journal article·2011-09

Development of Dendritic Structure in the Liquid-Metal-Cooled, Directional-Solidification Process

C. L. Brundidge, J. D. Miller, T. M. Pollock

Publisher page

Abstract

A single-crystal nickel-base superalloy was directionally solidified over a range of withdrawal rates to assess the benefits of using liquid-metal cooling (LMC) for small-scale castings. Cylindrical bars of 1.6-cm diameter were solidified at a rate of 3.4 mm/min using conventional (Bridgman) radiation cooling and at rates of 8.5, 12.7, and 21.2 mm/min using LMC. PROCAST modeling was used to predict dendrite arm spacings based on local thermal conditions. The LMC process exhibited higher thermal gradients and finer primary and secondary spacings of up to 50 and 70 pct, respectively, in comparison to the Bridgman process. The maximum refinement in dendritic spacings using the LMC process occurred at a withdrawal rate of 12.7 mm/min. Variability in axial and lateral dendrite spacings decreased with increasing withdrawal rate, up to the point of maximum refinement. Withdrawal rates exceeding 12.7 mm/min increased the variability in spacings and produced lateral overgrowth of the primary dendrites by secondaries and promoted formation of high-angle grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. F. Hugo, U. Betz, and J. Ren: Int. Symp. on Liquid Metal Processing and Casting, A. Mitchell, L. Ridgway, and M. Baldwin, eds., AVS, New York, NY, 1999, pp. 16–30.
2. J. Grossman, J. Preuhs, W. Esser, and R.F. Singer: Int. Symp. on Liquid Metal Processing and Casting, A. Mitchell, L. Ridgway, and M. Baldwin, eds., AVS, New York, NY, 1999, pp. 31–40.
3. A.J. Elliott, S. Tin, W.T. King, S.-C. Huang, M.F.X. Gigliotti, and T.M. Pollock: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3221–31.10.1007/s11661-004-0066-z ↗
4. J.D. Miller and T.M. Pollock: Int. Symp. on Liquid Metal Processing and Casting, P.D. Lee, A. Mitchell, and R. Williamson, eds., TMS, Warrendale, PA, 2009, pp. 119–26.
5. A.J. Elliott and T.M. Pollock: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 871–82.10.1007/s11661-006-9085-2 ↗
6. F. Hugo, U. Betz, and H. Mayer: U.S. Patent No. 6,308,767, 2001.
7. G. K Bouse and J. R. Mihalisin: in Superalloys, Supercomposites and Superceramics, J.K. Tien and T. Caulfield, eds., Academic Press, New York, NY, 1989, pp. 99–148.10.1016/B978-0-12-690845-9.50010-5 ↗
8. J.D. Hunt: in Solidification and Casting of Metals, J.D. Hunt, ed., The Metals Society, London, 1979, pp. 3–9.
9. W. Kurz and D.J. Fisher: Acta Metall., 1981 vol. 29, pp. 11–20.10.1016/0001-6160(81)90082-1 ↗
10. C.L. Brundidge, D. Van Drasek, B. Wang, and T.M. Pollock: Int. Symp. on Liquid Metal Processing and Casting, P.D. Lee, A. Mitchell, and R. Williamson, eds., TMS, Warrendale, PA, 2009, pp. 107–17.
11. N. D’Souza, M.C. Ardakani, M. McLean, and B.A. Shollock: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2877–86.10.1007/BF02830351 ↗
12. R.M. Ward, S.M. Johnson, and M.H. Jacobs: Int. Symp. on Liquid Metal Processing and Casting, A. Mitchell and P. Auburtin, eds., AVS, New York, NY, 1997, pp. 978–1109.
13. L. Li and R.A. Overfelt: J. Mater. Sci., 2002, vol. 37, pp. 3521–32.10.1023/A:1016527509815 ↗
14. K.A. Jackson, J.D. Hunt, D.R. Uhlmann, and T.P. Seward III: Trans. TMS-AIME, 1966, vol. 236, pp. 149–58.
15. T.S. Piwonka: Metals Handbook, vol. 15, Casting, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 319–23
16. D.G. McCartney and J.D. Hunt: Acta Metall., 1981, vol. 29, pp. 1851–63.10.1016/0001-6160(81)90111-5 ↗