Design of Novel Precipitate-Strengthened Al-Co-Cr-Fe-Nb-Ni High-Entropy Superalloys
Source abstract
Abstract
A series of non-equiatomic Al-Co-Cr-Fe-Nb-Ni high-entropy alloys, with varying levels of Co, Nb and Fe, were investigated in an effort to obtain microstructures similar to conventional Ni-based superalloys. Elevated levels of Co were observed to significantly decrease the solvus temperature of the γ′ precipitates. Both Nb and Co in excessive concentrations promoted the formation of Laves and NiAl phases that formed either during solidification and remained undissolved during homogenization or upon high-temperature aging. Lowering the content of Nb, Co, or Fe prevented the formation of the eutectic type Laves. In addition, lowering the Co content resulted in a higher number density and volume fraction of the γ′ precipitates, while increasing the Fe content led to the destabilization of the γ′ precipitates. Various aging treatments were performed which led to different size distributions of the strengthening phase. Results from the microstructural characterization and hardness property assessments of these high-entropy alloys were compared to a commercial, high-strength Ni-based superalloy RR1000. Potentially, precipitation-strengthened high-entropy alloys could find applications replacing Ni-based superalloys as structural materials in power generation applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. D.B. Miracle and O.N. Senkov: Acta Mater., 2017, vol. 122, pp. 448–511.10.1016/j.actamat.2016.08.081 ↗
2. M.-H. Tsai and J.-W. Yeh: Mater. Res. Lett., 2014, vol. 2, pp. 107–23.10.1080/21663831.2014.912690 ↗
3. A.C. Yeh, Y.J. Chang, C.W. Tsai, Y.C. Wang, J.W. Yeh, and C.M. Kuo: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2014, vol. 45, pp. 184–90.10.1007/s11661-013-2097-9 ↗
4. J.-W. Yeh, S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, T.-T. Shun, C.-H. Tsau, and S.-Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303.10.1002/adem.200300567 ↗
5. J. Yeh: Ann. Chim. Sci. des Matériaux, 2006, vol. 31, pp. 633–48.10.3166/acsm.31.633-648 ↗
6. K.Y. Tsai, M.H. Tsai, and J.W. Yeh: Acta Mater., 2013, vol. 61, pp. 4887–97.10.1016/j.actamat.2013.04.058 ↗
7. J.J. Licavoli, M.C. Gao, J.S. Sears, P.D. Jablonski, and J.A. Hawk: J. Mater. Eng. Perform., 2015, vol. 24, pp. 3685–98.10.1007/s11665-015-1679-7 ↗
8. M.A. Hemphill, T. Yuan, G.Y. Wang, J.W. Yeh, C.W. Tsai, A. Chuang, and P.K. Liaw: Acta Mater., 2012, vol. 60, pp. 5723–34.10.1016/j.actamat.2012.06.046 ↗
9. Y.Y. Chen, T. Duval, U.D. Hung, J.W. Yeh, and H.C. Shih: Corros. Sci., 2005, vol. 47, pp. 2257–79.10.1016/j.corsci.2004.11.008 ↗
10. H.M. Daoud, A.M. Manzoni, R. Völkl, N. Wanderka, and U. Glatzel: Adv. Eng. Mater., 2015, vol. 17, pp. 1134–41.10.1002/adem.201500179 ↗
11. H.-P. Chou, Y.-S. Chang, S.-K. Chen, and J.-W. Yeh: Mater. Sci. Eng. B, 2009, vol. 163, pp. 184–9.10.1016/j.mseb.2009.05.024 ↗
12. Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, and Z.P. Lu: Prog. Mater. Sci., 2014, vol. 61, pp. 1–93.10.1016/j.pmatsci.2013.10.001 ↗
13. P.D. Jablonski, J.J. Licavoli, M.C. Gao, and J.A. Hawk: JOM, 2015, vol. 67, pp. 2278–87.10.1007/s11837-015-1540-3 ↗
14. C. Ng, S. Guo, J. Luan, S. Shi, and C.T. Liu: Intermetallics, 2012, vol. 31, pp. 165–72.10.1016/j.intermet.2012.07.001 ↗
15. E.J. Pickering, R. Muñoz-Moreno, H.J. Stone, and N.G. Jones: Scr. Mater., 2016, vol. 113, pp. 106–9.10.1016/j.scriptamat.2015.10.025 ↗
16. J.Y. He, H. Wang, Y. Wu, X.J. Liu, H.H. Mao, T.G. Nieh, and Z.P. Lu: Intermetallics, 2016, vol. 79, pp. 41–52.10.1016/j.intermet.2016.09.005 ↗
17. H.M. Daoud, A. Manzoni, R. Völkl, N. Wanderka, and U. Glatzel: JOM, 2013, vol. 65, pp. 1805–14.10.1007/s11837-013-0756-3 ↗
18. E.J. Pickering, H.J. Stone, and N.G. Jones: Mater. Sci. Eng. A, 2015, vol. 645, pp. 65–71.10.1016/j.msea.2015.08.010 ↗
19. B. Gwalani, V. Soni, D. Choudhuri, M. Lee, J.Y. Hwang, S.J. Nam, H. Ryu, S.H. Hong, and R. Banerjee: Scr. Mater., 2016, vol. 123, pp. 130–4.10.1016/j.scriptamat.2016.06.019 ↗
20. N.G. Jones, R. Izzo, P.M. Mignanelli, K.A. Christofidou, and H.J. Stone: Intermetallics, 2016, vol. 71, pp. 43–50.10.1016/j.intermet.2015.12.001 ↗
21. M. Gao and D. Alman: Entropy, 2013, vol. 15, pp. 4504–19.10.3390/e15104504 ↗
22. T.M. Butler and M.L. Weaver: J. Alloys Compd., 2017, vol. 691, pp. 119–29.10.1016/j.jallcom.2016.08.121 ↗
23. F. Zhang, C. Zhang, S.L. Chen, J. Zhu, W.S. Cao, and U.R. Kattner: Calphad, 2014, vol. 45, pp. 1–10.10.1016/j.calphad.2013.10.006 ↗
24. H.M. Daoud, A.M. Manzoni, N. Wanderka, and U. Glatzel: JOM, 2015, vol. 67, pp. 2271–77.10.1007/s11837-015-1484-7 ↗
25. T.-K. Tsao, A.-C. Yeh, C.-M. Kuo, and H. Murakami: Adv. Eng. Mater., 2017, vol. 19, p. 1600475.10.1002/adem.201600475 ↗
26. O. Senkov, D. Isheim, D. Seidman, and A. Pilchak: Entropy, 2016, vol. 18, p. 102.10.3390/e18030102 ↗
27. S. Antonov, M. Detrois, D. Isheim, D.N. Seidman, R.C. Helmink, R.L. Goetz, E. Sun, and S. Tin: Mater. Des., 2015, vol. 86, pp. 649–55.10.1016/j.matdes.2015.07.171 ↗
28. J.-O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
29. S. Guo and C.T. Liu: Prog. Nat. Sci. Mater. Int., 2011, vol. 21, pp. 433–46.10.1016/S1002-0071(12)60080-X ↗
30. A. Takeuchi and A. Inoue: Mater. Trans. JIM, 2000, vol. 41, pp. 1372–8.10.2320/matertrans1989.41.1372 ↗
31. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–5.10.1038/nmeth.2089 ↗
32. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.-Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak, and A. Cardona: Nat. Methods, 2012, vol. 9, pp. 676–82.10.1038/nmeth.2019 ↗
33. B.H. Toby and R.B. Von Dreele: J. Appl. Crystallogr., 2013, vol. 46, pp. 544–9.10.1107/S0021889813003531 ↗
34. K. Momma and F. Izumi: J. Appl. Crystallogr., 2011, vol. 44, pp. 1272–6.10.1107/S0021889811038970 ↗
35. W.H. Liu, J.Y. He, H.L. Huang, H. Wang, Z.P. Lu, and C.T. Liu: Intermetallics, 2015, vol. 60, pp. 1–8.10.1016/j.intermet.2015.01.004 ↗
36. S. Guo, C. Ng, J. Lu, and C.T. Liu: J. Appl. Phys., 2011, vol. 109, p. 103505.10.1063/1.3587228 ↗
37. M.C. Hardy, B. Zirbel, G. Shen, and R. Shenkar: in Superalloys 2004 (Tenth International Symposium), TMS, 2004, pp. 83–90.10.7449/2004/Superalloys_2004_83_90 ↗
38. J.D. Livingston: Phys. Status Solidi, 1992, vol. 131, pp. 415–23.10.1002/pssa.2211310215 ↗
39. S.G. Ma and Y. Zhang: Mater. Sci. Eng. A, 2012, vol. 532, pp. 480–6.10.1016/j.msea.2011.10.110 ↗
40. K.W. Li, X.B. Wang, S.M. Li, W.X. Wang, S.P. Chen, D.Q. Gong, and J.L. Cui: High Temp. Mater. Process., 2015, vol. 34, pp. 479–85.
41. M.J. Cieslak: in Superalloys 718, 625 and Various Derivatives (1991), TMS, 1991, pp. 71–80.
42. J.K. Pargeter and W. Hume-Rothery: J. Less Common Met., 1967, vol. 12, pp. 366–74.10.1016/0022-5088(67)90004-5 ↗
43. A.K. Jena and M.C. Chaturvedi: J. Mater. Sci., 1984, vol. 19, pp. 3121–39.10.1007/BF00549796 ↗
44. N. El-Bagoury, T. Matsuba, K. Yamamoto, H. Miyahara, and K. Ogi: Mater. Trans., 2005, vol. 46, pp. 2478–83.10.2320/matertrans.46.2478 ↗