journal article·2012-11

Effect of Boron on Carbide Coarsening at 873 K (600 °C) in 9 to 12 pct Chromium Steels

Fang Liu, Dan H.R. Fors, Ardeshir Golpayegani, Hans-Olof Andrén, Göran Wahnström

Publisher page

Abstract

The addition of small amounts of boron to 9 to 12 pct chromium steels has been found to decrease their creep rate at 823 K to 923 K (550 °C to 650 °C). In this article, the behavior of boron during austenitizing, tempering, and isothermal heat treatment at 873 K (600 °C) is studied using high-resolution microscopy and microanalysis as well as using atomistic modeling. It was found that increasing the boron content from 9 to 40 ppm decreased the coarsening constant of M23C6 by a factor of almost 2. Most of the added boron was incorporated in M23C6. Atomistic modeling showed that boron diffusion in ferrite is dominated by an interstitial mechanism at 873 K (600 °C). However, the generation of vacancies when carbide precipitates dissolve may promote a distribution with substitutional boron atoms. The absence of a fast mechanism for the transition from substitutional to interstitial occupancy will make the slow substitutional boron diffusion in the matrix rate controlling for the coarsening process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. R. Blum, J. Hald, W. Bendick, A. Rosselet, and J.C. Vaillant: VGB Kraftw. Tech., 1994, vol. 74, pp. 641–52.
2. T.-U. Kern, K.H. Mayer, B. Donth, G. Zeiler, and A. DiGianfrancesco: 9th Liege Conference: Materials for Advanced Power Engineering, J. Lecomte-Beckers, Q. Contrepois, T. Beck, and B. Kuhn, eds., Liege, Belgium, 2010, pp. 29–38.
3. J. Hald: 9th Liege Conference: Materials for Advanced Power Engineering, J. Lecomte-Beckers, Q. Contrepois, T. Beck, and B. Kuhn, eds., Liege, Belgium, 2010, pp. 55–66.
4. F. Abe, M. Tabuchi, S. Tsukamoto, and T. Shirane: Int. J. Press. Ves. Pip., 2010, vol. 87, pp. 598–604.10.1016/j.ijpvp.2010.08.005 ↗
5. F. Abe: Creep-Resistant Steels, T.-U. Kern and R. Viswanathan, eds., Woodhead Publishing Limited, Cambridge, U.K., 2008, pp. 279–301.10.1533/9781845694012.2.279 ↗
6. J.F. Mansfield: J. Mater.Sci., 1987, vol. 22, pp. 1277–85.10.1007/BF01233121 ↗
7. K. Maruyama, K. Sawada, and J.-I. Koike: ISIJ Int., 2001, vol. 41, pp. 641–53.10.2355/isijinternational.41.641 ↗
8. L. Lundin, S. Fällman, and H.-O. Andrén: Mater. Sci. Technol., 1997, vol. 13, pp. 233–42.10.1179/026708397790302485 ↗
9. M. Hättestrand, M. Schwind, and H.-O. Andrén: Mater. Sci. Eng. A, 1998, vol. 250, pp. 27–36.10.1016/S0921-5093(98)00532-2 ↗
10. M. Hättestrand, H.-O. Andrén, L. Lundin, and M. Schwind: Mater. Sci. Eng. A, 1999, vol. 270, pp. 33–37.10.1016/S0921-5093(99)00232-4 ↗
11. M. Hättestrand, M. Schwind, and H.-O. Andrén: Advanced Heat Resistant Steels for Power Generation, R. Viswanathan and J. Nutting, eds., IOM Communications Ltd., London, U.K., 1999, p. 199.
12. L. Lundin, M. Hättestrand, and H.-O. Andrén: Parsons 2000 Advanced Materials for 21st Century Turbines and Power Plants, A. Strang, W.M. Banks, R.D. Conroy, G.M. McColvin, J.C. Neal, and S. Simpson, eds., The Institute of Materials, London, U.K., 2000, pp. 603–17.
13. A. Golpayegani, M. Hättestrand, and H.-O. Andrén: Parsons 2003 Engineering Issues in Turbine Machinery, Power Plant and Renewables, A. Strang, R.D. Conroy, W.M. Banks, M. Blacker, J. Legget, G.M. McColvin, S. Simpson, M. Smith, F. Starr, and R.W. Vanstone, eds., The Institute of Materials, Dublin, Ireland, 2003, pp. 347–63.
14. A. Golpayegani and H.-O. Andrén: Parsons 2007, Power Generation in an Era of Climate Change, A. Strang, W.M. Banks, G.M. McColvin, J.E. Oakley, and R.W. Vanstone, eds., London, U.K., 2007, pp. 533–41.
15. H.-O. Andrén and A. Golpayegani: New Developments on Metallurgy and Applications of High Strength Steels, Buenos Aires, Argentina, 2008, p. 16.
16. A. Golpayegani, F. Liu, H. Svensson, M. Andersson, and H.-O. Andrén: Metall. Mater. Trans, A, 2011, vol. 42A, pp. 940–51.10.1007/s11661-010-0555-1 ↗
17. P. Warbichler, F. Hofer, P. Hofer, and E. Letofsky: Micron, 1998, vol. 29, pp. 63–72.10.1016/S0968-4328(97)00054-1 ↗
18. M. Hättestrand and H.-O. Andrén: Micron, 2001, vol. 32, pp. 789–97.10.1016/S0968-4328(00)00086-X ↗
19. B. Sonderegger: Ultramicroscopy, 2006, vol. 106, pp. 941–50.10.1016/j.ultramic.2006.04.004 ↗
20. G. Kresse and J. Hafner: Phys. Rev. B, 1994, vol. 49, pp. 14251–69.10.1103/PhysRevB.49.14251 ↗
21. G. Kresse and J. Furthmuller: Phys. Rev. B, 1996, vol. 54, pp. 11169–86.10.1103/PhysRevB.54.11169 ↗
22. G. Kresse and J. Furthmuller: Comput. Mater. Sci., 1996, vol. 6, pp. 15–50.10.1016/0927-0256(96)00008-0 ↗
23. J.P. Perdew, K. Burke, and M. Ernzerhof: Phys. Rev. Lett., 1996, vol. 77, pp. 3865–68.10.1103/PhysRevLett.77.3865 ↗
24. G. Kresse and D. Joubert: Phys. Rev. B, 1999, vol. 59, pp. 1758–75.10.1103/PhysRevB.59.1758 ↗
25. F. Liu and H.-O. Andrén: Ultramicoscopy, 2011, vol. 111, pp. 633–41.10.1016/j.ultramic.2010.12.012 ↗
26. M. Thuvander, J. Weidow, J. Angseryd, L.K.L. Falk, F. Liu, M. Sonestedt, K. Stiller, and H.-O. Andrén: Ultramicoscopy, 2011, vol. 111, pp. 604–08.10.1016/j.ultramic.2010.12.024 ↗
27. O.C. Hellman, J.A. Vandenbroucke, J. Rusing, D. Isheim, and D.N. Seidman: Microsc. Microanal., 2000, vol. 6, pp. 437–44.10.1007/S100050010051 ↗
28. D.H.R. Fors and G. Wahnstrom: Phys. Rev. B, 2008, vol. 82, p. 195410.10.1103/PhysRevB.82.195410 ↗
29. H. Hirota: J. Phys. Soc. Jpn. 1967, vol. 23, p. 512.10.1143/JPSJ.23.512 ↗
30. A.L. Bowman, G.P. Arnold, E.K. Storms, and N.G. Nereson: Acta Crystallogr. Sect. B-Struct. Crystallogr. Cryst. Chem. B, 1972, vol. 28, p. 3102.10.1107/S0567740872007526 ↗
31. F. Abe: Int. J. Mater. Res., 2008, pp. 387–94.
32. L. Karlsson and H. Nordén: Acta Metall., 1988, vol. 36, pp. 13–24.10.1016/0001-6160(88)90024-7 ↗
33. K. Sakuraya, H. Okada, and F. Abe: The 4 th Int. Conf. on Advances in Materials Technology for Possil Power Plants, ASM International, Hilton Head Island, SC, 2004, pp. 1270–79.
34. M. Hättestrand and A. Bjärbo: Metall. Mater. Trans. A, 2001, vol. 32A, p. 19.
35. T. Horiuchi, M. Igarashi, and F. Abe: ISIJ Int., 2002, vol. 42, pp. 67–71.10.2355/isijinternational.42.Suppl_S67 ↗
36. J. Hald and L. Korcakova: ISIJ Int., 2003, vol. 43, pp. 420–27.10.2355/isijinternational.43.420 ↗
37. A. Umantsev and G.B. Olson: Scripta Metall. Mater., 1993, vol. 29, pp. 1135–40.10.1016/0956-716X(93)90191-T ↗
38. J. Ågren, M.T. Clavaguera-Mora, J. Golcheski, G. Inden, H. Kumar, and C. Sigli: CALPHAD, 2000, vol. 24, pp. 41–54.10.1016/S0364-5916(00)00014-6 ↗
39. H. Semba and F. Abe: The 4 th Int. Conf. on Advances in Materials Technology for Possil Power Plants, R. Viswanathan, D. Gandy, and K. Coleman, eds., ASM International, Hilton Head Island, SC, 2004, p. 1229.10.31399/asm.cp.am-epri-2004p1229 ↗