Solidification parameters during the columnar-to-equiaxed transition in lead-tin alloys
Source abstract
Abstract
The columnar-to-equiaxed transition (CET) was studied in lead-tin alloys, which were solidified directionally from a chill face. The main parameters analyzed include the temperature gradients, solidification velocities of the liquidus and solidus fronts, and grain size. The transition was observed to occur when the temperature gradient in the melt decreased to values between −0.8 °C/cm and 1 °C/cm. In addition, there is an increase in the velocity of the liquidus front faster than the solidus front, which increases the size of the mushy zone. The size of the equiaxed grains increases with distance from the transition, an observation that was independent of alloy composition. The comparison with available analytical models and the observations indicate that the transition is the result of a competition between coarse columnar dendrites and finer equiaxed dendrites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. B. Chalmers: Principles of Solidification, Wiley, New York, NY, 1964, p. 255.
2. G.S. Cole and G.F. Boiling: Trans. TMS-AIME, 1967, vol. 239, p. 1824.
3. G.S. Cole and G.F. Boiling: Trans. TMS-AIME, 1965, vol. 233, p. 1568.
4. J.D. Hunt: Mater. Sci. Eng., 1984, vol. 65, p. 75.10.1016/0025-5416(84)90201-5 ↗
5. J.D. Hunt and S.C. Flood: Modeling of Welding and Casting II, 1983, p. 207.
6. J.D. Hunt and S.C. Flood: Modeling of Welding and Casting Processes, 1986, p. 607.
7. M.H. Burden and J.D. Hunt: Metall. Trans. A, 1975, vol. 6A, p. 240.10.1007/BF02673705 ↗
8. M.H. Burden and J.D. Hunt: J. Cryst. Growth, 1974, vol. 22, p. 99.10.1016/0022-0248(74)90126-2 ↗
9. M.H. Burden and J.D. Hunt: J. Cryst. Growth, 1974, vol. 22, p. 109.10.1016/0022-0248(74)90127-4 ↗
10. R.B. Mahapatra and F.B. Weinberg: Metall. Trans. B, 1987, vol. 18B, pp. 425–32.10.1007/BF02656163 ↗
11. I. Ziv and F. Weinberg: Metall. Trans. B, 1989, vol. 20B, pp. 731–34.10.1007/BF02655931 ↗
12. G.T. Lowe: Master’s Thesis, University of British Columbia, Vancouver, 1990.
13. W.J. Poole and F. Weinberg: Metall. Mater. Trans. A, 1998, vol. 29A, p. 855.10.1007/s11661-998-0276-x ↗
14. Kisakurek: J. Mater. Sci., 1984, vol. 19, p. 2289.10.1007/BF01058106 ↗
15. Ch. A. Gandin and M. Rappaz: Acta Metall. Mater., 1994, vol. 42, pp. 2223–46.
16. J. Lipton, M.E. Glicksman, and, W. Kurz: Mater. Sci. Eng., 1984, vol. 65, pp. 57–63.10.1016/0025-5416(84)90199-X ↗
17. C.Y. Wang and C. Beckermann: Metall. Mater. Trans., 1996, vol. 27A, pp. 2754–64.10.1007/BF02652369 ↗
18. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1996, vol 27A, pp. 2765–83.10.1007/BF02652370 ↗
19. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1996, vol 27A, pp. 2784–95.
20. C. Beckermann: JOM, 1997, vol. 49, pp. 13–17.10.1007/BF02914649 ↗
21. G. Kehl: Fundamentos de la Práctica Metalográfica, Aguilar, ed., Madrid, 1963, pp. 415–18.
22. H.E. Boyer and T.L. Gall: Metals Handbook, Desk edition, ASM, Metals Park, OH, 1984, pp. 35-18–35-19.
23. H. Biloni: “Relación Entre Las Subestructuras de Segregación y Las Estructuras de Fundición,” Comisión Nacional de Energía Atómica, Buenos Aires, Argentina, PMM/R-66, 1971, Capítulo IX.
24. J.R. Welty: Transferencia de Calor Aplicada a la Ingeniería, Limusa, S.A., México 1, D.F., México, 1978, pp. 41–179.
25. C.E. Schvezov: Modelización de Propiedades y Procesos en Materiales, Universidad Nacional de General San Martín-Comisión Nacional de Energía Atómica, Buenos Aires, Argentina, 1995, pp. 55–72.
26. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1986, pp. 16–17.
27. B.S. Bokshtein: Difusión en Metales, MIR, Moscú, URSS, 1980, p. 37.
28. L.M. Colucci-Vizenko, M.E. Glicksman, and R.N. Smith: JOM. 1994, pp. 51–55.10.1007/BF03222538 ↗
29. R.I.L. Guthrie: Engineering in Process Metallurgy, Oxford Science Publications, Oxford, United Kingdom, 1989, pp. 436–40.
30. A.E. Ares: Master’s Thesis, Universidad National de General San Martín-Comisión Nacional de Energía Atómica, Buenos Aires, Argentina, 1997, pp. 23–28.