Effects of martensite morphology and volume fraction on quasi-static and dynamic deformation behavior of dual-phase steels
Source abstract
Abstract
The effects of martensite morphology and volume fraction on the quasi-static and dynamic deformation behavior of dual-phase steels were investigated in this study. Quasi-static and dynamic torsional tests were conducted using a torsional Kolsky bar for four steel specimens, which had different martensite morphology and volume fraction, and then the test data were compared via microstructures, tensile properties, and fracture mode. In the intermediate quenched (IQ) steel specimens, very fine fibrous martensites were well distributed in the ferrite matrix, but bulky martensites were mixed with ferrites in the step quenched (SQ) specimens. Quasi-static torsional properties were similar to tensile properties, and fracture occurred in a ductile mode in IQ specimens, whereas cleavage fracture was predominated in SQ specimens. Under a dynamic loading condition, the fracture mode of SQ specimens was changed from cleavage to ductile fracture, whereas IQ specimens had a ductile fracture mode, irrespective of loading rate. These phenomena were analyzed using a shear lag model, phase continuity, and the thermal softening effect of martensite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. R.G. Davies: Metall. Trans. A, 1978, vol. 9A, pp. 41–52.10.1007/BF02647169 ↗
2. G. Thomas and J.Y. Koo: Structure and Properties of Dual Phase Steels, R.A. Kot and J.W. Morris, eds., AIME, New York, NY, 1979, pp. 183–201.
3. R.G. Davies: Formable HSLA and Dual Phase Steels, A.T. Davenport, ed., AIME, New York, NY, 1979, pp. 182–201.
4. G.R. Speich and R.L. Miller: Structure and Properties of Dual Phase Steels, R.A. Kot and J.W. Morris, eds., AIME, New York, NY, 1979, pp. 21–39.
5. R.G. Davies: Metall. Trans. A, 1979, vol. 10A, pp. 113–18.10.1007/BF02686414 ↗
6. H. Fischmeister and B. Karlsson: Z. Metallkd., 1977, vol. 65, pp. 311–32.
7. J. Gurland: Mater. Sci. Eng., 1979, vol. 40, pp. 59–71.10.1016/0025-5416(79)90008-9 ↗
8. R. Stevenson: Formable HSLA and Dual Phase Steels, A.T. Davenport, ed., AIME, New York, NY, 1979, pp. 99–108.
9. N.J. Kim and G. Thomas: Metall. Trans. A, 1981, vol. 12A, pp. 483–89.10.1007/BF02648546 ↗
10. D. Suh, D. Kwon, S. Lee, and N.J. Kim: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 504–09.10.1007/s11661-997-0152-0 ↗
11. Metals Handbook, 9th ed., ASM, Metals Park, OH, 1990, vol. 8, pp. 218–28.
12. K. Cho, S. Lee, S.R. Nutt, and J. Duffy: Acta Metall. Mater., 1993, vol. 41, pp. 923–32.10.1016/0956-7151(93)90026-O ↗
13. K. Cho, Y.C. Chi, and J. Duffy: Metall. Trans. A, 1990, vol. 21A, pp. 1161–175.10.1007/BF02698247 ↗
14. C.L. Wittman, M.A. Meyers, and H.-R. Pak: Metall. Trans. A, 1990, vol. 21A, pp. 707–16.10.1007/BF02671941 ↗
15. D. Hull: An Introduction to Composite Materials, Cambridge University Press, New York, NY, 1981, pp. 92–96.
16. J. Gurland: Scripta Metall., 1979, vol. 13, pp. 967–69.10.1016/0036-9748(79)90330-2 ↗
17. A.F. Szewczyk and J. Gurland: Metall. Trans. A, 1982, vol. 13A, pp. 1821–26.10.1007/BF02647838 ↗
18. K. Cho and J. Gurland: Metall. Trans. A, 1988, vol. 19A, pp. 2027–40.10.1007/BF02645206 ↗
19. K.J. Kim, C.G. Lee, and S. Lee: Scripta Mater., 1998, vol. 38, pp. 27–32.10.1016/S1359-6462(97)00428-4 ↗
20. J. Wadsworth, I.G. Plamer, and D.D. Crooks: Scripta Metall., 1983, vol. 17, pp. 346–52.10.1016/0036-9748(83)90171-0 ↗
21. J.V. Craig and T.A.C. Stock: J. Aust. Inst. Met., 1970, vol. 15, pp. 1–5.
22. M.A. Meyers and C.L. Wittman: Metall. Trans. A, 1990, vol. 21A, pp. 3153–64.10.1007/BF02647311 ↗
23. A. Marchand and J. Duffy: J. Mech. Phys. Solids, 1988, vol. 36, pp. 251–83.10.1016/0022-5096(88)90012-9 ↗
24. T. Quadir and P. Shewmon: Metall. Trans. A, 1981, vol. 21A, pp. 1163–76.10.1007/BF02642330 ↗
25. A.L. Wingrove: Metall. Trans., 1973, vol. 4, pp. 1829–33.10.1007/BF02665409 ↗
26. T.A.C. Stock and K.R.L. Thompson: Metall. Trans., 1970, vol. 1, pp. 219–24.10.1007/BF02819264 ↗
27. Y. Me-Bar and D.S. Shechtman: Mater. Sci. Eng., 1983, vol. 58, pp. 181–88.10.1016/0025-5416(83)90044-7 ↗
28. S.P. Timothy and I.M. Hutchings: Mater. Sci. Technol., 1985, vol. 1, pp. 526–30.10.1179/mst.1985.1.7.526 ↗
29. S. Lee, K. Cho, C.S. Lee, and W.Y. Choo: Metall. Trans. A, 1993, vol. 24A, pp. 2217–24.10.1007/BF02648596 ↗
30. S.P. Thimothy and I.M. Hutchings: Acta Metall., 1985, vol. 33, pp. 667–76.10.1016/0001-6160(85)90030-6 ↗
31. S. Lee, K.J. Kim, K. Cho, and W.B. Choi: Metall. Trans. A, 1993, vol. 24A, pp. 895–900.10.1007/BF02656510 ↗