journal article·2002-03

Creep strength of magnesium-based alloys

Kouichi Maruyama, Mayumi Suzuki, Hiroyuki Sato

Publisher page

Abstract

The high-temperature creep resistance of magnesium alloys was discussed, with special reference to Mg-Al and Mg-Y alloys. Mg-Al solid-solution alloys are superior to Al-Mg solid-solution alloys in terms of creep resistance. This is attributed to the high internal stress typical of an hcp structure having only two independent basal slip systems. Although magnesium has a smaller shear modulus than aluminum, the inherent creep resistance of Mg alloys is better than that of Al alloys. The creep resistance of Mg alloys is improved substantially by the addition of Y. Solid-solution hardening is the principal mechanism of the strengthening, but the details of the mechanism have not been elucidated yet. Forest dislocation hardening in concentrated alloys and dynamic precipitation in a Mg-2.4 pct Y alloy also contribute to the strengthening. An addition of a very small amount of Zn raises the dislocation density and significantly improves the creep resistance of Mg-Y alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Applications · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. T. Ito and H. Shirai: J. Jpn. Inst. Light Met., 1992, vol. 42, pp. 707–19.10.2464/jilm.42.707 ↗
2. W. Henning and B.L. Mordike: in Strength of Metals and Alloys, H.J. McQueen, J.-P. Bailon, J.I. Dickson, J.J. Jonas, and M.G. Akben, eds., Pergamon Press, Oxford, United Kingdom, 1985, pp. 803–08.10.1016/B978-0-08-031642-0.50140-9 ↗
3. H. Karimzadeh, J.M. Worrall, R. Pilkington, and G.W. Lorimer: Magnesium Technology, The Institute of Metals, London, 1986, pp. 138–41.
4. J.F. King, G.A. Fowler, and P. Lyon: in Light Weight Alloys for Aerospace Applications II, E.W. Lee and N.J. Kim, eds., TMS, Warrendale, PA, 1991, pp. 423–38.
5. M. Ahmed, G.W. Lorimer, R. Pilkington, and P. Lyon: in Magnesium Alloys and Their Applications, B.L. Mordike and F. Hehmann, eds., DGM Information, Oberursal, FRG, 1992, pp. 251–57.
6. M. Suzuki, H. Sato, K. Maruyama, and H. Oikawa: Mater. Sci. Eng. A, 1998, vol. 252, pp. 248–55.10.1016/S0921-5093(98)00662-5 ↗
7. H. Sato, M. Suzuki, K. Maruyama, and H. Oikawa: Key Eng. Mater., 2000, vol. 171–4, pp. 109–14.
8. H.W. King: J. Mater. Sci., 1966, vol. 1, pp. 79–90.10.1007/BF00549722 ↗
9. H. Sato and H. Oikawa: in Strength of Metals and Alloys, D.G. Brandon, R. Chaim, and A. Rosen, eds., Freund Publishing House, London, United Kingdom, 1991, pp. 463–70.
10. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: Trans. ASM, 1969, vol. 62, pp. 155–79.
11. S.S. Vagarali and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 1157–70.10.1016/0001-6160(82)90009-8 ↗
12. H. Oikawa: in Hot Deformation of Aluminum Alloys, T.G. Langdon, H.D. Merchant, J.G. Morris, and M.A. Zaidi, eds., TMS, Warrendale, PA, 1991, pp. 153–80.
13. H. Sato, K. Maruyama, and Hiroshi Oikawa: in Aluminum Alloys, Their Physical and Mechanical Properties, T. Sato, S. Kumai, T. Kobayashi, and Y. Murakami, eds., The Japan Institute of Light Metals, Tokyo, 1998, pp. 1355–60.
14. H. Oikawa, H. Sato, and K. Maruyama: Mater. Sci. Eng. A, 1985, vol. 75, pp. 21–28.10.1016/0025-5416(85)90174-0 ↗
15. H. Oikawa, N. Matsuno, and S. Karashima: Met. Sci., 1975, vol. 9, pp. 209–12.10.1179/030634575790445251 ↗
16. A.H. Cottrell: in Dislocations and Plastic Flow in Crystals, Oxford University Press, Oxford, United Kingdom, 1953, pp. 136–39.
17. W. Blum, B. Watzinger and P. Weidinger: in Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informationsgesselschaft mbH, Frankfurt, Germany, 1998, pp. 49–60.
18. B. Watzinger, P. Weidinger, F. Breutinger, W. Blum, R. Rösch, H. Lipowsky, and H.-G. Haldenwanger, in: Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informationsgessellschaft mbH, Frankfurt, Germany, 1998, pp. 259–64.
19. M. Suzuki, H. Sato, and H. Oikawa: in Strength of Materials, H. Oikawa, K. Maruyama, S. Takeuchi, and M. Yamaguchi, eds., The Japan Institute of Metals, Sendai, 1994, pp. 555–59.
20. G.W. Lorimer: Magnesium Technology, The Institute of Metals, London, 1986, pp. 47–53.
21. T. Sato: Materia Jpn. (MTERE 2), 1999, vol. 38, pp. 294–97.10.2320/materia.38.294 ↗
22. R. Ninomiya, S. Kamado, M. Morinaga, and Y. Kojima, Materia Jpn. (MTERE2), 1999, vol. 38, pp. 305–09.10.2320/materia.38.305 ↗
23. H. Yoshinaga and R. Horiuchi: Trans. JIM, 1964, vol. 5, pp. 14–21.10.2320/matertrans1960.5.14 ↗
24. B.M. Loginov and A.A. Predcoditelev: Phys. Status Solidi (a), 1982, vol. 72, pp. 69–77.10.1002/pssa.2210720104 ↗
25. T.B. Massalski, H. Okamoto, P.R. Subranamian, and L. Kacprzak: Binary Alloy Phase Diagrams, 2nd ed. ASM INTERNATIONAL, Metals Park, OH, 1990, pp. 2566–69.
26. T.J. Pike and B. Noble, J. Less-Common Met., 1973, vol. 30, pp. 63–74.10.1016/0022-5088(73)90007-6 ↗