journal article·2002-07

Sintering densification and microstructural evolution of injection molding grade 17-4 PH stainless steel powder

Yunxin Wu, Debby Blaine, Connie Schlaefer, Brian Marx, Randall M. German

Publisher page

Abstract

Densification behavior is investigated by means of dilatometry for powder-injection-molded (PIM) and die-compacted 17-4 PH stainless steel during sintering in pure H2 and H2 + N2. The corresponding microstructural evolution is examined by quenching in a vertical furnace at various stages of sintering. The results show that in comparison with pure H2, the H2 + N2 atmosphere retards densification and produces a lower shrinkage rate above 1220 °C. The X-ray diffraction (XRD) analysis reveals the presence of a stabilized austenitic microstructure during H2 + N2 sintering. In pure H2, however, δ ferrite forms and grows above 1220 °C, producing a higher shrinkage rate. In terms of the atomic diffusivity, δ-ferrite formation is beneficial to pore shrinkage and densification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Injection Molding Process and Properties · Powder Metallurgy Techniques and Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. R.M. German and A. Bose: Injection Molding of Metals and Ceramics, Metal Powder Industries Federation, Princeton, NJ, 1997, pp. 11–24.
2. J.R. Davis: Stainless Steels, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 13–38 and 104–05.
3. H. Zhang and R.M. German: Proc. 1992 Powder Injection Molding Symp., P.H. Booker, J. Gaspervich, and R.M. German, eds., Metal Powder Industries Federation, Princeton, NJ, 1992, pp. 219–27.
4. S. Banerjee: Proc. 1992 Powder Injection Molding Symp., P.H. Booker, J. Gaspervich, and R.M. German, eds., Metal Powder Industries Federation, Princeton, NJ, 1992, pp. 181–92.
5. R.M. German and D. Kubish: Int. J. Powder Metall., 1993, vol. 29, pp. 47–62.
6. T. Baba, H. Miura, T. Honda, and Y. Tokuyama: in Advances in Powder Metallurgy and Particulate Materials, M. Philips and J. Porter, eds., Metal Powder Industries Federation, Princeton, NJ, 1995, vol. 2, pp. 6.271–6.278.
7. J.J. Valencia, T.J. McCabe, and H. Dong: in Advances in Powder Metallurgy and Particulate Materials, M. Philips and J. Porter, eds., Metal Powder Industries Federation, Princeton, NJ, 1995, vol. 2, pp. 6.205–6.212.
8. H. Kyogoku, S. Komatsu, H. Nakayama, H. Jinushi, and K. Shinohara: in Advances in Powder Metallurgy and Particulate Materials, R.A. McKotch and R. Webb, eds., Metal Powder Industries Federation, Princeton, NJ, 1997, vol. 3, pp. 18.135–18.144.
9. J.J. Valencia and J.R. Spirko: in Advanced Particulate Materials and Processes, F.H. Froes and J. Hebeisen, eds., Metal Powder Industries Federation, Princeton, NJ, 1997, pp. 411–19.
10. R.M. German: Mater. Manuf. Processing, 1997, vol. 12, pp. 713–35.10.1080/10426919708935177 ↗
11. J.W. Newkirk, J.A. Sago, and G.M. Brasel: in Processing and Fabrication of Advanced Materials, VII, T.S. Srivatsan and K.A. Khor, eds., TMS, Warrendale, PA, 1998, pp. 213–23.
12. K.A. Green: in Advances in Powder Metallurgy and Particulate Materials, J.J. Oakes and J.H. Reinshagen, eds., Metal Powder Industries Federation, Princeton, NJ, 1998, vol. 2, pp. 5.119–5.130.
13. E.A. Olevsky: Mater. Sci. Eng., 1998, vol. 23R, pp. 41–100.10.1016/S0927-796X(98)00009-6 ↗
14. Z.Y. Liu, N.H. Loh, K.A. Khor, and S.B. Tor: Scripta Mater., 2001, vol. 44, pp. 1131–37.10.1016/S1359-6462(01)00664-9 ↗
15. J.C. LaSalle and M. Zedalis: JOM, 1999, vol. 51 (7), pp. 38–39.10.1007/s11837-999-0109-4 ↗
16. W.F. Smith: Principles of Materials Science and Engineering, 2nd ed., McGraw-Hill Publishing Company, New York, NY, 1990, pp. 72–81 and 145–76.
17. R.M. German: Sintering Theory and Practice, John Wiley & Sons Inc., New York, NY, 1996, pp. 68–137, 214–18, 421–47, and 524–34.
18. J. Rawers, F. Croydon, R. Krabbe, and N. Duttlinger: Int. J. Powder Metall., 1996, vol. 32, pp. 319–22.
19. D.L. Johnson: J. Am. Ceram. Soc., 1990, vol. 73, pp. 2576–78.10.1111/j.1151-2916.1990.tb07642.x ↗
20. Jon Peltier: Honeywell Laboratories, Morristown, NJ, unpublished research, 2001.
21. I. Kaur, W. Gust, and L. Kozma: Handbook of Grain and Interphase Boundary Diffusion Data, Ziegler Press, Stuttgart, Germany, 1989, pp. 536–79.
22. T. Marcu Puscas, A. Molinari, J. Kazior, T. Pieczonka, and M. Nykiel: Powder Metall., vol. 44 (1), 2001, pp. 48–52.10.1179/003258901666167 ↗
23. M.A. Phillips, E.L. Streicher, M. Renowden, R.M. German, and J.M. Friedt: Proc. 1992 Powder Injection Molding Symp., P.H. Booker, J. Gaspervich, and R.M. German, eds., Metal Powder Industries Federation, Princeton, NJ, 1992, pp. 371–84.