journal article·2012-07Open access

On the Mechanical Behavior of a New Single-Crystal Superalloy for Industrial Gas Turbine Applications

Atsushi Sato, Johan J. Moverare, Magnus Hasselqvist, Roger C. Reed

Abstract

The mechanical behavior of a new single-crystal nickel-based superalloy for industrial gas turbine (IGT) applications is studied under creep and out-of-phase (OP) thermomechanical fatigue (TMF) conditions. Neutron diffraction methods and thermodynamic modeling are used to quantify the variation of the gamma prime (γ′) strengthening phase around the γ′ solvus temperature; these aid the design of primary aging heat treatments to develop either uniform or bimodal microstructures of the γ′ phase. Under creep conditions in the temperature range 1023 K to 1123 K (750 °C to 850 °C), with stresses between 235 to 520 MPa, the creep performance is best with a finer and uniform γ′ microstructure. On the other hand, the OP TMF performance improves when the γ′ precipitate size is larger. Thus, the micromechanical degradation mechanisms occurring during creep and TMF are distinct. During TMF, localized shear banding occurs with the γ′ phase penetrated by dislocations; however, during creep, the dislocation activity is restricted to the matrix phase. The factors controlling TMF resistance are rationalized.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1994, vol. 42, pp. 1859–74.10.1016/0956-7151(94)90011-6 ↗
2. F.R.N. Nabarro and H.L. deVilliers: The Physics of Creep, Taylor & Francis, London, 1995.
3. A.G. Evans, M.Y. He, A. Suzuki, M. Gigliotti, B. Hazel, and T.M. Pollock: Acta Mater., 2009, vol. 57, pp. 2969–83.10.1016/j.actamat.2009.02.047 ↗
4. F. Pyczak, B. Devrient, F.C. Neuner, and H. Mughrabi: Acta Mater., 2005, vol. 53, pp. 3879–91.10.1016/j.actamat.2005.04.041 ↗
5. A. Sato, Y.L. Chiu, and R.C. Reed: Acta Mater., 2011, vol. 59, pp. 225–40.10.1016/j.actamat.2010.09.027 ↗
6. M. Hasselqvist, R.C. Reed, J.J. Moverare, and A. Sato: 1st Int. Symp. on Eurosuperalloys, 2010, unpublished research.
7. Proc. Superalloys 2008, 11th Int. Symp. for Superalloys, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, and M.G. Fahrmann, and E.S. Huron, eds., TMS, Warrendale, PA, 2008.
8. H. Mughrabi, S. Kraft, and M. Ott: Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 335–44.10.7449/1996/Superalloys_1996_335_344 ↗
9. J.X. Zhang, H. Harada, Y. Ro, Y. Koizumi, and T. Kobayashi: Acta Mater., 2008, vol. 56, pp. 2975–87.10.1016/j.actamat.2008.02.035 ↗
10. R.C. Reed: The Superalloys—Fundamentals and Applications, Cambridge University Press, Cambridge, United Kingdom, 2006.10.1017/CBO9780511541285 ↗
11. Thermotech Ni-Data Version 6, Thermotech Ltd./Sente Software, Surrey, United Kingdom.
12. R.A. Stevens and P.E.J. Flewitt: Acta Metall., 1981, vol. 29, pp. 867–82.10.1016/0001-6160(81)90129-2 ↗
13. I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35–50.10.1016/0022-3697(61)90054-3 ↗
14. C. Wagner: Z. Elektrochem, 1961, vol. 65, pp. 581–91.
15. A.J. Ardell and R.B. Nicholson: Acta Metall., 1966, vol. 14, pp. 1295–1309.10.1016/0001-6160(66)90247-1 ↗
16. A.J. Ardell: Acta Metall., 1968, vol. 16, pp. 511–16.10.1016/0001-6160(68)90125-9 ↗
17. H.A. Calderon, P.W. Voorhees, J.L. Murray, and G. Kostorz: Acta Metall. Mater., 1994, vol. 42, pp. 991–1000.10.1016/0956-7151(94)90293-3 ↗
18. X. Li, N. Saunders, and A.P. Miodownik: Metall. Mater. Trans. A, 2002, vol. 33A pp. 3367–73.10.1007/s11661-002-0325-9 ↗
19. W.J. Boettinger, U.R. Kattner, S.R. Coriell, Y.A. Chang, and B.A. Mueller: in Modeling of Casting, Welding and Advanced Solidification Processes VII, M. Cross and J. Campbell, eds., TMS, Warrendale, PA, 1995, pp. 649–56.
20. M.S.A. Karunaratne and R.C. Reed: Acta Mater., 2003, vol. 51, pp. 2905–19.10.1016/S1359-6454(03)00105-8 ↗
21. J.J. Moverare, S. Johansson, and R.C. Reed: Acta Mater., 2009, vol. 57, pp. 2266–76.10.1016/j.actamat.2009.01.027 ↗
22. J.J. Moverare and S. Johansson: Mater. Sci. Eng., 2010, vol. 527A, pp. 553–58.10.1016/j.msea.2009.08.023 ↗
23. J.J. Moverare: University of Linkorping, Sweden, 2012, unpublished research.
24. J.X. Zhang, Y. Ro, H. Zhou, and H. Harada: Scripta Mater., 2006, vol. 54, pp. 655–60.10.1016/j.scriptamat.2005.10.030 ↗
25. M.A. Meyers, O. Vohringer, and V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025–39.10.1016/S1359-6454(01)00300-7 ↗
26. A.J. Ardell: Metall. Trans. A, 1985, vol. 16A, pp. 2131–65.10.1007/BF02670416 ↗
27. K. Harris and G.L. Erickson: Patent No. US4643782, Feb. 17, 1987.
28. P. Caron, P.J. Henderson, T. Khan, and M. McLean: Scripta Metall., 1986, vol. 20, pp. 875–80.10.1016/0036-9748(86)90458-8 ↗