journal article·2007-01

Solidification Behavior and the Evolution of Phase in Laser Rapid Forming of Graded Ti6Al4V-Rene88DT Alloy

X. Lin, T.M. Yue, H.O. Yang, W.D. Huang

Publisher page

Abstract

The graded material of Ti6Al4V-Rene88DT superalloy, which has shown the potential to be applied in aeroengines, was fabricated from prealloyed metal powders using the technique of laser rapid forming (LRF). A compositional gradient, from 100 pct Ti6Al4V to Ti6Al4V-38 pct Rene88DT, was achieved within a thickness of laser deposit of 54 mm. The solidification behavior and the phase evolution of the compositionally graded material were studied. The results of the X-ray diffraction (XRD) analysis together with the metallographic study showed that a series of phase evolutions, α + β → α + β + Ti2Ni → β + Ti2Ni, along the compositional gradient have occurred. The hardness value of the graded material was measured along the compositional gradient, and the results were explained in terms of the various phases present. The condition for columnar-to-equiaxed transition observed in the graded material was explained, based on Hunt’s criterion. Finally, the morphology of β + Ti2Ni anomalous eutectic is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Suresh S., Mortensen A. (1998) Fundamentals of Functionally Graded Materials. The Institute of Materials, IOM Communications Ltd., London
2. Keicher D.M., Smugeresky J.E., Romero J.A., Griffith M.L., Harwell L.D. (1997) Proc. SPIE 2993:91–9710.1117/12.270018 ↗
3. G.K. Lewis, R.B. Nemec, J.O. Milewski, D.L. Thoma, M.R. Barbe, and D.A. Cremers: Proc. ICALEO’94, Laser Institute of America, Orlando, FL, 1994, pp. 17–2610.2351/1.5058786 ↗
4. Gaumann M., Henry S., Cleton F., Wagniere J.-D., Kurz W. (1999) Mater Sci Eng A A271:232–4110.1016/S0921-5093(99)00202-6 ↗
5. Li Y.M., Yang H.O., Lin X., Huang W.D., Li J.G., Zhou Y.H. (2003) Mater Sci Eng A A360:18–25
6. Mazumder J., Schifferer A., Choi J. (1999) Mater Res Innovat 3:118–3110.1007/s100190050137 ↗
7. Abboud J.H., Rawlings R.D., West D.R.F. (1995) J Mater Sci 30:5931–3810.1007/BF01151508 ↗
8. Seefeld T., Theiler C., Schubert E., Sepold G. (1999) Mater Sci Forum 308–311:459–6610.4028/www.scientific.net/MSF.308-311.459 ↗
9. Pei Y.T., De Hosson J.T.M. (2000) Acta Mater 48:2617–2410.1016/S1359-6454(00)00065-3 ↗
10. Brooks J.A., Robino C.V., Griffith M.L., Headley T.J., Yang N.C.Y., Goods S.H., Susan D.F., Puskar J.D. (2001) SAND2001–8186. Sandia National Laboratories, Albuquerque, NM
11. Lewis G.K., Schlienger E. (2000) Mater Design 21:417–2310.1016/S0261-3069(99)00078-3 ↗
12. F.J. Kahlen, A. Von Klitzing, and A. Kar: Proc. ICALEO’99, Laser Institute of America, San Diego, CA, Nov. 1999, pp. F129-F13710.2351/1.5059265 ↗
13. Lin X., Yue T.M., Yang H.O., Huang W.D. (2005) Mater Sci Eng A 391:325–3610.1016/j.msea.2004.08.072 ↗
14. Lin X., Yue T.M. (2005) Mater Sci Eng A 402:294–30610.1016/j.msea.2005.05.024 ↗
15. Collins P.C., Banerjee R., Banerjee S., Fraser H.L. (2003) Mater Sci Eng A 352:118–2810.1016/S0921-5093(02)00909-7 ↗
16. Banerjee R., Collins P.C., Bhattacharyya D., Banerjee S., Fraser H.L. (2003) Acta Mater 51:3277–9210.1016/S1359-6454(03)00158-7 ↗
17. Banerjee R., Bhattacharyya D., Collins P.C., Viswanathan G.B., Fraser H.L. (2004) Acta Mater 52:377–8510.1016/j.actamat.2003.09.038 ↗
18. X. Lin, Yue T.M., Yang H.O., Huang W.D. (2006) Acta Mater 54:1901–1510.1016/j.actamat.2005.12.019 ↗
19. N. Saunders: in Titanium ‘95: Science and Technology, P.A. Blenkinsop, W.J. Evans, and H.N. Flower, eds., Institute of Materials, London, 1996, pp. 2167–76
20. Gupta K.P. (1999) J Phase Equilibria 20:65–7210.1361/105497199770335965 ↗
21. W. Kurz and Fisher D.J.: Fundamentals of Solidification, 3rd ed., Trans Tech Publications, Aedermannsdorf, Switzerland, (1992)
22. Gäumann M., Trivedi R., Kurz W. (1997) Mater Sci Eng A 226–228:763–6910.1016/S0921-5093(97)80081-0 ↗
23. Kurz W., Giovanola B., Trivedi R. (1986) Acta Metall 34:823–3010.1016/0001-6160(86)90056-8 ↗
24. Lipton J., Kurz W., Trivedi R. (1987) Acta Metall 35:957–6410.1016/0001-6160(87)90174-X ↗
25. Franti G.W., Williams J.C., Aaronson H.I. (1978) Metall Trans A 9A:1641–4910.1007/BF02661947 ↗
26. Lee H.J., Aaronson H.I. (1988) Acta Metall 36:1141–5310.1016/0001-6160(88)90167-8 ↗
27. Bhaskaran T.A., Krishnan R.V., Ranganathan S. (1995) Metall Mater Trans A 26A:1367–7710.1007/BF02647587 ↗
28. Trivedi R., Magnin P., Kurz W. (1987) Acta Metall 35:971–8010.1016/0001-6160(87)90176-3 ↗
29. Wei B., Herlach D.M., Feuerbacher B., Sommer F. (1993) Acta Metall Mater 41:1801–0910.1016/0956-7151(93)90200-C ↗
30. Li M.J., Nagashio K., Ishikawa T., Yoda S., Kuribayashi K. (2005) Acta Mater 53:731–4110.1016/j.actamat.2004.10.029 ↗
31. Hogan L.M. (1964) J Aust Inst Met 9:228
32. Kattamis T.Z., Flemings M.C. (1970) Metall Trans 1:1449–5110.1007/BF02900268 ↗
33. Jones B.L. (1971) Metall Trans 2:2950–5110.1007/BF02663330 ↗