journal article·2011-10Open access

Gradient Nanomechanics: Applications to Deformation, Fracture, and Diffusion in Nanopolycrystals

E. C. Aifantis

Abstract

The term “gradient nanomechanics” is used here to designate a generalized continuum mechanics framework accounting for “bulk-surface” interactions in the form of extra gradient terms that enter in the balance laws or the evolution equations of the relevant constitutive variables that govern behavior at the nanoscale. In the case of nanopolycrystals, the grain boundaries may be viewed either as sources/sinks of “effective” mass and internal force or as a separate phase, interacting with the bulk phase that it surrounds, and supporting its own fields, balance laws, and constitutive equations reflecting this interaction. In either view, a further common assumption introduced is that the constitutive interaction between bulk and “interface” phases enters in the form of higher order gradient terms, independently of the details of the underlying physical mechanisms that bring these terms about. The effectiveness of the approach is shown by considering certain benchmark problems for nanoelasticity, nanoplasticity, and nanodiffusion for which standard continuum mechanics theory fails to model the observed behavior. Its implications to interpreting size-dependent stress-strain curves for nanopolycrystals with varying grain size are also discussed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Nonlocal and gradient elasticity in micro/nano structures · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. E.C. Aifantis: Mech. Res. Comm., 1978, vol. 5, pp. 139–45.10.1016/0093-6413(78)90047-2 ↗
2. E.C. Aifantis: J. Eng. Mater. Technol., 1984, vol. 106, pp. 326–30.10.1115/1.3225725 ↗
3. E.C. Aifantis: Int. J. Plast., 1987, vol. 3, pp. 211–47.10.1016/0749-6419(87)90021-0 ↗
4. E.C. Aifantis: J. Mech. Behav. Mater., 1994, vol. 5, pp. 355–75.10.1515/JMBM.1994.5.3.355 ↗
5. J. Horvath, R. Birringer, and H. Gleiter: Solid State Comm., 1987, vol. 62, pp. 319–22.10.1016/0038-1098(87)90989-6 ↗
6. B.S. Bokhstein and L.I. Trusov: Def. Diffus. Forum, 1993, vols. 95–98, pp. 445–48.10.4028/www.scientific.net/DDF.95-98.445 ↗
7. E.C. Aifantis: J. Appl. Phys., 1979, vol. 50, pp. 1334–38.10.1063/1.326167 ↗
8. E.C. Aifantis: Acta Metall., 1979, vol. 27, pp. 683–91.10.1016/0001-6160(79)90019-1 ↗
9. T.D. Shen, C.C. Koch, T.Y. Tsui, and G.M. Pharr: J. Mater. Res., 1995, vol. 10, pp. 2892–96.10.1557/JMR.1995.2892 ↗
10. J.E. Carsley, J. Ning, W.W. Milligan, S.A. Hackney, and E.C. Aifantis: Nanostr. Mater., 1995, vol. 5, pp. 441–48.10.1016/0965-9773(95)00257-F ↗
11. D.A. Konstantinidis and E.C. Aifantis: Nanostr. Mater., 1998, vol. 10, pp. 1111–18.10.1016/S0965-9773(98)00145-7 ↗
12. M.A. Meyers, A. Mishra, and D.J. Benson: Progr. Mater. Sci., 2006, vol. 51, pp. 427–556.10.1016/j.pmatsci.2005.08.003 ↗
13. C.S. Pande and K.P. Cooper: Progr. Mater. Sci., 2009, vol. 54, pp. 689–706.10.1016/j.pmatsci.2009.03.008 ↗
14. G. Saada and G. Dirras: in Dislocations in Solids, J.P. Hirth and L. Kubin, eds., 2009, pp. 199–248.10.1016/S1572-4859(09)01503-4 ↗
15. K.E. Aifantis and A.A. Konstantinidis: Mater. Sci. Eng. A, 2009, vol. 503, pp. 198–201.10.1016/j.msea.2008.04.084 ↗
16. K.E. Aifantis and A.A. Konstantinidis: Mater. Sci. Eng. B, 2009, vol. 163, pp. 139–44.10.1016/j.mseb.2009.05.010 ↗
17. C.A. Schuh, T.C. Hugnagel, and U. Ramamurty: Acta Mater., 2007, vol. 55, pp. 4067–4109.10.1016/j.actamat.2007.01.052 ↗
18. X.H. Zhu, J.E. Carsley, W.W. Milligan and E.C. Aifantis: Scripta Mater., 1997, vol. 36, pp. 721–26.10.1016/S1359-6462(96)00442-3 ↗
19. J.E. Carsley, W.W. Milligan, X.H. Zhu and E.C. Aifantis: Scripta Mater., 1997, vol. 36, pp. 727-32.10.1016/S1359-6462(96)00443-5 ↗
20. E.C. Aifantis and J.M. Hill: Q. J. Mech. Appl. Math., 1980, vol. 33, pp. 1–21.10.1093/qjmam/33.1.1 ↗
21. J.M. Hill and E.C. Aifantis: Q. J. Mech. Appl. Math., 1980, vol. 33, pp. 23–41.10.1093/qjmam/33.1.23 ↗
22. D.A. Konstantinidis and E.C. Aifantis: Scripta Mater., 1999, vol. 40, pp. 1235–41.10.1016/S1359-6462(99)00118-9 ↗
23. E.C. Aifantis: Mech. Mater., 2003, vol. 35, pp. 259–80.10.1016/S0167-6636(02)00278-8 ↗
24. J. Kioseoglou, G.P. Dimitrakopulos, P. Komninou, T. Karakostas, I. Konstantopoulos, M. Avlonitis, and E.C. Aifantis: Phys. Status Solidi A, 2006, vol. 203, pp. 2161–66.10.1002/pssa.200566018 ↗
25. E.C. Aifantis: Mater. Sci. Eng. A, 2009, vol. 503, pp. 190–97.10.1016/j.msea.2008.04.085 ↗
26. E.C. Aifantis: Dislocations 2008, IOP Conf. Series, W. Cai, K. Edagawa, and A.H.W. Ngan, eds.: Mater. Sci. Eng., 2009, vol. 3, pp. 012026/1–012026/10.10.1088/1757-899X/3/1/012026 ↗
27. K.E. Aifantis and J.R. Willis: J. Mech. Phys. Solids., 2005, vol. 53, pp. 1047–70.10.1016/j.jmps.2004.12.003 ↗
28. K.E. Aifantis and A.H.W. Ngan: Mater. Sci. Eng. A, 2007, vol. 459, pp. 251–61.10.1016/j.msea.2007.01.028 ↗
29. A.S. Khan, B. Farrokh, and L. Takacs: J. Mater. Sci., 2008, vol. 43, pp. 3305–13.10.1007/s10853-008-2508-2 ↗
30. J. Schiøtz, T. Vegge, F.D. di Tolla, and K.W. Jacobsen: Phys. Rev. B, 1999, vol. 60, pp. 11971–83.10.1103/PhysRevB.60.11971 ↗
31. X. Zhang, A.E. Romanov, and E.C. Aifantis: Mater. Sci. Forum, 2011, vols. 667–669, pp. 991–96; also K.E. Aifantis and X. Zhang: ERC/LMM-AUT Report, Aristotle University, Thessaloniki GR, 2010.10.4028/www.scientific.net/MSF.667-669.991 ↗
32. R. Schwaiger, B. Moser, M. Dao, N. Chollacoop, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5159–72.10.1016/S1359-6454(03)00365-3 ↗