Carbon Diffusion Measurement in Austenite in the Temperature Range 500 °C to 900 °C
Source abstract
Abstract
Carbon diffusion in austenite plays a critical role in phase transformation in steel. However, it can only be estimated in the fully austenitic range and has then to be extrapolated to the temperature range of the phase transformation. Therefore, published data are limited to temperatures above 750 °C. In this study, new experiments are carried out to determine the carbon diffusion coefficient in austenite at temperatures as low as 500 °C. Carburization experiments are performed in the austenitic range for a Fe-1.5 pct Mn 0.13 pct C and a Fe-31 pct Ni alloy (wt pct). Composition profile measurements, which are done using glow discharge optical emission spectrometry (GDOES), show that the surface composition is not constant with time. A methodology has been developed to assess the diffusion coefficient of carbon in austenite combining the measured carbon profiles and a numerical method to compute the diffusion profile taking into account the time evolution of the boundary condition. This method is first validated on the Fe-C-Mn steel. Carburization experiments are carried out on a Fe-31 pct Ni alloy at 900 °C, 800 °C, 700 °C, 600 °C, and 500 °C. The carbon diffusion coefficient is assessed using the method described above and fitted with the following expression (T in Kelvin): $$ D = 1.23\cdot10^{{ - 6}} \cdot e^{{ - \frac{{15,050}} {{T{\left( {\text{K}} \right)}}}}} ({\text{m}}^{{\text{2}}} {\text{/s}}) $$ . The new expression is compared with previous experimental results measured for comparable nickel content at higher temperatures, and it shows a reasonable agreement. The model proposed by Agren for carbon diffusion has been modified to take into account the thermodynamic contribution of nickel. This model also shows good agreement with the present experimental results, even if it was fitted to experiments performed at higher temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. A. Van der Ven, L. Delaey: Progr. Mater. Sci., 1996, vol 40, pp. 181–26410.1016/0079-6425(96)00002-3 ↗
2. D. Quidort, Y.J.M. Brechet: Acta Mater., 2001, vol 49 (20), pp. 4161–70.10.1016/S1359-6454(01)00316-0 ↗
3. M. Hillert: Scripta Mater., 2002, vol 47 (3), pp. 137–38.10.1016/S1359-6462(02)00118-5 ↗
4. H.K.D.H. Bhadeshia, D.V. Edmond: Acta Metall, 1980, vol 28, pp. 1265–7310.1016/0001-6160(80)90082-6 ↗
5. O. Bouaziz, D. Quidort, P. Maugis: Rev. Metal.-Cahiers D’Inform. Techn., 2003, vol. 100 (1), pp. 103–08
6. D. VanDooren, P. Thibaux, and B. De Cooman: in Modeling Control and Optimization in Ferrous and Nonferrous Industry, F. Kongoli, B.G. Thomas, and K. Sawamiphakdi, eds., TMS, Warrendale, PA, 2003, pp. 481–93
7. J. Ågren: Sripta Metall., 1986, vol. 20, pp. 1507–10.10.1016/0036-9748(86)90384-4 ↗
8. H.K.D.H. Bhadeshia: Met. Sci., 1981, vol. 15, pp. 477–7910.1016/0036-9748(81)90287-8 ↗
9. C. Wells, W. Batz, R.F. Mehl: Trans. AIME J. Met., 1950, vol. 188, pp. 553–60
10. S.S. Babu, H.K.D.H. Bhadeshia: J. Mater. Sci. Lett., 1995, vol. 14, pp. 314–1610.1007/BF00592135 ↗
11. S. Crusius, G. Inden, U. Knoop, L. Höglund, J. Agren: Z. Metalloved., 1992, vol. 83, pp. 673–78
12. A. Dinsdale: Calphad, 1991, vol. 15, pp. 317–42510.1016/0364-5916(91)90030-N ↗
13. J. Agren: J. Phys. Chem. Solids, 1982, vol. 43, pp. 385–9110.1016/0022-3697(82)90209-8 ↗
14. Aliaga, Ph.D. Thesis, Ecole des Mines de Paris, Paris, 2000.
15. J. Crank: Mathematics of Diffusion, Oxford Science Publications, Oxford, United Kingdom, 1975
16. S.K. Bose, H.J. Grabke: Z. Metallkd., 1978, vol. 69, pp. 8–15
17. M. Hillert, L.-I. Staffansson: Acta Chem. Scand., 1970, vol. 24, pp. 3618–2610.3891/acta.chem.scand.24-3618 ↗
18. M. Hillert, C. Qiu: Metall. Trans. A., 1991, vol. 22A, pp. 2187–9810.1007/BF02664985 ↗