journal article·2006-10

Fracture toughness of the lean duplex stainless steel LDX 2101

Henrik Sieurin, Rolf Sandström, Elin M. Westin

Publisher page

Abstract

Fracture toughness testing was performed on the recently developed lean duplex stainless steel LDX 2101 (EN 1.4162, UNS S32101). The results were evaluated by master curve analysis, including deriving a reference temperature. The master curve approach, originally developed for ferritic steels, has been used successfully. The reference temperature corresponds to a fracture toughness of 100 MPa√m, which characterizes the onset of cleavage cracking at elastic or elastic-plastic instabilities. The reference temperature, T 0, was −112 °C and −92 °C for the base and weld materials, respectively. In addition, the fracture toughness is compared with impact toughness results. Complementary crack tip opening displacements (CTODs) have also been calculated. The toughness properties found in traditional duplex stainless steels (DSS) are generally good. The current study verifies a high fracture toughness for both base and weld materials and for the low alloyed grade LDX 2101. Even though the fracture toughness was somewhat lower than for duplex stainless steel 2205, it is still sufficiently high for most low-temperature applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. W.B. Hutchinson, K. Ushioda, and G. Runnsjö: Mater. Sci. Technol, 1985, vol. 1, pp. 728–31.10.1179/mst.1985.1.9.728 ↗
2. P. Johansson and M. Liljas: Proc. 4th European Stainless Steel Science and Market Congress, Association Technique de la Siderurgie Francaise (ATS), Paris, France, 2002, pp. 1–26.
3. K. Wallin: Int. J. Mater. Prod. Technol, 1990, vol. 14, pp. 342–54.10.1504/IJMPT.1999.036276 ↗
4. ASTM E 1921–97: Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, vol. 03.01.
5. EN 10002-1: “E, Metallic Materials-Tensile Testing-Part 1: Method of Test at Ambient Temperature,” approved by CEN on May 12, 2001, European Committee for Standardization, Brussels, 2001.
6. EN 10045-1: “E, Charpy Impact Test on Metallic Materials-Part 1: Test Method (V and U Notches),” accepted by CEN on November 27, 1989, European Committee for Standardization, Brussels, 1990.
7. K. Wallin: Statistical Test Data Analysis, Background Document 4, European Research 5th Framework, EcoPress, 2003, pp. 1–26
8. H. Sieurin and R. Sandström: Eng. Fract. Mech, 2006, vol. 73, pp. 377–90.10.1016/j.engfracmech.2005.03.009 ↗
9. ASTM E 1820-99a: Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, vol. 03.01.
10. C.S. Wiesner: Proc. Duplex Stainless Steels ′97, 5th World Conf., Maastricht, The Netherlands, 1997, KCI-Publishing BV, Maastricht, The Netherlands, 1997, vol. 2, pp. 979–90.
11. H.G. Pisarski and K. Wallin: Eng. Fract. Mech, 2000, vol. 67, pp. 613–24.10.1016/S0013-7944(00)00076-X ↗
12. K. Wallin: Report from Working Group 4013/89, Jernkontorets Forskning, Stockholm, 1990.
13. K.S. Chan: Metall. Trans. A, 1989, vol. 20A, pp. 155–64.10.1007/BF02647502 ↗
14. A.S. Nilsson: Corrosion and Metals Research Institute Report, available at Kimab.com, IM-2551, Feb. 1992.