journal article·2011-08

Effects of Process Parameters upon the Shape Memory and Pseudo-Elastic Behaviors of Laser-Welded NiTi Thin Foil

C. W. Chan, H. C. Man, T. M. Yue

Publisher page

Abstract

This article discusses the effects of laser welding parameters such as power, welding speed, and focus position on the weld bead profile, microstructure, pseudo-elasticity (PE), and shape memory effect (SME) of NiTi foil with thickness of 250 μm using 100W CW fiber laser. The parameter settings to produce the NiTi welds for analysis in this article were chosen from a fractional factorial design to ensure the welds produced were free of any apparent defect. The welds obtained were mainly of cellular dendrites with grain sizes ranging from 2.5 to 4.8 μm at the weld centerline. A small amount of Ni3Ti was found in the welds. The onset of transformation temperatures (A s and M s ) of the NiTi welds shifted to the negative side as compared to the as-received NiTi alloy. Ultimate tensile stress of the NiTi welds was comparable to the as-received NiTi alloy, but a little reduction in the pseudo-elastic property was noted. Full penetration welds with desirable weld bead profiles and mechanical properties were successfully obtained in this study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. G.R. Purdy and J.G. Parr: Trans. AIME, 1981, vol. 2, pp. 23–25.
2. T. Duerig, A. Pelton, and D. Stockel: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 149–60.10.1016/S0921-5093(99)00294-4 ↗
3. T. Duerig, D. Stockel, and D. Johnson: Proc. SPIE 4763, 2003, pp. 7–15.10.1117/12.508666 ↗
4. N.B. Morgan: Mater. Sci. Eng. A, 2004, vol. 378, pp. 16–23.10.1016/j.msea.2003.10.326 ↗
5. R.G. Dennis, D.E. Dow, and J.A. Faulkner: Med. Eng. Phys., 2003, vol. 25, pp. 239–53.10.1016/S1350-4533(02)00193-5 ↗
6. H. Lanmuller, Z. Ashley, E. Unger, H. Sutherland, M. Reichel, M. Russold, J. Jarvis, W. Mayr, and S. Salmons: Med. Bio. Eng. Comp., 2005, vol. 43, pp. 535–40.10.1007/BF02344737 ↗
7. P.H. Peckham and J.S. Knutson: Annu. Rev. Biomed. Eng., 2005, vol. 7, pp. 327–60.10.1146/annurev.bioeng.6.040803.140103 ↗
8. P.W. Fuerschbach and D.A. Hinkley: Weld. J., 1997, vol. 76, pp. 103–09.
9. Anon: Adv. Mater. Process., 2006, vol. 164, p. 74.10.3797/scipharm.oephg.19.PP ↗
10. T. Yoneyama, H. Doi, E. Kobayashi, and H. Hamanaka: J. Mater. Sci.: Mater. Med., 2002, vol. 13, pp. 947–51.10.1023/A:1019804512137 ↗
11. P. Sevilla, F. Martorell, C. Libenson, J.A. Planell, and F.J. Gil: J. Mater. Sci.: Mater. Med., 2008, vol. 19, pp. 525–29.10.1007/s10856-007-0164-8 ↗
12. P. Schloßmacher, T. Hass, and A. Schüßler: Proc. SMST, Pacific Grove, CA, 1994, pp. 137–42.
13. A. Tuissi, S. Besseghini, T. Ranucci, F. Squatrito, and M. Pozzi: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 813–17.10.1016/S0921-5093(99)00422-0 ↗
14. K. Uenishi, M. Takatugu, M. Seki, T. Kunimasa, K.F. Kobayashi, T. Ikeda, and A. Tuboi: Mater. Trans., 2002, vol. 43, pp. 57–62.
15. A. Falvo, F.M. Furgiuele, and C. Maletta: Mater. Sci. Eng. A, 2005, vol. 412, pp. 235–40.10.1016/j.msea.2005.08.209 ↗
16. X.J. Yan, D.Z. Yang, and M. Qi: Mater. Charact., 2006, vol. 57, pp. 58–63.10.1016/j.matchar.2005.12.009 ↗
17. Y.G. Song, W.S. Li, L. Li, and Y.F. Zheng: Mater. Lett., 2008, vol. 62, pp. 2325–28.10.1016/j.matlet.2007.11.082 ↗
18. H. Gugel, A. Schuermann, and W. Theisen: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 668–71.10.1016/j.msea.2006.11.179 ↗
19. C. Dawes: Laser Welding, McGraw-Hill, New York, NY, 1992, pp. 1–15.10.1533/9781845698843 ↗
20. S. Kou: Welding Metallurgy, John Wiley & Sons, Hoboken, NJ, 2002, pp. 206–09.10.1002/0471434027 ↗
21. K. Otsuka and C.M. Wayman: Shape Memory Materials, Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 50–62.
22. W. Tang, B. Sundman, R. Sandstrom, and C. Qiu: Acta Mater., 1999, vol. 47, pp. 3457–68.10.1016/S1359-6454(99)00193-7 ↗
23. E. Hornbogen, V. Mertinger, and D. Wurzel: Scripta Mater., 2001, vol. 44, pp. 171–78.10.1016/S1359-6462(00)00543-1 ↗
24. J. Khalil Allafi, X. Ren, and G. Eggeler: Acta Mater., 2002, vol. 50, pp. 793–803.10.1016/S1359-6454(01)00385-8 ↗
25. T. Sawaguchi, G. Kaustrater, A. Yawny, M. Wagner, and G. Eggeler: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2847–59.10.1007/s11661-003-0186-x ↗
26. K.W.K. Yeung, K.M.C. Cheung, W.W. Liu, and C.Y. Chung: Mater. Sci. Eng. A, 2004, vol. 383, pp. 213–18.10.1016/j.msea.2004.05.063 ↗
27. J. Frenzel, E.P. George, A. Dlouhy, C. Somsen, M. Wagner, and G. Eggeler: Acta Mater., 2010, vol. 58, pp. 3444–58.10.1016/j.actamat.2010.02.019 ↗
28. Y. Ogata, M. Takatugu, T. Kunimasa, K. Uenishi, and K.F. Kobayashi: Mater. Trans., 2004, vol. 45 (4), pp. 1070–76.10.2320/matertrans.45.1070 ↗
29. D.L. Shi: Introduction to Biomaterials, World Scientific Publishing, Singapore, 2006, pp. 117–36.