journal article·2005-11

Deformation textures of AA8011 aluminum alloy sheets severely deformed by accumulative roll bonding

Hyoung Wook Kim, Suk Bong Kang, Nobuhiro Tsuji, Yoritoshi Min Amino

Publisher page

Abstract

A fully annealed AA8011 aluminum alloy sheet containing a number of large particles (∼5 µm) was severely deformed up to an equivalent strain of 12 by an accumulative roll-bonding (ARB) process. The texture evolution during the ARB process was clarified, along with the microstructure. The ARB-processed aluminum alloy sheets had a different texture distribution through the sheet thickness, due to the high friction between the roll and the material during the ARB process. The shear textures composed of {001} 〈110〉 and {111} 〈110〉 orientations developed at the sheet surface, while the rolling textures, including Cu {112} 〈111〉 and Dillamore {4,4,11} 〈11,11,8〉 orientations, developed at the sheet center. The textural change from a shear texture to a rolling texture at the sheet center during the ARB process contributed to an increase in the fraction of high-angle boundaries. Also, a large number of second-phase particles in the AA8011 alloy sheets weakened the texture. Up to the medium strain range (below ɛ=6.4), relatively weak textures developed, due to the inhomogeneous deformation around the second-phase particles; after the strain of 6.4, strong rolling-texture components, such as the Dillamore and Cu orientations, developed. This remarkable textural change can be explained by the reprecipitation of fine particles in grain interiors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. N. Tsuji, Y. Saito, S.H. Lee, and Y. Minamino: Adv. Eng. Mater., 2003, vol. 5, pp. 338–44.10.1002/adem.200310077 ↗
2. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
3. Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, and R.G. Hong: Scripta Mater., 1998, vol. 39, pp. 1221–27.10.1016/S1359-6462(98)00302-9 ↗
4. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: J. Jpn. Inst. Met., 1999, vol. 63, pp. 790–95.10.2320/jinstmet1952.63.6_790 ↗
5. N. Tsuji, R. Ueji, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 69–76.10.1016/S1359-6462(02)00088-X ↗
6. N. Tsuji, Y. Saito, H. Utsunomiya, and S. Tanigawa: Scripta Mater., 1999, vol. 40, pp. 795–800.10.1016/S1359-6462(99)00015-9 ↗
7. N. Tsuji, T. Iwata, M. Sato, S. Fujimoto, and Y. Minamino: Sci. Technol. Adv. Mater., 2004, vol. 5, pp. 173–80.10.1016/j.stam.2003.10.019 ↗
8. N. Tsuji, M. Shiotsuki, and Y. Saito: Mater. Trans. JIM, 1999, vol. 40, pp. 765–71.10.2320/matertrans1989.40.765 ↗
9. N. Tsuji, K. Shiotsuki, H. Utsunomiya, and Y. Saito: Mater. Sci. Forum, 1999, vols. 304–306, pp. 73–78.10.4028/www.scientific.net/MSF.304-306.73 ↗
10. S.H. Lee, Y. Saito, T. Sakai, H. Utsunomiya, and N. Tsuji: Proc. 2nd Int. Conf. on Light Materials for Transportation Systems (LiMAT 2001), Pohang University of Science and Technology, Busan, Korea, 2001, pp. 635–40.
11. Z.P. Xing, S.B. Kang, and H.W. Kim: Scripta Mater., 2001, vol. 45, pp. 597–604.10.1016/S1359-6462(01)01069-7 ↗
12. Z.P. Xing, S.B. Kang, and H.W. Kim: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1521–30.10.1007/s11661-002-0074-9 ↗
13. S.H. Lee, Y. Saito, T. Sakai, H. Utsunomiya, and N. Tsuji: Mater. Trans. JIM, 1999, vol. 40, pp. 1422–28.10.2320/matertrans1989.40.1422 ↗
14. S.H. Lee, Y. Saito, T. Sakai, H. Utsunomiya, and N. Tsuji: Mater. Sci. Forum, 2000, vols. 331–333, pp. 1169–74.10.4028/www.scientific.net/MSF.331-337.1169 ↗
15. T. Sakai, Y. Saito, T. Kanzki, N. Tamaki, and N. Tsuji: J. JCBRA, 2001, vol. 40, pp. 213–17.
16. K. Inoue, N. Tsuji, and Y. Saito: Proc. Int. Symp. on Ultrafine Grained Steels (ISUGS-2001), ISIJ, Fukuoka, Japan, 2001, pp. 126–29.
17. N. Tsuji, R. Ueji, Y. Ito, and Y. Saito: Proc. 21st Risø Int. Symp. on Materials Science, Risø National Laboratory, Roskilde, Denmark, 2000, pp. 607–16.
18. X. Huang, N. Tsuji, N. Hansen, and Y. Minamino: Mater. Sci. Eng. A, 2003, vol. A340, pp. 265–71.10.1016/S0921-5093(02)00182-X ↗
19. N. Tsuji, T. Toyoda, Y. Minamino, Y. Koizumi, M. Komatsu, and T. Yamane: Mater. Sci. Eng. A, 2003, vol. A350, pp. 108–16.10.1016/S0921-5093(02)00709-8 ↗
20. X. Huang, N. Tsuji, N. Hansen, and Y. Minamino: Mater. Sci. Forum, 2002, vols. 408–412, pp. 715–20.10.4028/www.scientific.net/MSF.408-412.715 ↗
21. N. Tsuji, T. Murakami, and Y. Saito: J. Jpn. Inst. Met., 1999, vol. 63, pp. 243–51.10.2320/jinstmet1952.63.2_243 ↗
22. Y. Ito, N. Tsuji, Y. Saito, H. Utsunomiya, and T. Sakai: J. Jpn. Inst. Met., 2000, vol. 64, pp. 429–37.10.2320/jinstmet1952.64.6_429 ↗
23. N. Tsuji, Y. Ito, Nakashima, F. Yoshida, and Y. Minamino: Mater. Sci. Forum, 2002, vols. 396–402, pp. 423–28.10.4028/www.scientific.net/MSF.396-402.423 ↗
24. N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893–99.10.1016/S1359-6462(02)00282-8 ↗
25. H.W. Kim, S.B. Kang, N. Tsuji, and Y. Minamino: Acta Mater., 2005, vol. 53, pp. 1737–49.10.1016/j.actamat.2004.12.022 ↗
26. O. Engler: Mater. Sci. Forum, 1998, vols. 273–275, pp. 483–88.10.4028/www.scientific.net/MSF.273-275.483 ↗
27. R.K. Davis, V. Randle, and G.T. Marshall: Acta Mater., 1998, vol. 46, pp. 6021–32.10.1016/S1359-6454(98)00286-9 ↗
28. H.W. Kim, S.B. Kang, Z.P. Xing, N. Tsuji, and Y. Minamino: Mater. Sci. Forum, 2002, vols. 408–412, pp. 727–32.10.4028/www.scientific.net/MSF.408-412.727 ↗
29. P. Liu, T. Thorvaldsson, and G.L. Dunlop: Mater. Sci. Technol., 1986, vol. 2, pp. 1009–18.10.1179/mst.1986.2.10.1009 ↗
30. R.M.K. Young and T.W. Clyne: Scripta Mater, 1981, vol. 15, pp. 1211–16.10.1016/0036-9748(81)90301-X ↗
31. L.F. Mondolf: Aluminum Alloys, Structure and Properties, Butterworth and Co., London, 1976, pp. 534–36.10.1016/B978-0-408-70932-3.50235-7 ↗
32. Z.K. Liu and Y.A. Chang: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1081–95.10.1007/s11661-999-0160-3 ↗
33. K. Lucke and O. Engler: Mater. Sci. Technol., 1990, vol. 6, pp. 1113–30.10.1179/mst.1990.6.11.1113 ↗
34. C.H. Choi, J.W. Kwon, K.H. Oh, and D.N. Lee: Acta Mater., 1997, vol. 45, pp. 5119–28.10.1016/S1359-6454(97)00169-9 ↗
35. Q. Liu, J. Wert, and N. Hansen: Acta Mater., 2000, vol. 48, pp. 4267–79.10.1016/S1359-6454(00)00213-5 ↗
36. I.L. Dillamore and W.T. Robers: Met. Rev., 1965, vol. 10, pp. 271–380.10.1179/095066065790138348 ↗
37. H.O. Asbeck and H. Mecking: Mater. Sci. Eng. A, 1978, vol. A34, pp. 111–19.10.1016/0025-5416(78)90041-1 ↗
38. W. Truszkowski, J. Krol, and B. Major: Metall. Trans. A, 1982, vol. 13A, pp. 665–69.10.1007/BF02644432 ↗
39. B. Major: Mater. Sci. Technol., 1992, vol. 8, pp. 510–15.10.1179/mst.1992.8.6.510 ↗
40. A. Duckham, R.D. Knutsen, and O. Engler: Acta Mater., 2001, vol. 49, pp. 2739–49.10.1016/S1359-6454(01)00166-5 ↗
41. D.J. Lloyd and D. Kenny: Acta Metall. 1980, vol. 28, pp. 639–49.10.1016/0001-6160(80)90130-3 ↗
42. F.J. Humphreys: Acta Metall., 1977, vol. 25, pp. 1323–44.10.1016/0001-6160(77)90109-2 ↗
43. J. Hirsch and K. Lucke: Acta Metall., 1988, vol. 36, pp. 2863–82.10.1016/0001-6160(88)90172-1 ↗
44. W. Mao: Mater. Sci. Eng. A, 1998, vol. A257, pp. 171–77.10.1016/S0921-5093(98)00836-3 ↗