journal article·2011-12

Quenched and Partitioned Microstructures Produced via Gleeble Simulations of Hot-Strip Mill Cooling Practices

G. A. Thomas, J. G. Speer, D. K. Matlock

Publisher page

Abstract

Previous researchers reported on quenched and partitioned (Q&P) microstructures produced via carbon partitioning from martensite into austenite during isothermal annealing after quenching to develop a partially martensitic initial structure. However, the thermal profile used in previous studies is not well suited to creating Q&P microstructures directly from a hot-strip mill. In this work, the commonly employed Q&P thermal profile (i.e., having an isothermal partitioning step) was modified to evaluate nonisothermal partitioning that might instead occur during cooling of a wound coil. Thus, it was possible to assess the potential for creating Q&P microstructures and properties directly off of the hot mill. Gleeble thermal simulations representative of a hot-strip mill cooling practice were used to create dual-phase, Q&P, transformation-induced plasticity (TRIP), and conventional microstructures by varying the quench/coiling temperatures (CTs) using a 0.19C-1.59Mn-1.63Si (wt pct) steel. Microstructural and mechanical property data indicate that hot rolling might be a viable processing route for high-strength Q&P steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
2. J.G. Speer, A.M. Streicher, D.K. Matlock, F. Rizzo, and G. Krauss: Austenite Formation and Decomposition, TMS, Warrendale, PA, 2003, pp. 505–22.
3. A. Clarke: Ph.D. Thesis, Colorado School of Mines, Golden, CO, 2006.
4. A.M. Streicher, J.G. Speer, D.K. Matlock, and B.C. De Cooman: Proc. Int. Conf. on Advanced High Strength Sheet Steels for Automotive Applications, Association for Iron and Steel Technology, Warrendale, PA, 2004, pp. 51–62.
5. E. De Moor, J.G. Speer, D.K. Matlock, C. Fojer, and J. Penning: MS&T 2009, MS&T Partner Societies, Quincy, FL, 2009, pp. 1554–63.
6. E. De Moor: Ph.D. Thesis, Universiteit Gent, Gent, Belgium, 2009.
7. G.A. Thomas, J.G. Speer, and D.K. Matlock: AIST Trans., vol. 5 (5), pp. 209–17.
8. I.I. Kovenski: Phys. Met. Metallogr., 1963, vol. 16, pp. 107–08.
9. C.A. Wert: Phys. Rev., 1950, pp. 601–05.10.1103/PhysRev.79.601 ↗
10. C.S. Roberts, B.L. Averbach, and M. Cohen: Trans. ASME, 1953, vol. 45, pp. 576–604.
11. J. Mahieu, B. De Cooman, and J. Maki: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–80.10.1007/s11661-002-0378-9 ↗
12. M.F. Gallagher: Master’s Thesis, Colorado School of Mines, Golden, CO, 2003.
13. B. Nelson: ArcelorMittal Dofasco, private communication, Hamilton, Ontario, Canada, 2007.
14. G. Thomas: Master’s Thesis, Colorado School of Mines, Golden, CO, 2009.
15. C.F. Jatczak, J.A. Larson, and S.W. Shin: Manual SP-452, SAE, Warrendale, PA, 1979.
16. B.D. Cullity: Elements of X-Ray Diffraction, Prentice Hall, Upper Saddle River, NJ, 1978.
17. M.H. Saleh and R. Priestner: J. Mater. Process. Technol., 2001, vol. 113 pp. 587–93.10.1016/S0924-0136(01)00638-0 ↗
18. O. Yakubovsky, N. Fonstein, and D. Bhattacharya: Proc. Int. Conf. on Advanced High-Strength Sheet Steels for Automotive Applications, Association for Iron and Steel Technology, Warrendale, PA, 2004, pp. 295–306.