Microstructural Features Controlling the Variability in Low-Cycle Fatigue Properties of Alloy Inconel 718DA at Intermediate Temperature
Source abstract
Abstract
The low-cycle fatigue behavior of two direct-aged versions of the nickel-based superalloy Inconel 718 (IN718DA) was examined in the low-strain amplitude regime at intermediate temperature. High variability in fatigue life was observed, and abnormally short lifetimes were systematically observed to be due to crack initiation at (sub)-surface non-metallic inclusions. However, crack initiation within (sub)-surface non-metallic inclusions did not necessarily lead to short fatigue life. The macro- to micro-mechanical mechanisms of deformation and damage have been examined by means of detailed microstructural characterization, tensile and fatigue mechanical tests, and in situ tensile testing. The initial stages of crack micro-propagation from cracked non-metallic particles into the surrounding metallic matrix occupies a large fraction of the fatigue life and requires extensive local plastic straining in the matrix adjacent to the cracked inclusions. Differences in microstructure that influence local plastic straining, i.e., the δ-phase content and the grain size, coupled with the presence of non-metallic inclusions at the high end of the size distribution contribute strongly to the fatigue life variability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. J. M. Oblak, D. F. Paulonis, and D. S. Duvall: Metall. Trans., 1974, vol. 5, pp. 143–153.10.1007/BF02644342 ↗
2. D. Fournier and A. Pineau: Metall. Trans. A, 1977, vol. 8, pp. 1095–1105.10.1007/BF02667395 ↗
3. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Acta Metall., 1988, vol. 36, pp. 847–864.10.1016/0001-6160(88)90139-3 ↗
4. R. E. Schafrik and R. Sprague: Adv. Mater. Process., 2004, vol. 162, pp. 27–30.
5. D.F. Paulonis and J.J. Schirra: in Superalloys 718, 625, 706 and Various Derivatives, 2001, pp. 13–23.10.7449/2001/Superalloys_2001_13_23 ↗
6. N. Späth, V. Zerrouki, P. Poubanne, and J.Y. Guedou: in Superalloys 718, 625, 706 and Various Derivatives, 2001, pp. 173–83.10.7449/2001/Superalloys_2001_173_183 ↗
7. Y. C. Fayman: Mater. Sci. Eng., 1987, vol. 92, pp. 159–171.10.1016/0025-5416(87)90166-2 ↗
8. D.D. Krueger: in Superalloy 718 Metallurgy and Application, 1989, pp. 279–96.10.7449/1989/Superalloys_1989_279_296 ↗
9. Snecma-SAFRAN Database for LCF Tests Performed under Strain-Controlled Conditions.
10. P.R. Bhowal and A.M. Wusatowska-sarnek: in Superalloys 718, 625, 706 and Derivatives, 2005, pp. 341–49.10.7449/2005/Superalloys_2005_341_349 ↗
11. T. Connolley, P. A. S. Reed, and M. J. Starinkm: Mater. Sci. Eng. A, 2003, vol. 340, pp. 139–154.10.1016/S0921-5093(02)00169-7 ↗
12. B. Pieraggi and J.F. Uginet: in Superalloys 718, 625, 706 and Various Derivatives, 1994, pp. 535–44.10.7449/1994/Superalloys_1994_535_544 ↗
13. T. Connolley, M.J. Starink, and P.A.S. Reed: in Superalloys 2000, 2000, pp. 435–44.10.7449/2000/Superalloys_2000_435_444 ↗
14. T. Denda, P. L. Bretz, and J. K. Tien: Int. J. Fatigue, 1992, vol. 14, p. 420.
15. F. Alexandre, R. Piques, S. Deyber, and A. Pineau: in ECF14, 2002.
16. F. Alexandre, S. Deyber, and A. Pineau: Scripta Mater., 2004, vol. 50, pp. 25–30.10.1016/j.scriptamat.2003.09.043 ↗
17. L. A. James: Eng. Fract. Mech., 1986, vol. 25, pp. 305–314.10.1016/0013-7944(86)90127-X ↗
18. D. D. Krueger, S. D. Antolovich, and R. H. Van Stone: Metall. Trans. A, 1987, vol. 18A, pp. 1431–1449.10.1007/BF02646657 ↗
19. M. Abikchi, T. Billot, J. Crepin, A. Longuet, T.F. Morgeneyer, and A. Pineau: in 13th International Conference on Fracture, 2013, pp. 1–11.
20. A. Devaux, L. Nazé, R. Molins, A. Pineau, A. Organista, J. Y. Guédou, J. F. Uginet, and P. Héritier: Mater. Sci. Eng. A, 2008, vol. 486, pp. 117–122.10.1016/j.msea.2007.08.046 ↗
21. J.W. Brooks and P.J. Bridges: in Superalloys 1988, 1988, pp. 33–42.10.1177/070674378803300832 ↗
22. J. He, S. Fukuyama, and K. Yokogawa: J. Mater. Sci. Technol., 1994, vol. 10, pp. 293–303.
23. A. Pineau and S. D. Antolovich: Eng. Fail. Anal., 2009, vol. 16, pp. 2668–2697.10.1016/j.engfailanal.2009.01.010 ↗
24. M. M. Shenoy, R. S. Kumar, and D. L. McDowell: Int. J. Fatigue, 2005, vol. 27, pp. 113–127.10.1016/j.ijfatigue.2004.06.008 ↗
25. J. Zhang, R. Prasannavenkatesan, M. M. Shenoy, and D. L. McDowell: Eng. Fract. Mech., 2009, vol. 76, pp. 315–334.10.1016/j.engfracmech.2008.10.011 ↗
26. A. Mitchell: in Superalloys 718, 625, 706 and Derivatives, 2005, pp. 299–310.10.7449/2005/Superalloys_2005_299_310 ↗
27. A. Mitchell and T. Wang: in Superalloys 718, 625, 706 and Various Derivatives, 2001, pp. 81–91.10.7449/2001/Superalloys_2001_81_90 ↗
28. L. A. James and W. J. Mills: Eng. Fract. Mech., 1985, vol. 22, pp. 797–817.10.1016/0013-7944(85)90109-2 ↗
29. S. Ponnelle, B. Brethes, and A. Pineau: in Superalloys 718, 625, 706 and Various Derivatives, 2001, pp. 307–19.
30. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Metall. Trans. A, 1988, vol. 19, pp. 453–465.10.1007/BF02649259 ↗
31. S. Azadian, L. Y. Wei, and R. Warren: Mater. Charact., 2004, vol. 53, pp. 7–16.10.1016/j.matchar.2004.07.004 ↗
32. J.-R. Vaunois, J. Cormier, P. Villechaise, A. Devaux, and B. Flageolet: in Superalloy 718 and Derivatives, 2010, pp. 199–213.10.7449/2010/Superalloys_2010_199_213 ↗
33. B. Max, B. Viguier, E. Andrieu, and J. M. Cloue: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5431–5441.10.1007/s11661-014-2508-6 ↗
34. D. L. Kohlstedt: J. Mater. Sci., 1973, vol. 8, pp. 777–786.10.1007/BF02397907 ↗
35. D. Dudzinski, A. Devillez, A. Moufki, D. Larrouquère, V. Zerrouki, and J. Vigneau: Int. J. Mach. Tools Manuf., 2004, vol. 44, pp. 439–456.10.1016/S0890-6955(03)00159-7 ↗
36. D. Ulutan and T. Ozel: Int. J. Mach. Tools Manuf., 2011, vol. 51, pp. 250–280.10.1016/j.ijmachtools.2010.11.003 ↗
37. S. M. Afazov, A. A. Becker, and T. H. Hyde: Int. J. Adv. Manuf. Technol., 2010, vol. 51, pp. 711–722.10.1007/s00170-010-2638-y ↗
38. P.R. Bhowal, D. Stolz, A.M. Wusatowska-Sarnek, and R. Montero: in Superalloys 2008, 2008, pp. 417–23.10.7449/2008/Superalloys_2008_417_423 ↗
39. J. K. Hong, N. K. Park, S. J. Kim, and C. Y. Kang: Mater. Sci. Forum, 2005, vol. 502, pp. 249–256.10.4028/www.scientific.net/MSF.502.249 ↗
40. P. S. Karamched and A. J. Wilkinson: Acta Mater., 2011, vol. 59, pp. 263–272.10.1016/j.actamat.2010.09.030 ↗
41. M. Nageswara Rao: Trans. Indian Inst. Met., 2010, vol. 63, pp. 363–367.10.1007/s12666-010-0048-3 ↗
42. M.J. Donachie and S.J. Donachie: SUPERALLOYS a Technical Guide, 2nd ed., ASM International, Materials Park, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
43. J. Warren and D. Y. Wei: Mater. Sci. Eng. A, 2006, vol. 428, pp. 106–115.10.1016/j.msea.2006.04.091 ↗
44. T. H. Sanders, R. E. Frishmuth, and G. T. Embley: Metall. Trans. A, 1981, vol. 12, pp. 1003–1010.10.1007/BF02643481 ↗