Microstructure and texture of hot-rolled Cb-Ti and V-Cb microalloyed steels with differences in formability and toughness
Source abstract
Abstract
The relationship between microstructure and formability (also toughness) of industrially processed Cb-Ti and V-Cb steels with similar yield strength of about 600 MPa and total elongation of 20 pct was examined. The steels were processed under similar conditions and any variations in processing history were unintentional. Cb-Ti steels exhibited superior formability and toughness in relation to V-Cb steels. The improved formability and toughness of Cb-Ti steels is attributed to the cumulative contribution of relatively finer grain size, narrow ferrite grain size distribution, inherently more ductile behavior and microplasticity, the reduced intensity of {100}〈011〉 texture, and slightly higher intensity of the desired {332}〈113〉 texture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. R.D.K. Misra, G.C. Weatherly, J.E. Hartmann, and A.J. Boucek: Mater. Sci. Technol., 2001, vol. 17, p. 1119.10.1179/026708301101511040 ↗
2. R.D.K. Misra, S.W. Thompson, T.A. Hylton, and A.J. Boucek: Metall. Mater. Trans. A, 2001, vol. 32A, p. 745.10.1007/s11661-001-0090-1 ↗
3. R.R. Hilson, T.E. Fine, and G.J. Hansen: Microalloying ’75, Union Carbide, New York, NY, 1977, pp. 654–64.
4. Y.J. Park, A.P. Coldren, and J.W. Morrow: in Fundamentals of Dual-Phase Steels, R.A. Kot and B.L. Bramfitt, eds., TMS-AIME, New York, NY, 1981, pp. 485–97.
5. R.D.K. Misra: University of Louisiana at Lafayette, Lafayette, LA, unpublished work, (2001).
6. A. Nishimoto, Y. Hosoya, and K. Nakaoka: in Fundamentals of Dual-Phase Steels, R.A. Kot and B.L. Bramfitt, eds., TMS-AIME, Warrendale, PA, 1981, pp. 447–63.
7. R.D. Adamczyk and D.W. Dickson: J. Appl. Metalworking, 1986, vol. 4, p. 157.10.1007/BF02834379 ↗
8. 1989 Annual Book of ASTM Standards, ASTM Designation E 8, ASTM, Philadelphia, PA, 1989, vol. 03.01, p. 131.
9. J.S. Kallend, U.F. Kocks, A.D. Rollet, and H.-R. Wend: Mater. Sci. Eng., 1991, vol. A132, p. 1.10.1016/0921-5093(91)90355-Q ↗
10. R.-J. Roe: J. Appl. Phys., 1965, vol. 36, p. 2024.10.1063/1.1714396 ↗
11. H.J. Bunge: Z. Metallkd., 1965, vol. 56, p. 872.
12. R.E. Hook: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 2009–19.10.1007/BF02666336 ↗
13. ASTM Annual Book of Standards, E-290, ASTM, Philadelphia, PA, 1993, pp. 335–38.
14. R. Speich and R.L. Miller: Proc. Int. Conf. on Solid-Solid Phase Transformations, H.I. Aaronson, D.E. Laughlin, R.F. Sekerka, and C.M. Wayman, eds., TMS-AIME, Warrendale, PA, 1982, pp. 843–48.
15. P. Chouqet, P. Fabregue, J. Giusti, B. Chamont, J.N. Pezant, and F. Blanchet: in Mathematical Modelling of Hot Rolling of Steels, S. Yue, ed., TMS-CIM, Montreal, 1990, pp. 34–43.
16. M. Charleaux, W.J. Poole, M. Militzer, and A. Deschamp: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1635–47.10.1007/s11661-001-0142-6 ↗
17. E. Nes: Progr. Mater. Sci., 1997, vol. 41, pp. 129–93.10.1016/S0079-6425(97)00032-7 ↗
18. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1992.
19. R.K. Ray and J.J. Jonas: Int. Met. Rev., 1990, vol. 35, pp. 1–36.10.1179/095066090790324046 ↗
20. PH. Lequeu and J.J. Jonas: Metall. Trans. A, 1988, vol. 19A, pp. 105–08.10.1007/BF02669819 ↗
21. H. Inagaki, K. Kurihara, and I. Kozasu: Trans. Iron Steel Inst. Jpn., 1977, vol. 17, pp. 75–83.10.2355/isijinternational1966.17.75 ↗
22. R. Shoefield, G. Rowntree, N.V. Sarma, and R.T. Weiner: Met. Technol., 1974, vol. 1, p. 32510.1179/030716974803288112 ↗
23. B.L. Bramfit and A.R. Marder: Metall. Trans. A, 1977, vol. 8A, pp. 1263–73.10.1007/BF02643841 ↗
24. G. Baldi and G. Buzzichelli: Met. Sci., 1978, vol. 9A, p. 509.
25. D.I. Bourelli: Metall. Trans. A, 1983, vol. 14A, p. 2487.10.1007/BF02668890 ↗
26. D.L. Bourelli and O.D. Sherby: Metall. Trans. A, 1983, vol. 14A, pp. 2563–66.10.1007/BF02668900 ↗
27. H. Inagaki and M. Kodama: J. Iron Steel Inst. Jpn., 1981, vol. 67, p. 640.
28. S. Hashimoto, T. Yakushiji, T. Kashima, and K. Hosami: Proc. Int. Conf. on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals, Iron Steel Institute of Japan, Tokyo, 1988, vol. 2, p. 652.