journal article·2014-04

Tribological Behavior of A356/Al2O3 Surface Nanocomposite Prepared by Friction Stir Processing

Y. Mazaheri, F. Karimzadeh, M. H. Enayati

Publisher page

Abstract

Surface A356 aluminum alloy matrix composites containing micro and nanosized Al2O3 are prepared by a new approach utilizing high-velocity oxy-fuel spraying and friction stir processing (FSP). Optical and scanning electron microscopy, microhardness, and wear tests were used to characterize the surface composites. Results indicated that, the presence of Al2O3 in matrix can improve the mechanical properties of specimens. The microhardness of surface composites containing micro and nanosized Al2O3 were 89.8 ± 2.6 HV and 109.7 ± 2.5 HV, respectively, which were higher than those for the as-received (79.6 ± 1.1 HV) and the FSPed A356-T6 with no alumina powder (66.8 ± 0.9 HV). Surface composites revealed low friction coefficients and wear rates, which were significantly lower than those obtained for substrate. The wear mass losses of the as-received, the FSPed, and surface micro and nanocomposite specimens after 500-m sliding distance were 50.5, 55.6, 31, and 17.2 mg, respectively. Scanning electron microscopy tests revealed different wear mechanisms on the surface of the wear test specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. D.L. Zalensas: Aluminum Casting Technology, 2nd ed., AFS Inc., Schaumburg, IL, 1993, p. 77.
2. M. Kok and K. Ozdin: J. Mater. Process. Technol., 2007, vol. 183, pp. 301-09.10.1016/j.jmatprotec.2006.10.021 ↗
3. T.G. Durai, K. Das, and S. Das: Mater. Sci. Eng. A, 2007, vol. 445, pp. 100–05.10.1016/j.msea.2006.09.018 ↗
4. H. Mindivan, E.S. Kayali and H. Cimenoglu: Wear, 2008, vol. 265, pp. 645-54.10.1016/j.wear.2007.12.007 ↗
5. M.A. Dellis, J.P. Keastenrmans and F. Delannay: Mater. Sci. Eng. A, 1991, vol. 135A, pp. 253-57.10.1016/0921-5093(91)90572-5 ↗
6. P.K. Rohatgi: J. Met., 1991, vol. 43, pp. 10-15.
7. J. Dinwoodie: Automotive Applications for MMCs Based on Short Staple Alumina Fibers, SAE Technical Paper Series, Int. Con. Exp., Detroit, MI, 1987, pp. 23–27.10.4271/870437 ↗
8. M.J. Kocazac, S.C. Khatri, J.E. Allison, and M.G. Bader: in MMCs for Ground Vehicle Aerospace and Industrial Applications, Suresh et al., Fundamentals of Metal Matrix Composites, Butterworths, Guildford, 1993, p. 297.10.1016/B978-0-08-052371-2.50020-1 ↗
9. F.M. Hosking, F. Folgar Portillo, R. Wonderlin and R. Mehrabian: J. Mater. Sci., 1982, vol. 17, pp. 477-98.10.1007/BF00591483 ↗
10. H.J. Liu, H. Fujii and K. Nogi: Mater. Sci. Technol., 2004, vol. 20, pp. 399-402.10.1179/026708304225012279 ↗
11. K. Ohishi and T.R. McNelley: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2951-61.10.1007/s11661-004-0242-1 ↗
12. J.Q. Su, T.W. Nelson and C.J. Sterling: Scripta Mater., 2005, vol. 52, pp. 135-40.10.1016/j.scriptamat.2004.09.014 ↗
13. D.C. Hofmann and K.S. Vecchio: Mater. Sci. Eng. A, 2005, vol. 402A, pp. 234-41.10.1016/j.msea.2005.04.032 ↗
14. Z.Y. Ma: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 642-58.10.1007/s11661-007-9459-0 ↗
15. R.S. Mishra, Z.Y. Ma and I. Charit: Mater. Sci. Eng. A, 2003, vol. 341A, pp. 307-10.10.1016/S0921-5093(02)00199-5 ↗
16. Y. Morisada, H. Fujii, T. Nagaoka and M. Fukusumi: Mater. Sci. Eng. A, 2006, vol. 419A, pp. 344-48.10.1016/j.msea.2006.01.016 ↗
17. Y. Morisada, H. Fujii, T. Nagaoka and M. Fukusumi: Mater. Sci. Eng. A, 2006, vol. 433A, pp. 50-54.10.1016/j.msea.2006.06.089 ↗
18. M. Dixit, J.W. Newkirk and R.S. Mishra: Scripta Mater., 2007, vol. 56, pp. 541-44.10.1016/j.scriptamat.2006.11.006 ↗
19. B. Zahmatkesh and M.H. Enayati: Mater. Sci. Eng. A, 2010, vol. 527A, pp. 6734-40.10.1016/j.msea.2010.07.024 ↗
20. S.R. Anvari, F. Karimzadeh and M.H. Enayati: Wear, 2013, vol. 304, pp. 144-51.10.1016/j.wear.2013.03.014 ↗
21. C.M. Chen and R. Kovacevic: J. Mach. Tools Manufact., 2003, vol. 43, pp. 1319-26.10.1016/S0890-6955(03)00158-5 ↗
22. Z.Y. Ma, S.R. Sharma, R.S. Mishra and M.W. Mahoney: Mater. Sci. Forum., 2003, vols. 426-432, pp. 2891-96.10.4028/www.scientific.net/MSF.426-432.2891 ↗
23. Z.Y. Ma, S.R. Sharma and R.S. Mishra: Metall. Mater. Trans. A, 2007, vol. 37A, pp. 3323-36.
24. Z.Y. Ma, A.L. Pilchak, M.C. Juhas and J.C. Williams: Scripta Mater., 2008, vol. 58, pp. 361-66.10.1016/j.scriptamat.2007.09.062 ↗
25. S.C. Tjong: Adv. Eng. Mater., 2007, vol. 8, pp. 639-52.10.1002/adem.200700106 ↗
26. D.J. Lloyd: Int. Mater. Rev., 1994, vol. 39, pp. 1-24.10.1179/imr.1994.39.1.1 ↗
27. K.H. Zum Gahr: Tribol. Ser., 1987, vol. 10, pp. 174-76.
28. N. Hosseini, F. Karimzadeh, M.H. Abbasi and M.H. Enayati: Mater. Des., 2010, vol. 31, pp. 4777-4785.10.1016/j.matdes.2010.05.001 ↗
29. B. Prabhu, C. Suryanarayana, L. Ana and R. Vaidyanathan: Mater. Sci. Eng. A, 2006, vol. 425A, pp. 192-200.10.1016/j.msea.2006.03.066 ↗
30. T.G. Durai, K. Das and S. Das: Mater. Sci. Eng. A, 2007, vol. 471A, pp. 88-94.10.1016/j.msea.2007.05.060 ↗
31. Y.C. Chen and K. Nakata: Mater. Charact., 2009, vol. 60, pp. 1471-75.10.1016/j.matchar.2009.07.004 ↗