Influence of TiN Inclusions on the Cleavage Fracture Behavior of Low-Carbon Microalloyed Steels
Source abstract
Abstract
Toughness is a major concern for low-carbon microalloyed steels. In this work, the impact fracture behavior of two low-carbon Ti-V microalloyed steels was investigated in order to better understand the role of TiN inclusions in the toughness of the steels. The steels had similar chemical compositions and were manufactured by the same rolling process. However, there was an obvious difference in the ductile brittle transition temperature (DBTT) in the Charpy V-notch (CVN) impact tests of the two steels; one (steel 1) possessing a DBTT below −20 °C, while the DBTT of the other (steel 2) was above 15 °C. Scanning electron microscopy (SEM) fractography revealed that there were TiN inclusions at the cleavage fracture initiation sites on the fracture surfaces of steel 2 at both low and room temperatures. It is shown that the TiN inclusions had nucleated on Al2O3 particles and that they had pre-existing interior flaws. A high density of TiN inclusions was found in steel 2, but there was a much lower density in steel 1. Analysis indicates that these inclusions were responsible for the shift of DBTT to a higher temperature in steel 2. A mechanism is proposed for understanding the effect of the size and density of TiN inclusions on the fracture behavior, and the cleavage fracture initiation process is analyzed in terms of the distribution and development of stresses ahead of the notch tip during fracture at both low and room temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. T. Tanaka: Int. Mater. Rev., 1981, 264:18510.1179/imr.1981.26.1.185 ↗
2. M.C. Zhao, Y.Y. Shan, J.B. Qu, K. Yang et al. Acta Metall., 2001, 37:179
3. M. Civallero, C. Parrini: Pipeline Gas J., 1974, 201:35
4. G. Tither: Molybd. Mos., 1976, 1:2
5. D.L. Shu: Metallic Mechanical Property, 2nd ed., Mechanical Industry Press, Beijing, 1997, pp. 57, 77–79, and 106–08
6. S. Lee, D. Kwon, Y.K. Lee, O. Kwon: Metall. Mater. Trans. A, 1995, 26A:109310.1007/BF02670605 ↗
7. H.L. Gao, X.X. Xin: Weld. Pipe, 1995, 18:7
8. M. Prikryl, A. Kroupa, G.C. Weatherly, S.V. Subramanian: Metall. Mater. Trans. A, 1996, 27A:1147–65
9. Z. Chen, M.H. Loretto, R.C. Cochrane: Mater. Sci. Technol., 1987, 3:836–4410.1179/mst.1987.3.10.836 ↗
10. P.L. Harrison, P.H. Bateson: Proc. Conf. on Titanium Technology in Microalloyed Steels, T.N. Baker, ed., The Institute of Materials, London, 1997, pp.180–96
11. A. Echeverría, J.M. Rodriguez-Ibabe: Scripta Mater., 1999, 41:131–1610.1016/S1359-6462(99)00124-4 ↗
12. L.P. Zhang, C.L. Davis, M. Strangwood: Metall. Mater. Trans. A, 1999, 30A:2089–9610.1007/s11661-999-0019-7 ↗
13. D.P. Fairchild, D.G. Howden, W.A.T. Clark: Metall. Mater. Trans. A, 2000, 31A:641–5210.1007/s11661-000-0007-4 ↗
14. M.A. Linaza, J.L. Romero, J.M. Rodriguez-Ibabe, J.J. Urcola: Scripta Metall. Mater., 1995, 32:395–40010.1016/S0956-716X(99)80071-5 ↗
15. M.J. Balart, C.L. Davis, M. Strangwood: Mater. Sci. Eng., A, 2000, 284:1–1310.1016/S0921-5093(00)00803-0 ↗
16. W. Yan, Y.Y Shan, K. Yang: Metall. Mater. Trans. A, 2006, 37A:2147–58.10.1007/BF02586135 ↗
17. J.H. Tweed, J.F. Knott: Acta Metall., 1981, 29:1401–1410.1016/0001-6160(81)90175-9 ↗
18. D.P. Fairchild, D.G. Howden, W.A.T. Clark: Metall. Mater. Trans. A, 2000, 31A:653–6710.1007/s11661-000-0008-3 ↗
19. T.R. Wilshaw, C.A. Rau, A.S. Tetelman: Eng. Fract. Mech., 1968, 1:191–21110.1016/0013-7944(68)90025-8 ↗
20. C. Yan, J.H. Chen, J. Sun, Z. Wang: Metall. Mater. Trans. A, 1993, 24A:1381–8910.1007/BF02668206 ↗
21. J.H. Chen, G.Z. Wang, Z. Wang, L. Zhu, Y.Y. Gao: Metall. Mater. Trans. A, 1991, 22A:2287–9610.1007/BF02664994 ↗
22. J.H. Chen, G.Z. Wang, Q. Wang: Metall. Mater. Trans. A, 2002, 33A:3393–340210.1007/s11661-002-0327-7 ↗
23. J.H. Chen, L. Zhu, H. Ma: Acta Metall., 1990, 38:2527–3510.1016/0956-7151(90)90264-H ↗
24. J.H. Chen, Z. Li, G.Z. Wang: Metall. Mater. Trans. A, 2003, 34A:1055–6810.1007/s11661-003-0126-9 ↗
25. A.P. Green, B.B. Hundy: J. Mech. Phys. Solids, 1956, 4:128–4410.1016/0022-5096(56)90085-0 ↗
26. Y. Zhong et al. Acta Mater., 2006, 54:435–43.10.1016/j.actamat.2005.09.015 ↗
27. X.J. Zhang, R.L. Tregoning, R.W. Armstrong, and G.R. Irwin: George R. Irwin Symp. on Cleavage Fracture, Proc. Symp. 1997 TMS Fall Meeting, Indianapolis, IN, Sept. 15–17, 1997, Kwai S. Chan, ed., TMS, Warrendale, PA, 1997, pp. 69–79
28. A. Moitra, P.R. Sreenivasan, S.L. Mannan, V. Singh: Metall. Mater. Trans. A, 2005, 36A:295710.1007/s11661-005-0069-4 ↗
29. M.G. Vassilaros: Ph.D. Thesis, The University of Cambridge, Cambridge, United Kingdom, 1991
30. G.M. Madan, L.G. Robert, M.D. Dennis: Metall. Mater. Trans. A, 1996, 27A:3903–12.
31. T.L. Anderson: Fracture Mechanics: Fundamentals and Applications, CRC Press. Inc., Boston, MA, 1991, pp. 322–42
32. J.H. Chen, G.Z. Wang, C. Yan, H. Ma, L. Zhu: Int. J. Fract., 1997, 83:121–3810.1023/A:1007304900578 ↗
33. G.Z. Wang, J.H. Chen: Int. J. Fract., 1998, 89:269–8410.1023/A:1007464126165 ↗
34. R.W. Armstrong, G.R. Irwin, and X.J. Zhang: George R. Irwin Symp. on Cleavage Fracture, Proc. Symp. 1997 TMS Fall Meeting, Indianapolis, IN, Sept. 15–17, 1997, Kwai S. Chan, ed., TMS, Warrendale, PA, 1997, pp. 51–58
35. A. Echeverría, J.M. Rodriguez-Ibabe: Mater. Sci. Eng. A, 2003, 346:149–5810.1016/S0921-5093(02)00538-5 ↗
36. T. Lin, A.G. Wvans, R.O. Ritchie: J. Mech. Phys. Solids, 1986, 34:477–9710.1016/0022-5096(86)90013-X ↗
37. A.P. Green, B.B. Hundy: J. Mech. Phys. Solids, 1956, 4:128–4410.1016/0022-5096(56)90085-0 ↗
38. J.R. Griffiths, D.R.J. Owen: J. Mech. Phys. Solids, 1971, 19:419–3110.1016/0022-5096(71)90009-3 ↗
39. D.T. Zhang: The Nonmetallic Inclusions in Steels, Mechanical Industry Press, Beijing, 1991, p. 282
40. D.P. Fairchild, D.G. Howden, W.A.T. Clark: Metall. Mater. Trans. A, 2000, 31A:652–67
41. J.H. Chen, C. Yan: Mater. Sci. Technol., 1988, 4:732–3910.1179/mst.1988.4.8.732 ↗
42. A.S. Tetelman, A.J. McEvily Jr.: Fracture of Structural Materials, Wiley Series on the Science and Technology of Materials, John Wiley and Sons, Inc., New York, NY, p. 311
43. Y.J. Park, I.M. Bernstein: Metall. Trans. A, 1979, 10A, pp 1653–6410.1007/BF02811698 ↗
44. J.J. Lewandowski, A.W. Thompson: Metall. Trans. A, 1986, 17A:1769–8610.1007/BF02817275 ↗
45. D.C. Curry, J.F. Knott: Met. Sci., 1978, 12:51110.1016/0036-9748(78)90198-9 ↗
46. J.H. Chen, Y. Kikuta, T. Araki, M. Yoheda, Y. Matsuda: Acta Metall, 1984, 32:1779–8810.1016/0001-6160(84)90234-7 ↗
47. Z. Chen, Z.W. Shan, N.Q. Wu, V.K. Sikka, M.J. Hua, Scott X. Mao: Metall. Mater. Trans. A, 2004, 35A:1281–8810.1007/s11661-004-0302-6 ↗