A Comparison of Textures Measured Using X-Ray and Electron Backscatter Diffraction
Source abstract
Abstract
Shortly after the initial development of an automated technique for measuring individual crystallographic orientations using electron backscatter diffraction (EBSD), several studies were undertaken to estimate the number of single orientation measurements necessary to achieve the statistics of more conventional texture measurement techniques such as pole figure measurement using X-ray diffraction. Since those early studies, the speed of modern EBSD systems has increased by nearly two orders of magnitude. Thus, the question of statistical reliability relative to X-ray diffraction measurements deserves revisiting. This investigation reconsiders the statistical variances between textures measured using individual orientation measurements and those measured using X-ray diffraction. In particular, textures measured by EBSD and X-ray diffraction in rolled stainless steel and in threaded steel rods are compared. Using comparisons of intensities in the orientation distribution functions (ODFs), volume fractions of key texture components and observed sample symmetry suggest that approximately 10,000 grain orientations need to be sampled in these materials of moderate texture strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. D.J. Dingley: Proc. 8th Int. Conf. on Textures of Materials (ICOTOM 8), J.S. Kallend and G. Gottstein, eds., The Metallurgical Society, Warrendale, PA, 1988, pp. 189–94
2. S.I. Wright: Master’s Thesis, Brigham Young University, Provo, Utah, USA, 1988
3. S.I. Wright, B.L. Adams: Text. Microstr., 1990, vol. 12, pp. 65–7610.1155/TSM.12.65 ↗
4. B.L. Adams, S.I. Wright, K. Kunze: Metall. Trans. A, 1993, vol. 24A, pp. 819–3110.1007/BF02656503 ↗
5. R. Penelle, T. Baudin, P. Paillard, and L. Mora: Text. Microstr., 1991, vol. pp. 597–61010.1155/TSM.14-18.597 ↗
6. T. Baudin, R. Penelle: Metall. Trans. A, 1993, vol. 24A, pp. 2299–231110.1007/BF02648603 ↗
7. O. Engler, G. Gottstein, J. Pospiech, J. Jura: Mater. Sci. Forum, 1994, vols. 157–162, pp. 259–7410.4028/www.scientific.net/MSF.157-162.259 ↗
8. O. Engler, P. Yang, G. Gottstein, J. Jura, J. Pospiech: Mater. Sci. Forum, 1994, vols. 157–162, pp. 933–3810.4028/www.scientific.net/MSF.157-162.933 ↗
9. P. Paillard, T. Baudin, R. Penelle: Mater. Sci. Forum, 1994, vols. 157–162, pp. 1027–3210.4028/www.scientific.net/MSF.157-162.1027 ↗
10. J. Pospiech, J. Jura, G. Gottstein: Mater. Sci. Forum, 1994, vols. 157–162, pp. 407–1210.4028/www.scientific.net/MSF.157-162.407 ↗
11. T. Baudin, J. Jura, R. Penelle, J. Pospiech: J. Appl. Cryst., 1995, vol. 28, pp. 582–8910.1107/S0021889895004432 ↗
12. S. Matthies, F. Wagner: Phys. Status Solidi (b), 1996, vol. 196, pp. K11–K1510.1002/pssb.2221960225 ↗
13. S.I. Wright and U.F. Kocks: Proc. 11th Int. Conf. on Textures of Materials (ICOTOM 11), Z. Liang, L. Zuo, and Y. Chu, eds., International Academic Publishers, Xi’an, China, 1996, pp. 53–62
14. K. Mehnert, H.S. Ubhi, and A.P. Day: Proc. 12th Int. Conf. on Textures of Materials, J.A. Szpunar, ed., NRC Research Press, Ottawa, ON, Canada, 1999, pp. 217–22
15. F. Wagner, S. Matthies, O. Van Landuyt: Mater. Sci. Forum, 1998, vols. 273–275, pp. 89–9810.4028/www.scientific.net/MSF.273-275.89 ↗
16. O. Engler, J. Jura, and S. Matthies: Proc. 12th Int. Conf. on Textures of Materials, J.A. Szpunar, ed., NRC Research Press, Ottawa, ON, Canada, 1999, pp. 68–73
17. F. Wagner, H.R. Wenk, C. Esling, H.J. Bunge: Physica Status Solidi (a), 1981, vol. 67, pp. 269–8510.1002/pssa.2210670127 ↗
18. W.B. Hutchinson, E. Lindh, and P. Bate: Proc. 12th Int. Conf. on Textures of Materials, J. A. Szpunar eds., NRC Research Press, Ottawa, Ontario, Canada, 1999, pp. 34–39
19. J.J. Kearns: Thermal Expansion and Preferred Orientation in Zircaloy (LWBR Development Program), WAPD-TM-472, Bettis Atomic Power Lab, Pittsburgh, PA, USA, 1965
20. S.I. Wright, B.L. Adams: Metall. Trans. A, 1992, vol. 23, pp. 759–6710.1007/BF02675553 ↗
21. C. Detavernier and C. Lavoie: in Materials Science Forum, P. Van Houtte and L. Kestens, eds., Trans Tech Publications, Aedermannsdorf, Switzerland, 2005, vols. 495–497, pp. 1333–4210.4028/www.scientific.net/MSF.495-497.1333 ↗
22. I. Samajdar, B. Verlinden, L. Kestens, P. Van Houtte: Acta Mater., 1999, vol. 47, pp. 55–6510.1016/S1359-6454(98)00337-1 ↗
23. L. Vanasupa, Y.-C. Joo, P.R. Besser, and S. Pramanick: J. Appl. Phys., 1999, vol. 85, pp10.1063/1.369624 ↗
24. N.A. Rutter, B.A. Glowacki: IEEE Trans. Appl. Supercond., 2001, vol. 11, pp. 2730–3310.1109/77.919627 ↗
25. O. Engler: Acta Mater., 2001, vol. 49, pp. 1237–4710.1016/S1359-6454(01)00017-9 ↗
26. F. Caleyo, T. Baudin, R. Penelle: Scripta Mater., 2002, vol. 46, pp. 829–3510.1016/S1359-6462(02)00039-8 ↗
27. K.K. Park, J.-H. Cho, H.N. Man, H.-C. Lee, and K.H. Oh: Key. Eng. Mat., 2003, vols. 233-236, pp. 567–7210.4028/www.scientific.net/KEM.233-236.567 ↗
28. S.W. Banovic, M.D. Vaudin, T.H. Gnaeupel-Herold, D.M. Saylor, K.P. Rodbell: Mater. Sci. Eng. A, 2004, vol. 380, pp. 155–7010.1016/j.msea.2004.03.084 ↗
29. A.A. Rasmussen, A. Gholinia, P.W. Trimby, M.A.J. Somers: Mater. Sci. Forum, 2004, vols. 467–470 pp. 1345–5010.4028/www.scientific.net/MSF.467-470.1345 ↗
30. R.K. Ray, J.J. Jonas, R.E. Hook: Int. Mater. Rev., 1993, vol. 39, pp. 129–7210.1179/imr.1994.39.4.129 ↗
31. A.D. Rollett and S.I. Wright: in Texture and Anisotropy, U. F. Kocks, C. Tomé, and H.-R. Wenk, eds., Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 178–239
32. J.S. Kallend, U.F. Kocks, A.D. Rollett, H.-R. Wenk: Mater. Sci. Eng., 1991, vol. A132, pp. 1–1110.1016/0921-5093(91)90355-Q ↗
33. S. Matthies, G.W. Vinel: Phys. Status Solidi (b), 1982, vol. 112, pp. K111–K12010.1002/pssb.2221120254 ↗
34. S. Matthies, H.R. Wenk, G.W. Vinel: J. Appl. Cryst., 1988, vol. 21, pp. 285–30410.1107/S0021889888000275 ↗
35. H.-J. Bunge: Texture Analysis in Materials Science. Mathematical Methods, Butterworth and Co., London, 1982
36. J.-H. Cho, A.D. Rollett, K.H. Oh: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1075–8610.1007/s11661-004-0033-8 ↗
37. U.F. Kocks, J.S. Kallend, A.C. Biondo: Text. Microstr., 1991, vols. 14–18, pp. 199–20410.1155/TSM.14-18.199 ↗
38. H. Jin, D.J. Lloyd: Mater. Sci. Eng. A, 2005, vol. 399, pp. 358–6710.1016/j.msea.2005.04.027 ↗
39. P. Sonnweber-Ribic, P. Gruber, G. Dehm, E. Arzt: Acta Mater., 2006, vol. 54, pp. 3863–7010.1016/j.actamat.2006.03.057 ↗
40. P.A. Hollinshead: in Aluminum Alloys for Packaging II, J.G. Morris, S.K. Das, and H.S. Goorich, eds., TMS, Warrendale, PA, 1996, pp. 117–27
41. S.I. Wright: Mater. Sci. Technol., 2006, vol. 22, pp. 1287–9610.1179/174328406X130876 ↗
42. D.P. Field: Ultramicroscopy, 1997, vol. 67, pp. 1–910.1016/S0304-3991(96)00104-0 ↗
43. M.G. Glavicic, P.A. Kobryn, S.L. Semiatin: Mater. Sci. Eng. A, 2004, vol. 385, pp. 372–7610.1016/j.msea.2004.07.036 ↗
44. H.-R. Wenk: J. Appl. Cryst., 1991, vol. 24, pp. 920–2710.1107/S0021889891004661 ↗
45. K. Ullemeyer, G. Braun, M. Dahms, J.K. Krul, N.O. Olesen, S. Siegesmund: J. Struct. Geol., 2000, vol. 22, pp. 1541–5710.1016/S0191-8141(00)00103-6 ↗
46. H.E. Vatne, A. Oscarsson, O. Engler, H. Weiland, A. Reeves, P. S. Bate, P. Van Houtte, X.-H. Zeng, C. Johnson, J. J. Fundenberger, Y. Zhou, R. Fillit, E. Cerri, and H.-J. Bunge: Proc. 11th Int. Conf. on Textures of Materials ( ICOTOM-11), Z. Liang, L. Zuo and Y. Chu, eds., International Academic Publishers, Beijing, 1996, pp. 191–96