journal article·2005-06

Influence of shock prestraining on the formation of shear localization in 304 stainless steel

Q. Xue, G. T. Gray, B. L. Henrie, S. A. Maloy, S. R. Chen

Publisher page

Abstract

Adiabatic shear localization was studied in both annealed (as-received) and shock-prestrained 304 stainless steels (304 SS). A forced shear technique was used to probe the evolution of shear localization under high-strain-rate loading using a compression split-Hopkinson pressure bar (SHPB) and hatshaped specimens. The shearing responses of the shock-prestrained steel at high strain rate indicate that they exhibit a higher initial yield strength but a lower work-hardening rates than those observed in the annealed steel. The shock-prestrained specimens, having achieved an unstable condition at a smaller plastic displacement and a lower flow stress, were seen to exhibit distinct sharp-edged bands. Corresponding comparisons between the mechanical responses and the deformed microstructures demonstrate that loading-path dependency exerts a strong influence on shear-band formation. The shock-prestrained 304 SS displayed a higher incidence of deformation twins, slip bands, and dislocation debris prior to the shear tests, this substructure suppressed further dislocation storage (work hardening) and thereby facilitated the propensity for shear localization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics · Laser-Plasma Interactions and Diagnostics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. H.C. Rogers: Ann. Rev. Mater. Sci., 1979, vol. 9, pp. 283–311.10.1146/annurev.ms.09.080179.001435 ↗
2. Y. Bai and B. Dodd: Adiabatic Shear Localization, Pergamon Press, Oxford, United Kingdom, 1992, pp. 24–53.
3. T.W. Wright: The Physics and Mathematics of Adiabatic Shear Bands, Cambridge University Press, Cambridge, United Kingdom, 2002, pp. 1–32.
4. R.J. Clifton: NRC Report No. 356, U.S. National Material Advisory Board, Washington, DC, 1980.
5. Y. Bai: in Shock Waves and High-Strain-Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, NY, 1981, pp. 277–84.10.1007/978-1-4613-3219-0_17 ↗
6. M.R. Staker: Scripta Metall., 1980, vol. 14, pp. 677–80.10.1016/0036-9748(80)90022-8 ↗
7. A. Molinari and R.J. Clifton: Trans. ASME. E, J. Appl. Mech., 1987, vol. 54, pp. 806–12.10.1115/1.3173121 ↗
8. P.R. Arora and M.R. Raghavan: Trans. ASME. H, J. Eng. Mater. Technol., 1973, vol. 95, pp. 76–82.10.1115/1.3443135 ↗
9. J. Wasen, K. Hamberg, and B. Karlsson: Scripta Metall., 1984, vol. 18, pp. 621–24.10.1016/0036-9748(84)90353-3 ↗
10. N. Hai and Z. Wang: Mater. Sci. Eng. A, 2001, vol. A314, pp. 12–23.
11. J.A. Williams and T.C. Lindley: Z. Metallkd., 1969, vol. 60, pp. 957–60.
12. S. Kikuchi and B. Ilschner: Scripta Metall., 1986, vol. 20, pp. 159–62.10.1016/0036-9748(86)90117-1 ↗
13. Z. Yang and Z. Wang: Mater. Sci. Eng. A, 1996, vol. A210, pp. 83–93.10.1016/0921-5093(95)10074-1 ↗
14. A.S. Gulec and D.H. Baldwin: Metall. Trans., 1973, vol. 4, pp. 1315–21.10.1007/BF02644527 ↗
15. K. Kaneko: Bull. Jpn. Soc. Mech. Eng., 1983, vol. 26, pp. 1124–31.10.1299/jsme1958.26.1124 ↗
16. Y. Iino: JSME Int. J., Ser. I, 1992, vol. 35, pp. 303–09.
17. J.D. Parker and B. Wilshire: Mater. Sci. Eng., 1980, vol. 43, pp. 271–80.10.1016/0025-5416(80)90113-5 ↗
18. P.K. Liaw and J.D. Landes: Metall. Trans. A, 1986, vol. 17A, pp. 472–89.
19. D. Chae, J.P. Bandstra, and D.A. Koss: Mater. Sci. Eng. A, 2000, vol. A285, pp. 165–71.10.1016/S0921-5093(00)00642-0 ↗
20. W. Jin, M. Cao, R. Yang, and Z. Hu: J. Mater. Sci. Technol., 2001, vol. 17, pp. 318–20.
21. S. Mahajan: Phys. Status Solidi B, 1969, vol. 33, pp. 291–99.10.1002/pssb.19690330127 ↗
22. U. Andrade, M.A. Meyers, K.S. Vecchio, and A.H. Chokshi: Acta Metall. Mater., 1994, vol. 42, pp. 3183–95.10.1016/0956-7151(94)90417-0 ↗
23. P.S. Follansbee and G.T. Gray III: Mater. Sci. Eng. A, 1991, vol. A138, pp. 23–31.10.1016/0921-5093(91)90673-B ↗
24. D.H. Lassila and G.T. Gray III: J. Phys. IV (Coll.), 1991, vol. 1, pp. 19–26.
25. D.E. Albert and G.T. Gray III: Proc. Symp. High-Temperature Ordered Intermetallic Alloys VI, J. Horton, S. Hanada, I. Baker, R.D. Noebe, and D. Schwarz, eds., Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 725–30.
26. G.T. Gray and K.S. Vecchio: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2555–63.10.1007/BF02669413 ↗
27. G.T. Gray III: Proc. High-Pressure Materials Research, R.M. Wentzcovitch, R.J. Hemley, W.J. Nellis, and P.Y. Yu, eds., Materials Research Society, Pittsburgh, PA, 1998, vol. 499, pp. 87–98.
28. K.S. Vecchio and G.T. Gray III: J. Phys. IV (Coll.), 1994, vol. 4, pp. C8/231-C8/236.
29. G.T. Gray III: in High-Pressure Shock Compression of Solids, J.R. Asay and M. Shahinpoor, eds., Springer-Verlag, New York, NY, 1993, pp. 187–215.
30. S. Mahajan: Phys. Status Solidi A, 1970, vol. 2, pp. 187–202.10.1002/pssa.19700020202 ↗
31. L.E. Murr: in Shock Waves and High Strain Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, NY, 1981, pp. 607–73.10.1007/978-1-4613-3219-0_37 ↗
32. R. Hill and J.W. Hutchinson: J. Mech. Phys. Solids, 1975, vol. 23, p. 239.10.1016/0022-5096(75)90027-7 ↗
33. L. Anand and W.A. Spitzig: J. Mech. Phys. Solids, 1980, vol. 28, pp. 113–28.10.1016/0022-5096(80)90017-4 ↗
34. D. Peirce, R.J. Asaro, and A. Needleman: Acta Metall., 1982, vol. 30, pp. 1087–1119.10.1016/0001-6160(82)90005-0 ↗
35. E.F. Rauch and C. G’sell: Mater. Sci. Eng. A, 1989, vol. A111, pp. 71–80.10.1016/0921-5093(89)90199-8 ↗
36. T. Hoc, G.F. Dirras, and C. Rey: Mater. Sci. Eng. A, 2001, vols. A319-A321, pp. 304–07.10.1016/S0921-5093(01)01010-3 ↗
37. J.A. Hines and K.S. Vecchio: Acta Mater., 1997, vol. 45, pp. 635–49.10.1016/S1359-6454(96)00193-0 ↗
38. C. Mason and M.J. Worswick: Int. J. Fract., 2001, vol. 11, pp. 29–51.10.1023/A:1010903415661 ↗
39. K.H. Hartman, H.D. Kunze, and L.W. Meyer: in Shock Waves and High Strain Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, NY, 1981, pp. 325–37.10.1007/978-1-4613-3219-0_21 ↗
40. L.W. Meyer and S. Manwaring: in Metallurgical Applications of Shock Waves and High Strain Rate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds., Marcel Dekker, Inc., New York, NY, 1986, pp. 657–74.
41. M.A. Meyers, L.W. Meyer, J.H. Beatty, U. Andrade, K.S. Vecchio, and A.H. Chokshi: in Shock-wave and High-Strain-Rate Phenomena in Materials, M.A. Meyers, L.E. Murr, and K.P. Staudhammer, eds., Marcel Dekker, Inc., New York, NY, 1992, pp. 529–42.
42. M.A. Meyers, G. Subhash, B.K. Kad, and L. Prasad: Mech. Mater., 1994, vol. 17, pp. 175–93.10.1016/0167-6636(94)90058-2 ↗
43. K. Minnaar and M. Zhou: J. Mech. Phys. Solids, 1998, vol. 46, pp. 2155–70.10.1016/S0022-5096(98)00020-9 ↗
44. S. Nemat-Nasser, J.B. Isaacs, and J.E. Starrett: Proc. R. Soc. London, Ser. A (Mathem. Phys. Sci.), 1991, vol. 435, pp. 371–91.10.1098/rspa.1991.0150 ↗
45. S.A. Maloy, G.T. Gray III, C.M. Cady, R.W. Rutherford, and R.S. Hixson: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2617–24.10.1007/s11661-004-0207-4 ↗
46. Q. Xue, V. Nesterenko, and M.A. Meyers: in Shock-Wave and High-Strain-Rate Phenomena in Materials, K.P. Staudhammer, L.E. Murr, and M.A. Meyers, eds., Elsevier, Amsterdam, 2001, pp. 549–59.
47. Y.B. Xu, Y.L. Bai, Q. Xue, and L.T. Shen: Acta Mater., 1996, vol. 44, pp. 1917–26.10.1016/1359-6454(95)00306-1 ↗
48. M.A. Meyers, Y.B. Xu, Q. Xue, M.T. Pérez-Prado, and T.R. McNelley: Acta Mater., 2003, vol. 51, pp. 1307–25.10.1016/S1359-6454(02)00526-8 ↗
49. L.S. Costin and J. Duffy: Trans ASME, J. Eng. Mater. Technol., 1979, vol. 101, pp. 258–64.10.1115/1.3443686 ↗
50. K.A. Hartley, J. Duffy, and R.H. Hawley: J. Mech. Phys. Solids, 1987, vol. 35, pp. 283–301.10.1016/0022-5096(87)90009-3 ↗
51. V.F. Nesterenko, M.A. Meyers, J.C. LaSalvia, M.P. Bondar, Y.J. Chen, and Y.L. Lukyanov: Mater. Sci. Eng. A, 1997, vol. A229, pp. 23–41.10.1016/S0921-5093(96)10847-9 ↗