journal article·2010-05

Loading Rate Effect on Nanohardness of Soda-Lime-Silica Glass

Riya Chakraborty, Arjun Dey, Anoop Kumar Mukhopadhyay

Publisher page

Abstract

To understand how hardness, the key design parameter for applications of brittle solids such as glass concerning contact deformation, is affected by loading rate variation, nanoindentation with a Berkovich tip was used to measure the nanohardness of a 330-μm-thick soda-lime-silica glass as a function of loading rate (1 to 1000 mN·s−1). The results showed for the very first time that, with variations in the loading rate, there was a 6 to 9 pct increase in the nanohardness of glass up to a threshold loading rate (TLR), whereafter it did not appreciably increase with further increase in loading rate. Further, the nanohardness data showed an indentation size effect (ISE) that obeyed the Meyer’s law. These observations were explained in terms of a strong shear stress component developed just beneath the nanoindenter and the related shear-induced deformation processes at local microstructural scale weak links. The significant or insignificant presence of shear-induced serrations in load depth plots and corresponding scanning electron microscopic evidence of a strong or mild presence of shear deformation bands in and around the nanoindentation cavity supported such a rationalization. Finally, a qualitative picture was developed for different deformation processes induced at various loading rates in glass.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. R.F. Cook and G.M. Pharr: J. Am. Ceram. Soc., 1990, vol. 73, pp. 787–817.10.1111/j.1151-2916.1990.tb05119.x ↗
2. B.R. Lawn: J. Am. Ceram. Soc., 1998, vol. 81, pp. 1977–94.10.1111/j.1151-2916.1998.tb02580.x ↗
3. T. Burgess and M. Ferry: Mater. Today, 2009, vol. 12, pp. 24–32.10.1016/S1369-7021(09)70039-2 ↗
4. N.K. Mukhopadhyay and P. Paufler: Int. Mater. Rev., 2006, vol. 51, pp. 209–45.10.1179/174328006X102475 ↗
5. K.W. Peter: J. Non-Cryst. Solids, 1970, vol. 5, pp. 103–15.10.1016/0022-3093(70)90188-2 ↗
6. A. Arora, D.B. Marshall, and B.R. Lawn: J. Non-Cryst. Solids, 1979, vol. 31, pp. 415–28.10.1016/0022-3093(79)90154-6 ↗
7. J.T. Hagan: J. Mater. Sci., 1980, vol. 15, pp. 1417–24.10.1007/BF00752121 ↗
8. F. Ernsberger: J. Non-Cryst. Solids, 1977, vol. 25, pp. 293–321.10.1016/0022-3093(77)90096-5 ↗
9. S. Yoshida, J.C. Sangleboeuf, and T. Rouxel: J. Mater. Res., 2005, vol. 20, pp. 3404–12.10.1557/jmr.2005.0418 ↗
10. T.M. Gross and M. Tomozawa: J. Non-Cryst. Solids, 2008, vol. 354, pp. 4056–62.10.1016/j.jnoncrysol.2008.05.042 ↗
11. C.R. Kurkjian, G.W. Kammlott, and M.M. Chaudhri: J. Am. Ceram. Soc., 1995, vol. 78, pp. 737–44.10.1111/j.1151-2916.1995.tb08241.x ↗
12. T. Miura, Y. Benino, R. Sato, and T. Komatsu: J. Eur. Ceram. Soc., 2003, vol. 23, pp. 409–16.10.1016/S0955-2219(02)00154-1 ↗
13. H. Ji, V. Keryvin, T. Rouxel, and T. Hammouda: Scripta Mater., 2006, vol. 55, pp. 1159–62.10.1016/j.scriptamat.2006.08.038 ↗
14. S.P. Gunnasekera and D.G. Holloway: Phys. Chem. Glasses, 1973, vol. 14, pp. 45–52.
15. C.J. Fairbanks, R.S. Polvani, S.M. Wiederhorn, B.J. Hockey, and B.R. Lawn: J. Mater. Sci. Lett., 1982, vol. 1, pp. 391–93.10.1007/BF00724848 ↗
16. M. Yoshioka and N. Yoshioka: J. Appl. Phys., 1995, vol. 78, pp. 3431–37.10.1063/1.359973 ↗
17. L. Ainsworth: J. Soc. Glass Technol., 1954, vol. 38, pp. 479–500.
18. L. Hohne: Ullner C. VDI Berichte., 1995, vol. 1194, pp. 119–28.
19. K. Suzuki, Y. Benino, T. Fujiwara, and T. Komatsu: J. Am. Ceram. Soc., 2002, vol. 85, pp. 3102–04.10.1111/j.1151-2916.2002.tb00302.x ↗
20. J. Malzbender: J. Am. Ceram. Soc., 2003, vol. 86, pp. 2237–38.10.1111/j.1151-2916.2003.tb03643.x ↗
21. T. Komatsu: J. Am. Ceram. Soc., 2003, vol. 86, pp. 2239–40.10.1111/j.1151-2916.2003.tb03644.x ↗
22. C.L. Eriksson, P.L. Larsson, and D.J. Rowcliffe: Mater. Sci. Eng. A, 2003, vol. 340, pp. 193–203.10.1016/S0921-5093(02)00186-7 ↗
23. J. Gong, H. Miao, and Z. Peng: Mater. Lett., 2004, vol. 58, pp. 1349–53.10.1016/j.matlet.2003.09.026 ↗
24. Z. Peng, J. Gong, and H. Miao: J. Eur. Ceram. Soc., 2004, vol. 24, pp. 2193–2201.10.1016/S0955-2219(03)00641-1 ↗
25. K.O. Kese, Z.C. Li, and B. Bergman: Mater. Sci. Eng. A, 2005, vol. 404, pp. 1–8.10.1016/j.msea.2005.06.006 ↗
26. K.O. Kese and Z.C. Li: Scripta Mater., 2006, vol. 55, pp. 699–702.10.1016/j.scriptamat.2006.06.030 ↗
27. P. Grau, G. Berg, H. Meinhard, and S. Mosch: J. Am. Ceram. Soc., 1998, vol. 81, pp. 1557–64.10.1111/j.1151-2916.1998.tb02516.x ↗
28. D.J. Morris and R.F. Cook: J. Am. Ceram. Soc., 2004, vol. 87, pp. 1494–1501.10.1111/j.1551-2916.2004.01494.x ↗
29. R.K. Kalia, A. Nakano, I. Szlufarska, and P. Vashishta: Proc. Users Group Conf. (DOD UGC’04) by IEEE Computer Society, Williamsburg, VA, June 7–11, 2004.
30. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
31. C.A. Schuh, T.G. Nieh, and Y. Kawamura: J. Mater. Res., 2002, vol. 17, pp. 1651–54.10.1557/JMR.2002.0243 ↗
32. Y.I. Golovin, V.I. Ivolgin, V.A. Khonik, K. Kitagawa, and A.I. Tyurin: Scripta Mater., 2001, vol. 45, pp. 947–52.10.1016/S1359-6462(01)01116-2 ↗
33. C.A. Schuh and T.G. Nieh: Acta Mater., 2003, vol. 51, pp. 87–99.10.1016/S1359-6454(02)00303-8 ↗
34. O. Shikimaka and D. Grabco: J. Phys. D Appl. Phys., 2008, vol. 41, pp. 301–07.10.1088/0022-3727/41/7/074012 ↗
35. H. Bei, Z.P. Lu, and E.P. George: Phys. Rev. Lett., 2004, vol. 93, pp. 125504-1–125504-4.10.1103/PhysRevLett.93.125504 ↗
36. C.E. Packard and C.A. Schuh: Acta Mater., 2007, vol. 55, pp. 5348–58.10.1016/j.actamat.2007.05.054 ↗
37. H. Shang, T. Rouxel, M. Buckley, and C. Bernard: J. Mater. Res., 2006, vol. 21, pp. 632–38.10.1557/jmr.2006.0097 ↗
38. R.W.K. Honeycombe: Plastic Deformation of Metals, 2nd ed., Edward Arnold Ltd., London, 1984, pp. 123–38.
39. A. Puthucode, R. Banerjee, S. Vadlakonda, R. Mirshams, and M.J. Kaufman: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1552–59.10.1007/s11661-007-9338-8 ↗
40. S. Shim, H. Bei, E.P. Georgea, and G.M. Pharr: Scripta Mater., 2008, vol. 59, pp. 1095–98.10.1016/j.scriptamat.2008.07.026 ↗
41. J. Li, K.J. Van Vliet, T. Zhu, S. Yip, and S. Suresh: Nature, 2002, vol. 418, pp. 307–10.10.1038/nature00865 ↗
42. Q. Ma and D.R. Clarke: J. Mater. Res., 1995, vol. 10, pp. 853–63.10.1557/JMR.1995.0853 ↗
43. S.J. Bull, T.F. Page, and E.H. Yoffe: Phil. Mag. Lett., 1989, vol. 59, pp. 281–88.10.1080/09500838908206356 ↗
44. E.O. Bernhardt: Z. Metallkd., 1941, vol. 33, pp. 135–44.
45. W.D. Nix and H. Gao: J. Mech. Phys. Solids, 1998, vol. 46, pp. 411–25.10.1016/S0022-5096(97)00086-0 ↗
46. M.F. Horstemeyer, M.I. Baskes, and S.J. Plimpton: Acta Mater., 2001, vol. 49, pp. 4363–74.10.1016/S1359-6454(01)00149-5 ↗
47. A. Iost and R. Bigot: J. Mater. Sci., 1996, vol. 31, pp. 3573–77.10.1007/BF00360764 ↗
48. H. Li, A. Ghosh, Y.H. Han, and R.C. Bradt: J. Mater. Res., 1993, vol. 8, pp. 1028–32.10.1557/JMR.1993.1028 ↗
49. M.V. Swain and M. Wittling: Fracture Mechanics of Ceramics, R.C. Bradt, ed., Plenum Press, New York, NY, 1996, vol. 11, pp. 379–87.
50. J. Gong and Z. Guan: Mater. Lett., 2001, vol. 47, pp. 140–44.10.1016/S0167-577X(00)00225-1 ↗
51. Y.X. Gao and H. Fan: J. Mater. Sci., 2002, vol. 37, pp. 4493–98.10.1023/A:1020662215932 ↗
52. A. Dey, A.K. Mukhopadhyay, S. Gangadharan, M.K. Sinha, and D. Basu: J. Mater. Sci., 2009, vol. 44, pp. 4911–18.10.1007/s10853-009-3750-y ↗
53. C. Hays and E.G. Kendall: Metallography, 1973, vol. 6, pp. 275–82.10.1016/0026-0800(73)90053-0 ↗
54. H. Li and R.C. Bradt: Mater. Sci. Eng. A, 1991, vol. 142, pp. 51–61.10.1016/0921-5093(91)90753-A ↗
55. H.G.M. Kreuzer and R. Pippan: Acta Mater., 2007, vol. 55, pp. 3229–35.10.1016/j.actamat.2007.01.021 ↗