The effects of alloy microstructure refinement on the short-term thermal oxidation of NiCoCrAlY alloys
Source abstract
Abstract
Three γ + β NiCoCrAlY alloys (a cast alloy, a laser-surface-melted (LSM) alloy, and a coating as deposited by electron beam-physical vapor deposition (EB-PVD)) with similar average composition (Ni-20Co-19Cr-24Al-0.2Y in at. pct), but with different microstructures prior to oxidation, were oxidized for 0.5 and 1 hours at 1373 K in an Ar 20 vol pct O2 atmosphere (i.e., at a partial oxygen pressure of 20 kPa). It was found that on the alloy with β precipitates larger than 20 µm, the oxide layer was nonuniform in thickness, and had a laterally inhomogeneous composition and phase constitution. In this case, the oxide layer developed on top of the γ phase was thicker than that formed on top of the β phase and consisted of a NiCr2O4/Cr2O3 outer and an α-Al2O3 inner layer. For the thinner oxide formed on top of the β phase, the outer layer was constituted of a Cr and Co containing NiAl2O4 spinel and the inner layer also consisted of α-Al2O3. For the alloys with β precipitates smaller than 3 µm, a uniform and laterally homogeneous oxide formed, consisting of a Cr and Co containing NiAl2O4 outer layer on top of an α-Al2O3 inner layer. After oxidation, Y was distributed as numerous, small precipitates within the oxide layer for a homogeneous Y distribution prior to oxidation, or as a few, very large pegs along the γ/β phase boundaries of the alloy for an inhomogeneous Y distribution prior to oxidation. The performance of the alloys upon thermal cycling was improved for smaller β precipitates and for a more homogeneous Y distribution in the alloy prior to oxidation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. J.R. Nicholls: JOM, 2000, vol. 52, pp. 28–35.10.1007/s11837-000-0112-2 ↗
2. G.W. Goward: Surf. Coating Technol., 1998, vols. 108–109, pp. 73–79.10.1016/S0257-8972(98)00667-7 ↗
3. R. Mévrel: Mater. Sci. Eng., A, 1989, vol. 120A, pp. 13–24.10.1016/0921-5093(89)90713-2 ↗
4. C. Leyens, U. Schulz, K. Fritscher, M. Bartsch, M. Peters, and W.A. Kaysser: Z. Metalkd., 2001, vol. 92, pp. 762–72.
5. P. Kofstad: High Temperature Corrosion, Elsevier Applied Science, New York, NY, 1988, pp. 342–424.
6. C.S. Giggins and F.S. Pettit: J. Electrochem. Soc., 1971, vol. 118, pp. 1782–90.10.1149/1.2407837 ↗
7. J.L. Smialek and R. Gibala: Metall. Trans. A, 1983, vol. 14A, pp. 2143–61.10.1007/BF02662381 ↗
8. C. Mennicke, D.R. Mumm, and D.R. Clarke: Z. Metallkd., 1999, vol. 90, pp. 1079–84.
9. C.G. Levi, E. Sommer, S.G. Terry, A. Catanoiu, and M. Rühle: J. Am. Ceram. Soc., 2003, vol. 86, pp. 676–85.10.1111/j.1151-2916.2003.tb03357.x ↗
10. T.J. Nijdam, L.P.H. Jeurgens, and W.G. Sloof: Acta Mater., 2003, vol. 51, pp. 5295–307.10.1016/S1359-6454(03)00381-1 ↗
11. T.J. Nijdam, L.P.H. Jeurgens, and W.G. Sloof: Acta Mater., 2005, vol. 53, pp. 1643–53.10.1016/j.actamat.2004.12.014 ↗
12. K. Fritscher, C. Leyens, U. Schulz, H.J. Rätzer-Scheibe, M. Peters, and W.A. Kaysser: in Microscopy of Oxidation 3, S.B. Newcomb and J.A. Little, eds., The Institute of Metals, London, 1997, pp. 352–65.
13. T.J. Nijdam, L.P.H. Jeurgens, J.H. Chen, and W.G. Sloof: Oxid. Met., 2005, vol. 64, pp. 355–77.10.1007/s11085-005-8532-6 ↗
14. Ge Wang, B. Gleeson, and D.L. Douglass: Oxid. Met., 1991, vol. 35, pp. 333–48.10.1007/BF00664707 ↗
15. F. Gesmundo and B. Gleeson: Oxid. Met., 1995, vol. 44, pp. 211–37.10.1007/BF01046728 ↗
16. M.P. Brady, B. Gleeson, and I.G. Wright: JOM, 2000, vol. 52, pp. 16–21.10.1007/s11837-000-0109-x ↗
17. Y. Niu, J.X. Song, F. Gesmundo, and G. Farné: Oxid. Met., 2001, vol. 55, pp. 291–305.10.1023/A:1010312227843 ↗
18. G.Y. Fu, Y. Niu, and F. Gesmundo: Corr. Sci., 2003, vol. 45, pp. 559–74.10.1016/S0010-938X(02)00141-5 ↗
19. J.G. Smeggil, A.W. Funkenbusch, and N.S. Bornstein: Thin Solid Films, 1984, vol. 119, pp. 327–35.10.1016/0040-6090(84)90016-6 ↗
20. D.P. Moon: Mater. Sci. Technol., 1989, vol. 5, pp. 754–64.10.1179/mst.1989.5.8.754 ↗
21. R. Muñoz-Arroyo, D. Clemens, F. Tietz, R. Anton, J. Quadakkers, and L. Singheiser: Mater. Sci. Forum, 2001, vols. 369–372, pp. 165–72.10.4028/www.scientific.net/MSF.369-372.165 ↗
22. C. Kwakernaak, T.J. Nijdam, and W.G. Sloof, Metall. Mater. Trans. A, 2006, vol. 37A.10.1007/s11661-006-0041-y ↗
23. V.G.M. Sivel, J. van den Brand, W.R. Wang, H. Mohdadi, F.D. Tichelaar, P.F.A. Alkemade, and H.W. Zandbergen: J. Microsc., 2004, vol. 214, pp. 237–45.10.1111/j.0022-2720.2004.01329.x ↗
24. R. Autrata, P. Schauer, J. Kvapil, and J. Kvapil: J. Phys. E: Sci. Instrum., 1978, vol. 11, pp. 707–08.10.1088/0022-3735/11/7/028 ↗
25. Multipak Software Manual, version 6.0, Physical Electronics, Eden Prairie, MN, 1997.
26. Handbook of Auger Electron Spectroscopy, 3rd ed., Physical Electronics, Eden Prairie, MN, 1995, p. 397.
27. Powder Diffraction File 46-1212, International Center for Diffraction Data (ICDD).
28. Powder Diffraction File 38-1479, International Center for Diffraction Data (ICDD).
29. Powder Diffraction File 23-1271, International Center for Diffraction Data (ICDD).
30. Powder Diffraction File 10-0339, International Center for Diffraction Data (ICDD).
31. Powder Diffraction File 25-1200, International Center for Diffraction Data (ICDD).
32. Powder Diffraction File 33-0041, International Center for Diffraction Data (ICDD).
33. Powder Diffraction File 09-0310, International Center for Diffraction Data (ICDD).
34. Ge Wang: J. Phys. IV, 1993, vol. 3, pp. 873–79.
35. R. Ferro, G. Zanicchi, and R. Marazza: in Ternary Alloys, a Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow and G. Effenberg, eds., VCH Publishers, Weinheim, 1993, vol. 8, pp. 58–62.
36. H.E. Evans: Int. Mater. Rev., 1995, vol. 40, pp. 1–40.10.1179/imr.1995.40.1.1 ↗
37. A.W. Funkenbusch, J.G. Smeggil, and N.S. Bornstein: Metall. Trans. A, 1985, vol. 16A, pp. 1164–66.10.1007/BF02811687 ↗
38. J.G. Smeggil, A.W. Funkenbusch, and N.S. Bornstein: Metall. Trans. A, 1986, vol. 17A, pp. 923–32.10.1007/BF02661258 ↗
39. B. Pint: Oxid. Met., 1996, vol. 45, pp. 1–35.10.1007/BF01046818 ↗
40. I.J. Bennett, J.M. Kranenburg, and W.G. Sloof: J. Am. Ceram. Soc., 2005, vol. 88, pp. 2209–16.10.1111/j.1551-2916.2005.00408.x ↗