Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition
Source abstract
Abstract
Al-5 wt pct Si-based alloys with Na additions (19 and 160 ppm) have been produced by controlled sand casting and melt spinning. Entrained droplet technique and differential scanning calorimetry were employed to investigate the nucleation behavior of eutectic Si. High-resolution transmission electron microscopy and atom probe tomography were used to investigate the distribution of Na atoms within eutectic Si and at the interfaces between eutectic Si and eutectic Al. It was found that (i) only 19 ppm Na addition results into a high undercooling (49 K (49 °C)) of the entrained eutectic droplet. However, further increasing Na addition up to 160 ppm exerts no positive effect on the nucleation of eutectic Si, instead a decreased undercooling (29 K (29 °C)) was observed. (ii) Na addition suppresses the growth of eutectic Si due to the Na segregation at the interface between eutectic Si and eutectic Al, and (iii) Na addition promotes significant multiple Si twins, which can be attributed to the proposed adsorption of Na atoms at the intersection of Si twins and along the 〈112〉Si growth direction of Si. The present investigation demonstrates, for the first time, a direct observation on the distribution of Na atoms within eutectic Si and thereby provides strong experimental supports to the well-accepted impurity-induced twinning growth mechanism and poisoning of the twin plane re-entrant edge growth mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Advanced Materials Characterization Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A. Pacz: US Patent No. 1387900, 1921.
2. Shu-Zu Lu and A. Hellawell: Metall. Trans. A, 1987, vol. 18, pp.1721-1733.10.1007/BF02646204 ↗
3. R.S. Wanger: Acta Metall., 1960, vol. 8, p. 57.10.1016/0001-6160(60)90145-0 ↗
4. R.D. Hamilton and R.G. Seidensticker: J. Appl. Phys., 1960, vol. 31, p. 1165.10.1063/1.1735796 ↗
5. M.G. Day and A. Hellawell: Proc. R Soc. Lond A, 1968, vol. 305, pp. 473-491.10.1098/rspa.1968.0128 ↗
6. J.H. Li, M. Zarif, M. Albu, B. McKay, F. Hofer and P. Schumacher: Acta Mater., 2014, vol. 72, pp. 80-98.10.1016/j.actamat.2014.03.030 ↗
7. J.H. Li, M. Zarif, G. Dehm and P.Schumacher: PHIL. Mag., 2012, vol. 92, pp. 3789-3805.10.1080/14786435.2012.687840 ↗
8. M. Zarif, B. McKay and P. Schumacher: Metall. Mater. Trans. A., 2011, vol. 42, pp. 1684-1691.10.1007/s11661-010-0553-3 ↗
9. K. Nogita, H. Yasuda, K. Yoshida, K. Uesugi, A. Takeuchi, Y. Suzuki and A.K.Dahle: Scripta Mater., 2006, vol. 55, pp. 787-790.10.1016/j.scriptamat.2006.07.029 ↗
10. K. Nogita, H. Yasuda, M. Yoshiya, S.D. McDonald, K. Uesugi, A. Takeuchi and Y. Suzuki: J. Alloys Compd., 2010, vol. 489, pp. 415-420.10.1016/j.jallcom.2009.09.138 ↗
11. M. Timpel, N. Wanderka, R. Schlesiger, T. Yamamoto, N. Lazarev, D. Isheim, G. Schmitz, S. Matsumura and J. Banhart: Acta Mater., 2012, vol. 60, pp. 3920-3928.10.1016/j.actamat.2012.03.031 ↗
12. M. Timpel, N. Wanderka, R. Schlesiger, T. Yamamoto, D. Isheim, G. Schmitz, S. Matsumura and J. Banhart. Ultramicroscopy, 2013, vol. 132, pp. 216-221.10.1016/j.ultramic.2012.10.006 ↗
13. J. Barrirero, M. Engstler, N. Ghafoor, N. de Jonge, M. Odén and F. Mücklich:. Alloys Compd., 2014, vol. 611, pp. 410-421.10.1016/j.jallcom.2014.05.121 ↗
14. M. Faraji and L. Katgerman: Micron., 2010, vol. 41, pp. 554-559.10.1016/j.micron.2010.04.011 ↗
15. Q.Y. Liu, Q.C. Li and J.R. Zhang: Scripta Metall., 1988, vol. 22, pp. 789-791.10.1016/S0036-9748(88)80050-4 ↗
16. K. Kobayashi, P.H. Shingu and R. Ozaki: J. Materials Science., 1975, vol. 10, pp. 290-299.10.1007/BF00540353 ↗
17. Y.H. Cho, H.C. Lee, K.H. Oh and A.K. Dahle: Metall. Mater. Trans. A., 2008, vol. 10, p.2435.10.1007/s11661-008-9580-8 ↗
18. P.B. Crosley and L.F. Mondolfo: Modern Castings, 1966, vol. 49, p.63.
19. C.R. Ho and B. Cantor: J. Materials Science, 1995, vol. 30, pp. 1912-1920.10.1007/BF00353013 ↗
20. C.R. Ho and B. Cantor: Acta Metall. Mater., 1995, vol. 43, pp.3231-3246.10.1016/0956-7151(94)00480-6 ↗
21. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olson, T.F. Kelly and B. Gorman: Ultramicroscopy, 2007, vol.107, pp.131-139.10.1016/j.ultramic.2006.06.008 ↗
22. T.F. Kelly and M.K. Miller: Review of Scientific Instruments, 2007, vol. 78, p. 031101.10.1063/1.2709758 ↗
23. M.K. Miller: Atom Probe Tomography: Analysis at the Atomic Level. New York, Kluwer Academic/Plenum, 2000.10.1007/978-1-4615-4281-0 ↗
24. C. Oberdorfer, S.M. Eich and G. Schmitz: Ultramicroscopy, 2013, vol. 128, pp. 55-67.10.1016/j.ultramic.2013.01.005 ↗
25. J.H. Li, M. Albu, F. Hofer and P.Schumacher: Acta Mater., 2015, vol. 83, pp. 187-202.10.1016/j.actamat.2014.09.040 ↗
26. L. Clapham and R.W. Smith: in Partitioning of Strontium Modifier to Individual Phases in Al-Si Eutectic, J. Beech and H. Jones, eds., Proc. 4th Decenn. Int. Conf. Solidif. Process, Sheffield, 1987.
27. M.E. Schlesinger: Chem. Rev., 2002, vol. 102, pp. 4267-4301.10.1021/cr000039m ↗
28. DA Porter, KE Easterling, MY Sherif (2009) Phase Transformation in Metals and Alloys, 3rd ed., CRC Press, Boca Raton, FL.
29. E.B. Smith: Basic Chemical Thermodynamics, 4th ed., Oxford University Press, New York, 1990.