Role of Nanostructure in Electrochemical Corrosion and High Temperature Oxidation: A Review
Source abstract
Abstract
The extremely fine grain size of nanocrystalline (nc) metallic alloys results in significantly different mechanical, electrochemical and oxidation properties as compared to the coarse-grained alloys of the same composition. Although the synthesis and attractive mechanical properties of nanocrystalline materials have been investigated and reviewed in great depth, the high temperature oxidation and electrochemical corrosion of these materials has received limited attention. The difference in the active dissolution and passivation behavior of nc alloys as compared to their microcrystalline counterparts varies for each alloy system. However, a unified theory explaining these phenomena still eludes us. In this context, this article reviews the progress in the electrochemical corrosion behavior of different nanocrystalline alloys, and hence, develops a better understanding of the effect of grain size, composition, interfacial phenomena and selective dissolution on corrosion of nanocrystalline alloys. This review also presents the role of nanometric grain size and the associated increase in grain boundary diffusion on the high temperature oxidation of nc alloys. The attractive possibility of enhanced oxidation resistance at lower alloying additions as compared to the coarse-grained alloys has been discussed. Although the primary focus of the article is on ferrous alloy systems, however, the lead studies on the role of ultrafine grain size in oxidation/corrosion behavior of other alloys systems have also been reviewed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. R. W. Siegel, Nanostruct. Mater., 1994, vol. 4(1), pp. 121-138.10.1016/0965-9773(94)90134-1 ↗
2. C. Suryanarayana and F. Froes, Metall. Trans. A, 1992, vol. 23, pp. 1071-1081.10.1007/BF02665039 ↗
3. H. Tanimoto, P. Farber, R. Würschum, R. Z. Valiev and H. E. Schaefer, Nanostructured Materials, 1999, vol. 12(5-8), pp. 681-684.10.1016/S0965-9773(99)00216-0 ↗
4. C. C. Koch, K. M. Youssef, R. O. Scattergood and K. L. Murty, Adv. Eng. Mater., 2005, vol. 7(9), pp. 787-794.10.1002/adem.200500094 ↗
5. K.D. Ralston and N. Birbilis: Corrosion, 2010, vol. 66(7), p. 075005.10.5006/1.3462912 ↗
6. K. D. Ralston, N. Birbilis and C. H. J. Davies, Scripta Mater., 2010, vol. 63(12), pp. 1201-1204.10.1016/j.scriptamat.2010.08.035 ↗
7. G. R. Argade, S. K. Panigrahi and R. S. Mishra, Corros. Sci., 2012, vol. 58, pp. 145-151.10.1016/j.corsci.2012.01.021 ↗
8. R. K. S. Raman and R. K. Gupta, Corrosion Science, 2009, vol. 51(2), pp. 316-321.10.1016/j.corsci.2008.10.020 ↗
9. R. Rofagha, U. Erb, D. Ostrander, G. Palumbo and K. T. Aust, Nanostruct. Mater., 1993, vol. 2(1), pp. 1-10.10.1016/0965-9773(93)90044-C ↗
10. R. Rofagha, R. Langer, A. M. El-Sherik, U. Erb, G. Palumbo and K. T. Aust, Scripta Metall. Mater., 1991, vol. 25, pp. 2867.10.1016/0956-716X(91)90171-V ↗
11. R. Kirchheim, X. Y. Huang, P. Cui, R. Birringer and H. Gleiter, Nanostruct. Mater., 1992, vol. 1(2), pp. 167-172.10.1016/0965-9773(92)90071-5 ↗
12. H. Gleiter, Progress in Materials Science, 1989, vol. 33(4), pp. 223-315.10.1016/0079-6425(89)90001-7 ↗
13. R. W. Siegel, Annual Review of Materials Science, 1991, vol. 21(1), pp. 559-578.10.1146/annurev.ms.21.080191.003015 ↗
14. R. W. Siegel, Nanostructured Materials, 1993, vol. 3(1-6), pp. 1-18.10.1016/0965-9773(93)90058-J ↗
15. G. J. Thomas, R. W. Siegel and J. A. Eastman, Scripta Metallurgica et Materialia, 1990, vol. 24(1), pp. 201-206.10.1016/0956-716X(90)90592-5 ↗
16. R.W. Siegel: MRS Bull., 1990, vol. 15(10), p. 60.10.1557/S0883769400058681 ↗
17. R. W. Siegel, Materials Science and Engineering: A, 1993, vol. 168(2), pp. 189-197.10.1016/0921-5093(93)90726-U ↗
18. H. J. Fecht, Nanostructured Materials, 1992, vol. 1(2), pp. 125-130.10.1016/0965-9773(92)90064-5 ↗
19. X. Zhu, R. Birringer, U. Herr, and H. Gleiter: Phys. Rev. B, 1987, vol. 35, p. 9085.10.1103/PhysRevB.35.9085 ↗
20. T. Haubold, R. Birringer, B. Lengeler and H. Gleiter, Physics Letters A, 1989, vol. 135(8-9), pp. 461-466.10.1016/0375-9601(89)90049-2 ↗
21. T. Mütschele and R. Kirchheim, Scripta Metallurgica, 1987, vol. 21(8), pp. 1101-1104.10.1016/0036-9748(87)90258-4 ↗
22. J. Horvath, R. Birringer and H. Gleiter, Solid State Co mmunications, 1987, vol. 62(5), pp. 319-322.10.1016/0038-1098(87)90989-6 ↗
23. G. Wallner, E. Jorra, H. Franz, J. Peisl, R. Birringer, H. Gleiter, T. Haubold and W. Petry, Mater. Res. Symp. Proc., 1989, vol. 132, pp. 149.
24. H. Gleiter, Acta Materialia, 2000, vol. 48(1), pp. 1-29.10.1016/S1359-6454(99)00285-2 ↗
25. R. Birringer, Materials Science and Engineering: A, 1989, vol. 117, pp. 33-43.10.1016/0921-5093(89)90083-X ↗
26. C. Suryanarayana, International Materials Reviews, 1995, vol. 40, pp. 41-64.10.1179/imr.1995.40.2.41 ↗
27. K. Lu, Mater. Sci. Eng. R, 1996, vol. 16, pp. 61.
28. T. R. Malow and C. C. Koch, Acta Materialia, 1997, vol. 45(5), pp. 2177-2186.10.1016/S1359-6454(96)00300-X ↗
29. J. Joardar, S. K. Pabi, H. Fecht and B. S. Murthy, Philosophical Magazine A, 2002, vol. 82, pp. 469-475.
30. E. Bonetti, L. Del Bianco, L. Pasquini and E. Sampaolesi, Nanostruct. Mater., 1999, vol. 12(5-8), pp. 685-688.10.1016/S0965-9773(99)00217-2 ↗
31. C. H. Moelle and H. J. Fecht, Nanostruct. Mater., 1995, vol. 6(1-4), pp. 421-424.10.1016/0965-9773(95)00086-0 ↗
32. R. Perez, H. Jiang, E. Lavernia and C. Dogan, Metallurgical and Materials Transactions A, 1998, vol. 29, pp. 2469-2475.10.1007/s11661-998-0218-7 ↗
33. H. Natter, M. Schmelzer, M. S. Loffler, C. E. Krill, A. Fitch and R. Hempelmann, The Journal of Physical Chemistry B, 2000, vol. 104(11), pp. 2467-2476.10.1021/jp991622d ↗
34. H. Natter, M. Schmelzer, M.S. Loffler, and R. Hempelmann: Mater. Sci. Forum, 2000, vol. 343–346, p. 726.
35. R. J. Perez, H. G. Jiang and E. J. Lavernia, Nanostructured Materials, 1997, vol. 9(1-8), pp. 71-74.10.1016/S0965-9773(97)00021-4 ↗
36. X. Song, J. Zhang, L. Li, K. Yang and G. Liu, Acta Materialia, 2006, vol. 54(20), pp. 5541-5550.10.1016/j.actamat.2006.07.040 ↗
37. K. Omura, H. Miura, and H. Ogawa: Mater. Sci. Forum, 1999, vol. 318–320, p. 479.
38. J. Weissmuller, Nanostructured Materials, 1993, vol. 3, pp. 261-272.10.1016/0965-9773(93)90088-S ↗
39. P. Wynblatt and R. C. Ku, Surf. Sci., 1977, vol. 65, pp. 511-531.10.1016/0039-6028(77)90462-9 ↗
40. P. C. Millett, R. P. Selvam and A. Saxena, Acta Materialia, 2006, vol. 54, pp. 297-303.10.1016/j.actamat.2005.07.024 ↗
41. C. E. Krill, R. Klen, S. Janes and R. Birringer, Mater. Sci. Forum, 1995, vol. 179-181, pp. 443.10.4028/www.scientific.net/MSF.179-181.443 ↗
42. K. A. Darling, R. N. Chan, P. Z. Wong, J. E. Semones, R. O. Scattergood and C. C. Koch, Scripta Materialia, 2008, vol. 59(5), pp. 530-533.10.1016/j.scriptamat.2008.04.045 ↗
43. A. Michels, C. E. Krill, H. Ehrhardt, R. Birringer and D. T. Wu, Acta Materialia, 1999, vol. 47(7), pp. 2143-2152.10.1016/S1359-6454(99)00079-8 ↗
44. X. Zhang, N. Q. Vo, P. Bellon and R. S. Averback, Acta Materialia, 2011, vol. 59, pp. 5332-5341.10.1016/j.actamat.2011.05.009 ↗
45. N. Q. Vo, S. W. Chee, D. Schwen, X. Zhang, P. Bellon and R. S. Averback, Scripta Materialia, 2010, vol. 63, pp. 425-432.
46. T. Frolov, K. A. Darling, L. J. Kecskes and Y. Mishin, Acta Materialia, 2012, vol. 60(5), pp. 2158-2168.10.1016/j.actamat.2012.01.011 ↗
47. S. Trapp, C.T. Limbach, U. Gonser, S.J. Campbell, and H. Gleiter: Phys. Rev. Lett., 1995, vol. 75(20), p. 3760.10.1103/PhysRevLett.75.3760 ↗
48. A. Hernando, A. Cebollada, J.L. Menendez, and F. Briones, Electronic Transport in Nanocrystalline Iron: A Low T Magnetoresistance Effect, vol. 262. Elsevier, San Diego, CA, 2003, p. 1.
49. G. E. Fougere, J. R. Weertman and R. W. Siegel, Nanostructured Materials, 1995, vol. 5(2), pp. 127-134.10.1016/0965-9773(95)00021-6 ↗
50. D. Segers, S. Van Petegem, J. F. Löffler, H. Van Swygenhoven, W. Wagner and C. Dauwe, Nanostructured Materials, 1999, vol. 12(5-8), pp. 1059-1062.10.1016/S0965-9773(99)00299-8 ↗
51. A. A. Karimpoor, U. Erb, K. T. Aust and G. Palumbo, Scripta Materialia, 2003, vol. 49(7), pp. 651-656.10.1016/S1359-6462(03)00397-X ↗
52. T. R. Malow and C. C. Koch, Acta Materialia, 1998, vol. 46(18), pp. 6459-6473.10.1016/S1359-6454(98)00294-8 ↗
53. T. Malow and C. Koch, Metallurgical and Materials Transactions A, 1998, vol. 29, pp. 2285-2295.10.1007/s11661-998-0106-1 ↗
54. A. S. Khan, H. Zhang and L. Takacs, International Journal of Plasticity, 2000, vol. 16(12), pp. 1459-1476.10.1016/S0749-6419(00)00023-1 ↗
55. B. Chen, D. Penwell, M.B. Kruger, A.F. Yue, and B. Fultz: J. Appl. Phys., 2001, vol. 89(9), p. 4794.10.1063/1.1357780 ↗
56. H. Fecht, E. Hellstern, Z. Fu and W. Johnson, Metall. Trans. A, 1990, vol. 21, pp. 2333-2337.10.1007/BF02646980 ↗
57. L. Daróczi, D. L. Beke, G. Posgay, G. F. Zhou and H. Bakker, Nanostructured Materials, 1993, vol. 2(5), pp. 515-525.10.1016/0965-9773(93)90169-C ↗
58. P. Sinha and G.S. Collins: Hyperfine Interact., 1994, vol. 92(1), pp. 949–53.10.1007/BF02065717 ↗
59. E. Bonetti, L. Del Bianco, D. Fiorani, D. Rinaldi, R. Caciuffo, and A. Hernando: Phys. Rev. Lett., 1999, vol. 83(14), p. 2829.10.1103/PhysRevLett.83.2829 ↗
60. E. Bonetti, G. Scipione, G. Valdrè, S. Enzo, R. Frattini and P. P. Macrì, Journal of Materials Science, 1995, vol. 30(9), pp. 2220-2226.10.1007/BF01184564 ↗
61. T. R. Malow, C. C. Koch, P. Q. Miraglia and K. L. Murty, Materials Science and Engineering A, 1998, vol. 252(1), pp. 36-43.10.1016/S0921-5093(98)00661-3 ↗
62. S. Szabó, D. L. Beke, L. Harasztosi, L. Daróczi, G. Posgay and M. Kis-Varga, Nanostructured Materials, 1997, vol. 9(1-8), pp. 527-530.10.1016/S0965-9773(97)00116-5 ↗
63. O. Elkedim, H.S. Cao, C. Meunier, and E. Gaffet: Mater. Sci. Forum, 1998, vol. 269–272, pp. 843–848.10.4028/www.scientific.net/MSF.269-272.843 ↗
64. O. Elkedim, H.S. Cao, and P. Fluzin: Mater. Sci. Forum, 1999, vol. 312–314, p. 63510.4028/www.scientific.net/MSF.312-314.635 ↗
65. H. H. Tian and M. Atzmon, Acta Materialia, 1999, vol. 47(4), pp. 1255-1261.10.1016/S1359-6454(99)00002-6 ↗
66. E. Sobczak, Y. Swilem, N. N. Dorozhkin, R. Nietubyc, P. Dluzewski and A. Slawska-Waniewska, Journal of Alloys and Compounds, 2001, vol. 328(1-2), pp. 57-63.10.1016/S0925-8388(01)01347-0 ↗
67. S. Cheng, E. Ma, Y. M. Wang, L. J. Kecskes, K. M. Youssef, C. C. Koch, U. P. Trociewitz and K. Han, Acta Materialia, 2005, vol. 53(5), pp. 1521-1533.10.1016/j.actamat.2004.12.005 ↗
68. C.C. Koch: Rev. Adv. Mater. Sci., 2003, vol. 5, p. 91.
69. G. D. Hibbard, K. T. Aust and U. Erb, Materials Science and Engineering: A, 2006, vol. 433(1-2), pp. 195-202.10.1016/j.msea.2006.06.096 ↗
70. J.H. Seo, J.K. Kim, T.H. Tim, and Y.B. Park: Mater. Sci. Forum, 2005, vol. 475–479, p. 457.
71. K. M. Youssef, R. O. Scattergood, K. L. Murty, J. A. Horton and C. C. Koch, Applied Physics Letters, 2005, vol. 87(9), pp. 1-3.10.1063/1.2034122 ↗
72. K. M. Youssef, R. O. Scattergood, K. L. Murty and C. C. Koch, Scripta Materialia, 2006, vol. 54(2), pp. 251-256.10.1016/j.scriptamat.2005.09.028 ↗
73. J.R. Groza: in Nanostructured Materials: Processing, Properties, and Applications, C.C. Koch, ed., William Andrew Publication, Norwich, NY, 2007
74. K. M. Youssef, R. O. Scattergood, K. L. Murty and C. C. Koch, Applied Physics Letters, 2004, vol. 85(6), pp. 929-931.10.1063/1.1779342 ↗
75. O. Elkedim, H. S. Cao and D. Guay, Journal of Materials Processing Technology, 2002, vol. 121(2-3), pp. 383-389.10.1016/S0924-0136(01)01225-0 ↗
76. A. P. Zhilyaev, S. Lee, G. V. Nurislamova, R. Z. Valiev and T. G. Langdon, Scripta Materialia, 2001, vol. 44, pp. 2753-2758.10.1016/S1359-6462(01)00955-1 ↗
77. A. P. Zhilyaev, G. V. Nurislamova, B. K. Kim, M. D. Baro, J. A. Szpunar and T. G. Langdon, Acta Materialia, 2003, vol. 51, pp. 753-765.10.1016/S1359-6454(02)00466-4 ↗
78. M. Furukawa, Z. Horita, M. Nemoto and T. G. Langdon, J. Mater. Sci., 2001, vol. 36, pp. 2835-2843.10.1023/A:1017932417043 ↗
79. Y. Iwahashi, Z. Horita, M. Nemoto and T. G. Langdon, Acta Materialia, 1998, vol. 46, pp. 3317-3331.10.1016/S1359-6454(97)00494-1 ↗
80. Y. Iwahashi, J. T. Wang, Z. Horita, M. Nemoto and T. G. Langdon, Scripta Materialia, 1996, vol. 35, pp. 143-146.10.1016/1359-6462(96)00107-8 ↗
81. T. G. Langdon, M. Furukawa, M. Nemoto and Z. Horita, J. Miner. Met. Mater. Soc., 2000, vol. 52, pp. 30-33.10.1007/s11837-000-0128-7 ↗
82. M. Nemoto, Z. Horita, M. Furukawa and T. G. Langdon, Met. Mater. Intl., 1998, vol. 4, pp. 1181-1190.10.1007/BF03025992 ↗
83. R. W. Siegel, Materials Science Forum, 1997, vol. 235-238, pp. 851-860.
84. R. Gupta, R. K. S. Raman and C. C. Koch, Materials Science and Engineering: A, 2008, vol. 494(1-2), pp. 253-256.10.1016/j.msea.2008.04.019 ↗
85. M. Jain and T. Christman, Acta Metallurgica et Materialia, 1994, vol. 42(6), pp. 1901-1911.10.1016/0956-7151(94)90015-9 ↗
86. L. Fu, J. Yang, Q. Bi and W. Liu, Nanoscale Research Letters, 2008, vol. 4, pp. 11-16.10.1007/s11671-008-9195-4 ↗
87. G.-G. Lee and S.-D. Kim: Mater. Res. Symp. Proc., 2003, vol. 740, p. I3.22.
88. K. Tanaka, T. Fukuzaki, K. Nishio, and R. Tamura: Journal of Physics: 3rd International Symposium of Atomic Technology, 2009, vol. 191, p. 012025.10.1088/1742-6596/191/1/012025 ↗
89. M. Yue, P.L. Niu, J.X. Zhang, and D.T. Zhang: IEEE Trans. Magn., 2006, vol. 42(10), p. 2894.10.1109/TMAG.2006.879887 ↗
90. T. Saito, T. Takeuchi, and H. Kageyama: J. Mater. Res., 2004, vol. 19(9), p. 2730.10.1557/JMR.2004.0358 ↗
91. B. S. Murthy, M. K. Datta and S. K. Pabi, Sadhana, 2003, vol. 28(1-2), pp. 23-45.10.1007/BF02717124 ↗
92. G. C. Hadjipanayis and R. W. Siegel, Nanophase Materials - Synthesis, Properties, Applications. 1994: Dordrecht: Kluwer Academic.10.1007/978-94-011-1076-1 ↗
93. J. Loffler and J. Weissmuller: Phys. Rev. B, 1995, vol. 52(10), p. 7076.10.1103/PhysRevB.52.7076 ↗
94. H. N. Fraze, B. Fultz, J. L. Roberts and S. Spooner, Philosophical Magazine 2000, vol. B80, pp. 1545.
95. H. V. Swygenhoven, D. Farkas and A. Caro, Phys. Rev. Letters, 2000, vol. B62, pp. 831.
96. L. Del Bianco, A. Hernando, E. Bonetti and E. Navarro, Phys. Rev. Letters, 1997, vol. 81, pp. 4500.10.1103/PhysRevLett.81.4500 ↗
97. J. Balogh, L. Bujdoso, D. Kaptas, T. Kemeny, I. Vincze, S. Szabó and D. L. Beke, Phys. Rev., 2000, vol. B61, pp. 4109.10.1103/PhysRevB.61.4109 ↗
98. K. Lu and Y. H. Zhao, Nanostructured Materials, 1999, vol. 12, pp. 559.10.1016/S0965-9773(99)00183-X ↗
99. R. B. Intrui and Z. Szklarska-Smialowska, Corrosion, 1992, vol. 48, pp. 398.10.5006/1.3315951 ↗
100. S. Shriram, S. Mohan, N.G. Renganathan, and R. Venkatachalam: Trans. IMF, 2000, vol. 78(5), p. 194.10.1080/00202967.2000.11871337 ↗