journal article·2012-12

Enhanced Mechanical Properties of As-Forged Co-Cr-Mo-N Alloys with Ultrafine-Grained Structures

Kenta Yamanaka, Manami Mori, Akihiko Chiba

Publisher page

Abstract

The ultrafine-grained (UFG) microstructures of Ni-free Co-29Cr-6Mo (mass pct) alloys, which are designed for biomedical applications, have been successively fabricated by the conventional hot-forging process. The grain size decreased with increasing hot-forging reduction, and the equiaxed UFG structures with a mean grain size less than 1 μm were obtained in 83 pct (true strain of 1.8) hot-forged specimens. Significant grain refinement drastically enhanced tensile strength; dislocations residual in the grains also play a crucial role for strengthening of the UFG-structured specimen. The elongation decreased with the reduction in grain size. However, we revealed that the addition of nitrogen, which is one of the nontoxic γ phase (face-centered cubic [fcc] structure) stabilizer, improves the ductility of the UFG alloys remarkably with maintaining high strength. It was deduced that the enhanced ductility in the UFG material by N doping was related to constituent phase and strain-induced martensitic transformation behavior: the addition of nitrogen eliminated athermal e martensite detrimental to tensile elongation, and strain-induced martensitic transformation effectively increased work-hardening rate to avoid the plastic instability at the early stage of deformation. The present method characterized by ultragrain refinement in conjunction with nitrogen addition to stabilize the γ phase can provide a potent strategy to obtain superior combination of high strength and adequate ductility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Advanced materials and composites · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. M.G. Shettlemore and K.J. Bundy: Biomaterials, 2001, vol. 22, pp. 2215–28.10.1016/S0142-9612(00)00410-5 ↗
2. H.Y. Lin and J.D. Bumgardner: Biomaterials, 2004, vol. 25, pp. 1233–38.10.1016/j.biomaterials.2003.08.016 ↗
3. A. Chiba, K. Kumagai, N. Nomura, and S. Miyakawa: Acta Mater., 2007, vol. 55, pp. 1309–18.10.1016/j.actamat.2006.10.005 ↗
4. A.J. Saldivar-Garcia and H.F. López: J. Biomed. Mater. Res., 2005, vol. 74A, pp. 269–74.10.1002/jbm.a.30392 ↗
5. H.S. Dobbs and J.L.M. Robertson: J. Mater. Sci., 1983, vol. 18, pp. 391–401.10.1007/BF00560627 ↗
6. M. Mori, K. Yamanaka, H. Matsumoto, and A. Chiba: Mater. Sci. Eng. A, 2010, vol. 528, pp. 614–21.10.1016/j.msea.2010.09.002 ↗
7. P. Huang and H.F. López: Mater. Lett., 1999, vol. 39, pp. 249–53.10.1016/S0167-577X(99)00022-1 ↗
8. N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893–99.10.1016/S1359-6462(02)00282-8 ↗
9. N. Tsuji, S. Okuno, Y. Koizumi, and Y. Minamino: Metall. Mater. Trans. A, 2004, vol. 45, pp. 2272–81.
10. R. Valiev: Nat. Mater., 2004, vol. 3, pp. 511–16.10.1038/nmat1180 ↗
11. A. Azushima, R. Kopp, A. Korhonen, D.Y. Yang, F. Micari, G.D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski, and A. Yanagida: CIRP Ann. Manuf. Technol., 2008, vol. 57, pp. 716–35.10.1016/j.cirp.2008.09.005 ↗
12. Y. Fukuda, K. Oh-ishi, A. Horita, and T.G. Langdon: Acta Mater., 2002, vol. 50, pp. 1359–68.10.1016/S1359-6454(01)00441-4 ↗
13. O. Sitdikov, T. Sakai, E. Avtokratova, R. Kaibyshev, K. Tsuzaki, and Y. Watanabe: Acta Mater., 2008, vol. 56, pp. 821–34.10.1016/j.actamat.2007.10.029 ↗
14. Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, and R.G. Hong: Scripta Mater., 1998, vol. 39, pp. 1221–27.10.1016/S1359-6462(98)00302-9 ↗
15. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
16. A. Belyakov, T. Sakai, H. Miura, R. Kaibyshev, and K. Tsuzaki: Acta Mater., 2002, vol. 50, pp. 1547–57.10.1016/S1359-6454(02)00013-7 ↗
17. J. Xing, X. Yang, H. Miura, and T. Sakai: Metall. Mater. Trans. A, 2008, vol. 49A, pp. 69–75.
18. S. Takaki, K. Kawasaki, and Y. Kimura: J. Mater. Process. Tech., 2001, vol. 117, pp. 359–63.10.1016/S0924-0136(01)00797-X ↗
19. N. Tsuji and T. Maki: Scripta Mater., 2009, vol. 60, pp. 1044–49.10.1016/j.scriptamat.2009.02.028 ↗
20. R. Ueji, N. Tsuji, Y. Minamino, and Y. Koizumi: Acta Mater., 2002, vol. 50, pp. 4177–89.10.1016/S1359-6454(02)00260-4 ↗
21. Y. Okitsu, N. Takata, and N. Tsuji: Scripta Mater., 2009, vol. 60, pp. 76–79.10.1016/j.scriptamat.2008.09.002 ↗
22. K. Yamanaka, M. Mori, S. Kurosu, H. Matsumoto, and A. Chiba: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1980–94.10.1007/s11661-009-9879-0 ↗
23. A. Chiba, X.G. Li, and M.S. Kim: Philos. Mag. A, 1999, vol. 79, pp. 1533–54.10.1080/01418619908210378 ↗
24. P. Huang and H.F. López: Mater. Lett., 1999, vol. 39, pp. 244–48.10.1016/S0167-577X(99)00021-X ↗
25. A. Mani, Salinas-Rodriguez, and H.F. López: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3037–43.10.1016/j.msea.2010.12.024 ↗
26. K. Yamanaka, M. Mori, and A. Chiba: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5961–66.10.1016/j.msea.2011.04.027 ↗
27. N. Tsuji, N. Kamikawa, R. Ueji, N. Takata, H. Koyama, and D. Terada: ISIJ Int., 2008, vol. 48, pp. 1114–21.10.2355/isijinternational.48.1114 ↗
28. H. Kitahara, N. Tsuji, and Y. Minamino: Mater. Sci. Forum, 2006, vols. 503–504, pp. 913–18.10.4028/www.scientific.net/MSF.503-504.913 ↗
29. N. Takata, S.H. Lee, C.Y. Lim, S.S. Kim, and N. Tsuji: J. Nanosci. Nanotechnol., 2007, vol. 7, pp. 3985–89.10.1166/jnn.2007.073 ↗
30. S.H. Lee, N. Nomura, and A. Chiba: Mater. Trans., 2008, vol. 49, pp. 260–64.10.2320/matertrans.MRA2007220 ↗
31. S. Kurosu, H. Matsumoto, and A. Chiba: Mater. Lett., 2009, vol. 64, pp. 49–52.10.1016/j.matlet.2009.10.001 ↗
32. S. Kurosu, H. Matsumoto, and A. Chiba: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2613–25.10.1007/s11661-010-0273-8 ↗
33. A. Chiba, K. Kumagai, H. Takeda, and N. Nomura: Mater. Sci. Forum, 2005, vols. 475–479, pp. 2317–22.10.4028/www.scientific.net/MSF.475-479.2317 ↗
34. M. Mori, K. Yamanaka, S. Sato, K. Wagatsuma, and A. Chiba: Metall. Mater. Trans. A, in press.
35. S. Takaki, H. Nakatsu, and Y. Tokunaga: Metall. Trans., 1993, vol. 34, pp. 489–95.
36. J. Jun and C. Choi: Mater. Sci. Eng. A, 1998, vol. 257, pp. 353–56.10.1016/S0921-5093(98)00994-0 ↗
37. Y.P. Li, J.S. Yu, S. Kurosu, Y. Koizumi, H. Matsumoto, and A. Chiba: Mater. Chem. Phys., 2012, vol. 133, pp. 29–32.10.1016/j.matchemphys.2011.12.081 ↗
38. J. Talonen and H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108–18.10.1016/j.actamat.2007.07.015 ↗
39. K. Lu, F.K. Yan, H.T. Wang, and N.R. Tao: Scripta Mater., 2012, vol. 66, pp. 878–83.10.1016/j.scriptamat.2011.12.044 ↗
40. H. Ueno, K. Kanihata, Y. Kaneko, S. Hashimoto, and A. Vinogradov: Acta Mater., 2011, vol. 59, pp. 7060–69.10.1016/j.actamat.2011.07.061 ↗
41. A. Salinas-Rodriguez, and J.L. Rodriguez-Galicia: J. Biomed. Mater. Res., 1996, vol. 31, pp. 409–19.10.1002/(SICI)1097-4636(199607)31:3<409::AID-JBM16>3.0.CO;2-D ↗
42. Y. Okazaki: Metall. Mater. Trans. A, 2008, vol. 49, pp. 817–23.
43. N. Kamikawa, X. Huang, N. Tsuji, and N. Hansen: Acta Mater., 2009, vol. 57, pp. 4198–4208.10.1016/j.actamat.2009.05.017 ↗
44. R. Yoda, T. Yokomaku, and N. Tsuji: Mater. Charact., 2010, vol. 61, pp. 913–22.10.1016/j.matchar.2010.05.006 ↗
45. J. Hou, T. Shoji, Z.P. Lu, Q.J. Peng, J.Q. Wang, E.H. Han, and W. Ke: J. Nucl. Mater., 2010, vol. 397, pp. 109–15.10.1016/j.jnucmat.2009.12.016 ↗
46. Y. Miyajima, M. Mitsuhara, S. Hata, H. Nakashima, and N. Tsuji: Mater. Sci. Eng. A, 2010, vol. 528, pp. 776–79.10.1016/j.msea.2010.09.058 ↗
47. J.W. Morris: The Influence of Grain size on the Mechanical Properties of Steel, presented at the International Symposium on Ultrafine Grained Steels, 2001.10.2172/861397 ↗
48. M.L.G. Byrnes, M. Grujicic, and W.S. Owen: Acta Metall., 1987, vol. 35, pp. 1853–62.10.1016/0001-6160(87)90131-3 ↗
49. J.W. Morris, Z. Guo, C.R. Krennand, and Y.H. Kim: ISIJ Int., 2001, vol. 41, pp. 599–611.10.2355/isijinternational.41.599 ↗
50. H. Nakatsu and S. Takaki: J. Jpn. Inst. Metals., 1996, vol. 60, pp. 141–48.10.2320/jinstmet1952.60.2_141 ↗
51. H. Nakatsu, T. Miyata, and S. Takaki: J. Jpn. Inst. Metals., 1996, vol. 60, pp. 936–43.10.2320/jinstmet1952.60.10_936 ↗
52. N. Takata, Y. Ohtake, K. Kita, K. Kitagawa, and N. Tsuji: Scripta Mater., 2009, vol. 60, pp. 590–93.10.1016/j.scriptamat.2008.12.018 ↗
53. A. Sato, K. Soma, and T. Mori: Acta Metall., 1982, vol. 30, pp. 1901–07.10.1016/0001-6160(82)90030-X ↗
54. S. Kurosu, H. Matsumoto, A. Chiba, C. Landron, D. Fabregue, and E. Maire: Scripta Mater., 2011, vol. 64, pp. 367–70.10.1016/j.scriptamat.2010.07.032 ↗
55. B.S. Lee, H. Matsumoto, and A. Chiba: Mater. Lett., 2011, vol. 65, pp. 843–46.10.1016/j.matlet.2010.12.007 ↗
56. Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, N. Minakawa, A. Moriai, and Y. Morii: Acta Mater., 2004, vol. 52, pp. 5737–45.10.1016/j.actamat.2004.08.016 ↗
57. Y.H. Zhao, J.F. Bingert, Y.T. Zhu, X.Z. Liao, R.Z. Valiev, Z. Horita, T.G. Langdon, Y.Z. Zhou, and E.J. Lavernia: App. Phys. Lett., 2008, vol. 92, pp. 081903.10.1063/1.2870014 ↗