journal article·2004-06

The effect of silicon content on the microstructure and creep behavior in die-cast magnesium AS alloys

M. S. Dargusch, G. L. Dunlop, A. L. Bowles, K. Pettersen, P. Bakke

Publisher page

Abstract

The effect of increasing levels of silicon on the microstructure and creep properties of high-pressure die-cast Mg-Al-Si (AS) alloys has been investigated. The morphology of the Mg2Si phase in die-cast AS alloys was found to be a function of the silicon content. The Mg2Si particles in castings with up to 1.14 wt pct Si have a Chinese script morphology. For AS21 alloys with silicon contents greater than 1.4 wt pet Si (greater than the alpha-Mg2Si binary eutectic point), some Mg2Si particles have a coarse blocky shape. Increasing the silicon content above the eutectic level results in an increase in the number of coarse faceted Mg2Si particles in the microstructure. Creep rates at 100 hours were found to decrease with increasing silicon content in AS-type alloys. The decrease in creep rate was most dramatic for silicon contents up to 1.1 wt pct. Further additions of silicon of up to 2.64 wt pct also resulted in significant decreases in creep rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. O. Holta, M. Videm, H. Westengen, and D.L. Albright: Trans. NADCA 18th Int. Die Casting Congr. and Expo., North American Die Casting Association, Indianapolis, In, 1995, pp. 177–82.
2. T.K. Aune and T.J. Ruden: SAE Trans.: J. Mater. Manufacturing, 1992, vol. 105, pp. 1–7.
3. T.K. Aune and H. Westengen: SAE Trans.: J. Mater. Manufacturing, 1995, vol. 104, pp. 332–42.
4. G.S. Foerster: 33rd Annual World Magnesium Conf., International Magnesium Association, Dayton, OH, 1976, pp. 35–39.
5. A. Luo and M.O. Pekguleryuz: J. Mater. Sci., 1994, vol. 29, pp. 5259–71.10.1007/BF01171534 ↗
6. W.E.I. Mercer: SAE Technical Paper Series, SAE, 1990, paper no. 900788. Society of Automotive Engineers, Inc., USA, Warrendale, PA.
7. J.S. Waltrip: 47th Annual World Magnesium Conf., International Magnesium Association, Cannes, 1990, pp. 124–29.
8. ASM Specialty Handbook, M.M. Avedesian and H. Baker, eds. ASM International, Materials Park, OH, 1999.
9. B. Bronfin, M. Katsir, and E. Aghion: Mater. Sci. Eng., 2001, vol. A302, pp. 46–50.10.1016/S0921-5093(00)01352-6 ↗
10. M.S. Dargusch: Ph.D. Thesis, The University of Queensland, Brisbane, 1998.
11. M.S. Dargusch, G.L. Dunlop, and K. Pettersen: in Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informations GmbH, Wolfsburg, 1998, pp. 277–82.
12. M.S. Dargusch, K. Pettersen, and G.L. Dunlop: in Transactions of the North American Die Casting Association, NADCA, Minneapolis, MN, 1997, pp. 131–39.
13. I.P. Moreno, T.K. Nandy, J.W. Jones, J.E. Allison, and T.M. Pollock: Magnesium Technology 2002, Seattle, WA, 2002, TMS, Warrendale, PA, 2002, pp. 111–16.
14. K. Pettersen, P. Bakke, and D. Albright: Magnesium Technology 2002, Seattle, NA, 2002, TMS, Warrendale, PA, 2002, pp. 241–46.
15. P. Bakke and K. Pettersen: Materials Week 2002—Proc., Werkstoffwoche-Partnerschaft GbR, ed., Werkstoff Informationsgesellschaft mbH, Frankfurt, 2002.