663-003-0042-9 ↗
65. D.R. Poirier, E.J. Poirier: Heat Transfer Fundamentals for Metal Casting, 2nd ed., TMS, Warrendale, PA, 1994
66. C.H. Lund, J. Hockin: in The Superalloys, C.T. Sims, W.C. Hagel, eds., John Wiley & Sons, New York, NY, 1972, pp. 403–25
67. R.F. Singer: in Materials for Advanced Power Engineering, D. Coutsouradis, J.H. Davidson, J. Ewald, P. Greenfield, T. Khan, M. Malik, D.B. Meadowcroft, V. Regis, R.B. Scarlin, F. Schubert, D.V. Thornton, eds., Kluwer Academic Publishers Group, Dordrecht, The Netherlands, 1994, pp. 1707–29
68. B.B. Seth: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S.L. Olson, J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 3–16
69. S. Jones, C. Yuan, and M.R. Jolly: in 51st Annual Technical Conference on Investment Casting, Investment Casting Institute, Dallas, TX, 2003, pp. 14:1–14:29
70. S. Jones: Foundry Trade J., 2003, vol. 177, pp. 6–7