journal article·2016-08

Study of Internal Channel Surface Roughnesses Manufactured by Selective Laser Melting in Aluminum and Titanium Alloys

Jukka Pakkanen, Flaviana Calignano, Francesco Trevisan, Massimo Lorusso, Elisa Paola Ambrosio, Diego Manfredi, Paolo Fino

Publisher page

Abstract

Interest in additive manufacturing (AM) has gained considerable impetus over the past decade. One of the driving factors for AM success is the ability to create unique designs with intrinsic characteristics as, e.g., internal channels used for hydraulic components, cooling channels, and heat exchangers. However, a couple of the main problems in internal channels manufactured by AM technologies are the high surface roughness obtained and the distortion of the channel shape. There is still much to understand in these design aspects. In this study, a cylindrical geometry for internal channels to be built with different angles with respect to the building plane in AlSi10Mg and Ti6Al4V alloys by selective laser melting was considered. The internal surfaces of the channels produced in both materials were analyzed by means of a surface roughness tester and by optical and electron microscopy to evaluate the effects of the material and design choices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. C. Klahn, B. Leutenecker, and M. Meboldt: 24th CIRP Design Conference Proceedings CIRP 00, Milan, 2014.
2. 2. J. Kranz, D. Herzog, and C. Emmelmann: J. Laser Appl., 2015, vol. 27 (S1), pp. 1–14.10.2351/1.4885235 ↗
3. D. Thomas: Ph.D. thesis, University of Wales Institute, Cardiff, United Kingdom, 2009.
4. 4. F. Calignano: Mater. Des., 2014, vol. 64, pp. 203–13.10.1016/j.matdes.2014.07.043 ↗
5. E. Atzeni and A. Salmi: J. Manuf. Process., 2015, vol. 20, pp. 500–06.10.1016/j.jmapro.2015.04.004 ↗
6. D.E. Cooper, M. Stanford, K.A. Kibble, and G.J. Gibbons: Materials & Design. 2012, vol. 41, pp. 226–30.10.1016/j.matdes.2012.05.017 ↗
7. F. Calignano, D. Manfredi, E.P. Ambrosio, S. Biamino, M. Pavese, and P. Fino: 24th CIRP Design Conference Proceedings CIRP 00, Milan, 2014.
8. 8. L. Thijs, K. Kempen, J.P. Kruth, and J.V. Humbeeck: Acta Mater., 2013, vol. 61, pp. 1809–19.10.1016/j.actamat.2012.11.052 ↗
9. 9. C. Yan, L. Hao, A. Hussein, and D. Raymont: Int. J. Mach. Tools Manufacture, 2012, vol. 62, pp. 32–38.10.1016/j.ijmachtools.2012.06.002 ↗
10. 10. A. Gebhardt: Understanding Additive Manufacturing, Hanser Publishers, Munich, 2011.10.3139/9783446431621 ↗
11. 11. F. Calignano, D. Manfredi, E.P. Ambrosio, L. Iuliano, and P. Fino: Int. J. Adv. Manufact. Technol., 2013, vol. 67, pp. 2743–51.10.1007/s00170-012-4688-9 ↗
12. C. Semini, J. Goldsmith, D. Manfredi, F. Calignano, E.P. Ambrosio, J. Pakkanen, and D.G. Caldwell: International Conference on Advanced Robotics Proceedings, Istanbul, 2015, pp. 123–2910.1109/ICAR.2015.7251444 ↗
13. 13. D. Manfredi, F. Calignano, E.P. Ambrosio, M. Krishnan, R. Canali, S. Biamino, M. Pavese, E. Atzeni, L. Iuliano, P. Fino, and C. Badini: La Metall. Ital., 2013, vol. 10, pp. 1–10.
14. 14. G. Strano, L. Hao, R.M. Everson, and K.E. Evans: J. Mater. Processing Technol., 2013, vol. 213, pp. 589–97.10.1016/j.jmatprotec.2012.11.011 ↗
15. T.A. Krol, C. Seidel, and M.F. Zaeh: Proceedings of the CIRP 12, Ischia, 2012.10.1016/j.procir.2013.09.030 ↗
16. 16. L.W. Mays: Hydraulic Design Handbook, McGraw-Hill Education, Milan, 1999.
17. Fluid Power, Control and Actuation Products on the Boeing 747-400. Brochure, Vickers Aerospace, London, 1993.
18. 18. D. Buchbinder, H. Schleifenbaum, S. Heidrich, W. Meiners, and J. Bueltmann: Phys. Proc., 2011, vol. 12, pp. 271–78.10.1016/j.phpro.2011.03.035 ↗
19. 19. K. Bartkowiak, S. Ullrich, T. Frick, and M. Schmidt: Phys. Proc., 2011, vol. 12, pp. 393–401.10.1016/j.phpro.2011.03.050 ↗
20. 20. E. Brandl, U. Heckenberger, V. Holzinger, and D. Buchbinder: Mater. Design, 2012, vol. 34, pp. 159–69.10.1016/j.matdes.2011.07.067 ↗
21. 21. D. Manfredi, F. Calignano, M. Krishnan, R. Canali, E.P. Ambrosio, S. Biamino, D. Ugues, M. Pavese, and P. Fino: Light Metal Alloys Applications, InTech, Rijeka, 2014, pp. 1–32.
22. G. Augustin: Res. Pap. Faculty Mater. Sci. Technol. Slovak Univ. Technol., 2011, vol. 19, pp. 19–24.
23. J. Rodriguez, J. Johansson, and T. Edeskär: Proceedings of Nordic Conference on Soil Mechanics and Geotechnical NGM, Copenhagen, 2012
24. 24. S. Sivasankar, R. Jeyapaul, S. Kolappan, and N.M. Shaahid: Comput. Modell. New Technol, 2012, vol. 16 (1), pp. 49–63.
25. Geometical product specifications (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters, ISO 4287, International Organization for Standardization, Geneva, 1998.