journal article·2007-04

Microstructural Analysis of Laser-Beam-Welded Directionally Solidified INCONEL 738

R.K. SIDHU, O.A. OJO, M.C. CHATURVEDI

Publisher page

Abstract

The laser welding of a directionally solidified INCONEL 738 superalloy (DS IN738) was investigated. Microstructural analysis of the fusion zone (FZ) and the heat-affected zone (HAZ) revealed that cracking occurred mainly in HAZ with only some cracks being extended into the FZ. However, the frequently observed centerline cracking in FZ of DS and single crystal (SX) alloys did not occur, which was attributed to the presence of negligible volume fraction of γ-γ′ eutectic in FZ. Constitutional liquation of secondary solidification constituents (MC carbides, M3B2 borides, M2SC sulphocarbides, and γ-γ′ eutectic) and γ′ precipitate particles was found to be the major cause of grain boundary liquation and the resultant intergranular microfissuring in the HAZ. The extent of HAZ microfissuring was, however, observed to be smaller in samples welded along the transverse direction (perpendicular to solidification direction) than when welding was done along the longitudinal direction (solidification direction). Nonetheless, more severe HAZ cracking occurred in samples of similarly welded conventionally cast (CC) alloy, and the present results indicate that the severity of HAZ liquation cracking in IN738 superalloy can be reduced by using a DS version of the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Quested P.N., Osgerby S. (1986) Mater Sci. Technol., 2, 461–7510.1179/mst.1986.2.5.461 ↗
2. Scarlin R.B. (1976) Metall. Trans. A, 7A, 1535–4110.1007/BF02656396 ↗
3. E.W. Ross and K.S. O’Hara: Proc. Superalloys Conf. 1992, S.D. Antolovich, R.W. Stusurd, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, D.L. Klarstrom, eds., Champion, Minerals, Metals & Materials Society (TMS), Warrendale, PA, 1992, pp. 257–65
4. D.N. Duhl: in Superalloys II, C.T. Sims, N.S. Stoloff, W.C. Hagel, eds., Wiley-Interscience, New York, NY, 1987, pp. 189–214
5. David S.A., Vitek J.M., Babu S.S., Boatner L.A., Reed R.W. (1997) Sci. Technol. Weld. Joining, 2(2), 79–8810.1179/stw.1997.2.2.79 ↗
6. W. Miglietti, J. Benson, F. Blum, P. Harms, and R. Pennefather: Proc. 1997 Int. Gas Turbine Aeroengine Congr. Expo., Orlando, FL, June 2–5, ASME, New York, NY, 1997, pp. 1–14
7. Ding R.G., Ojo O.A., Chaturvedi M.C. (2006) Scripta Mater., 54, 859–6410.1016/j.scriptamat.2005.11.010 ↗
8. Ojo O.A., Ding R.G., Chaturvedi M.C. (2006) Scripta Mater., 54, 2131–3610.1016/j.scriptamat.2006.02.044 ↗
9. Jahnke B. (1982) Weld. J., 61(11), 343s–347s
10. Su C.Y., Chou C.P., Wu B.C., Lih W.C. (1997) J. Mater. Eng. Perform., 6(5), 619–2710.1007/s11665-997-0055-7 ↗
11. Banerjee K., Richards N.L., Chaturvedi M.C. (2005) Metall. Mater. Trans. A, 36A(7), 1881–9010.1007/s11661-005-0051-1 ↗
12. Sidhu R.K., Richards N.L., Chaturvedi M.C. (2005) Mater. Sci. Technol., 21, 1119–3110.1179/174328405X62279 ↗
13. Zhu H.Q., Hu Z.Q., Zhu Y.X., Guo S.R., Guan H.R., Shi C.X., Morinaga M., Murata Y. (1995) Metall. Mater. Trans. B, 26B, 831–3710.1007/BF02651730 ↗
14. Rosenthal R., West D.R.F. (1999) Mater Sci. Technol., 15, 1387–9410.1179/026708399101505518 ↗
15. Rosenthal R., West D.R.F. (1986) Mater Sci. Technol., 2, 169–7410.1179/mst.1986.2.2.169 ↗
16. A.D. Williams and J.L. Humphries: Proc. 15th Int. Thermal Spray Conf. 1998, May 25–29, ASM International, Nice, France, 1998, vol. 2, pp. 1431–3510.31399/asm.cp.itsc1998p1431 ↗
17. Kim D.Y., Hwang J.H., Kim K.S., Youn J.G. (2000) J. Eng. Gas Turbines Power, 122, 457–6110.1115/1.1287509 ↗
18. Mattheij S., Hendriks M. (2004) Diesel Gas Turbine Worldwide, 36(4), 32–34
19. Hirose A., Nakamura D., Yanagawa H., Kobayashi K.F. (2003) Mater. Sci. Forum, 426–432, 4007–1210.4028/www.scientific.net/MSF.426-432.4007 ↗
20. Ojo O.A., Richards N.L., Chaturvedi M.C. (2004) Mater. Sci. Technol., 20, 1027–3410.1179/026708304225019948 ↗
21. Hoffelner W., Kny E., Stickler R., McCall W.J. (1979) Z. Werkstofftech., 10, 84–9210.1002/mawe.19790100307 ↗
22. Quested P.N., McLean M. (1980) Conf. on Solidification Technology in the Foundry and Cast House. The Metals Society, London, pp. 1387–94
23. Gilath I., Signamarcheix J.M., Bensussan P. (1994) J. Mater. Sci., 29, 3358–6210.1007/BF00356685 ↗
24. Ojo O.A., Richards N.L., Chaturvedi M.C. (2004) Scripta Mater., 51, 683–8810.1016/j.scriptamat.2004.06.013 ↗
25. Taha M., Kurz W. (1981) Z. Metallkd., 72, 546–49
26. Flemmings M.C. (1974) Solidification Processing. McGraw-Hill, New York, NY
27. Y.L. Wang, X. Yu, N.L. Richards, and M.C. Chaturvedi: Proc. Superalloys Conf. 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.H. Scihrra, and S. Walston, eds., TMS, Champion, PA, 2004, pp. 529–3510.7449/2004/Superalloys_2004_529_535 ↗
28. Dupont J.N., Robino C.V. (1999) Scripta Mater., 41, 449–45410.1016/S1359-6462(99)00102-5 ↗
29. Ojo O.A., Richards N.L., Chaturvedi M.C. (2006) Metall. Mater. Trans. A, 37A, 421–3310.1007/s11661-006-0013-2 ↗
30. Backerud L., Carlsson B., Oskarsson R., Mikus M. (1976) Scand. J. Metall., 3, 225–35
31. Radhakrishnan B., Thompson R.G. (1991) Metall. Trans. A, 22A, 887–90210.1007/BF02658999 ↗
32. F. Zupanic, T. Boncina, and A. Krizman: Proc. Superalloys Conf. 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S.L. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 239–4610.7449/2000/Superalloys_2000_239_246 ↗
33. Gobbi S., Li Zhang, Norris J., Richter K.H., Loreau J.H. (1996) J. Mater. Process. Technol., 56, 333–4510.1016/0924-0136(95)01847-6 ↗
34. Thmpson R.G., Mayo D.E., Radhakrishnan B. (1991) Metall. Trans. A, 22A, 557–6210.1007/BF02656823 ↗
35. Owczarski W.A., Duvall D.S. (1967) Weld. J. 46, 423s–432s
36. Nakkalil R., Richards N.L., Chaturvedi M.C. (1993) Metall. Trans. A, 24A, 1169–7910.1007/BF02657248 ↗
37. Ojo O.A., Richards N.L., Chaturvedi M.C. (2004) Scripta Mater., 50, 641–4610.1016/j.scriptamat.2003.11.025 ↗
38. Pepe J.J., Savage W.F. (1967) Welding J., 46, 411s–423s
39. Zhang J.S., Hu Z.Q., Murata Y., Morinaga M., Yukawa N. (1991) Metall. Trans. A, 22A, 2443–50
40. Owczarski W.A., Duvall D.S., Sullivan C.P. (1966) Weld. J., 45, 145s–155s
41. Borland J.C. (1960) Br. Weld. J., 7(8), 508–12
42. Smith C.S. (1948) Trans. AIME, 175, 15–21
43. Grimmer H., Bollmann W., Warrington D.H. (1974) Acta. Cryst., 30, 197–20010.1107/S056773947400043X ↗
44. Guo H., Chaturvedi M.C., Richards N.L., McMahon G.S. (1999) Scripta Mater., 40, 383–8810.1016/S1359-6462(98)00427-8 ↗
45. Kokawa H., Lee C.H., North T.H. (1991) Metall. Trans. A, 22A, 1627–3410.1007/BF02667375 ↗
46. Rappaz M., Jacot A., Boettinger W.J. (2003) Metall. Mater. Trans. B, 34B, 467–7410.1007/s11661-003-0083-3 ↗
47. Wang N., Mokadem S., Rappaz M., Kurz W. (2004) Acta Mater. 52(11), 3173–8210.1016/j.actamat.2004.03.047 ↗
48. T.W. Clyne, and G.J. Davies: TMA Proc. Int. Conf. Solidification, TMA, Sheffield, United Kingdom, 1979, pp. 275–78.
49. Y. Arata, F. Matsuda, and S. Katayama: Trans. JWRI, 1977, pp. 623– 27.10.1016/S0042-207X(77)80462-4 ↗