journal article·2002-06

On differential thermal analyzer curves for the melting and freezing of alloys

W. J. Boettinger, U. R. Kattner

Publisher page

Abstract

Using a heat-flow model of a differential thermal analyzer and thermal characteristics obtained by fitting experimental results for a pure metal, the response of the differential thermal analyzer is modeled for the melting and solidification of alloys. The enthalpy-temperature relation used for the alloy simulations is obtained by two different methods: (1) equilibrium and Scheil considerations derived solely from thermodynamic information and (2) solute-diffusion micromodels coupled to the differential thermal analysis (DTA) heat-flow equations. During the consideration of pure material melting, simple expressions are obtained for the effect of sample size and heating rate on the DTA melting onset temperature, peak temperature, and peak height, which assist in the proper calibration of a differential thermal analyzer. For alloys, the smearing effect of the DTA heat flow at different heating and cooling rates is demonstrated for various solidification-path features. In particular, the DTA peak temperature during melting, which is often selected as the liquidus temperature experimentally, is shown to be significantly higher than the liquidus temperature for small-freezing-range alloys and/or for alloys with slow solid diffusion. The DTA curves calculated for freezing with dendritic growth due to supercooling, quantify the errors associated with the determination of the liquidus temperature on cooling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. R.F. Speyer: Thermal Analysis of Materials, Marcel Dekker, Inc., New York, NY, 1994.
2. D.K. Banerjee, W.J. Boettinger, R.J. Schaefer, and M.E. Williams: Modeling of Casting, Welding and Advanced Solidification Processes, VII, M. Cross and J. Campbell, eds., TMS, Warrendale, PA, 1995, pp. 491–98.
3. A.D. Cunningham and F.W. Wilburn: in Differential Thermal Analysis, R.C. Mackenzie, ed., Academic Press, London, 1970, vol. 1, pp. 31–62.
4. A.P. Gray: in Analytical Calorimetry, R.S. Porter and J.F. Johnson, eds., Plenum Press, New York, NY, 1968, vol. 1, pp. 209–18.10.1007/978-1-4757-0001-5_27 ↗
5. W. Heyroth: J. Thermal Analysis, 1986, vol. 31, pp. 61–72.10.1007/BF01913887 ↗
6. R.D. Shull: in Thermal Analysis in Metallurgy, R.D. Shull and A. Joshi, eds., TMS, Warrendale, PA, 1992, pp. 95–119.
7. M.J. Vold: Analyt. Chem., 1949, vol. 21, pp. 683–88.10.1021/ac60030a011 ↗
8. N.F. Tsang: in Handbook of Differential Thermal Analysis, W.J. Smothers and Y. Chiang, eds., Chemical Publishing Company, New York, NY, 1966, pp. 91–123.
9. H.E. Kissinger: Analyt. Chem., 1957, vol. 29, pp. 1702–06.10.1021/ac60131a045 ↗
10. L.V. Meisel and P.J. Cote: Acta Metall., 1983, vol. 31, pp. 1053–59.10.1016/0001-6160(83)90201-8 ↗
11. T. Ozawa: J. Thermal. Analysis, 1973, vol. 5, pp. 563–76.10.1007/BF01904085 ↗
12. J.H. Flynn: J. Thermal Analysis, 1988, vol. 34, pp. 367–81.10.1007/BF01913405 ↗
13. J.H. Perepezko: in Thermal Analysis in Metallurgy, R.D. Shull and A. Joshi, eds., TMS, Warrendale, PA, 1992, pp. 121–53.
14. H. Fredriksson and B. Rogberg: Met. Sci., 1979, vol. 13, pp. 685–90.10.1016/0036-9748(79)90137-6 ↗
15. H. Fredriksson: Metals Handbook, 9th ed., vol. 15, Casting, ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 182–85.
16. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, Van Nostrand Reinhold Company, New York, NY, 1981.
17. J. Opfermann: Netzsch Thermokinetics Software Manual, Netzsch Gerätebau, Selb, Germany, 2000.
18. R.I. Wu and J.H. Perepezko: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 497–501.10.1007/s11661-000-0285-x ↗
19. H.B. Dong and J.D. Hunt: J. Thermal Analysis Calorimetry, 2001, vol. 64, pp. 167–76.10.1023/A:1011589013639 ↗
20. H.B. Dong, M.M. Shin, and J.D. Hunt: Metall. Mater. Trans. A, in press.
21. K.-W. Moon, W.J. Boettinger, U.R. Kattner, F.S. Biancaniello, and C.A. Handwerker: J. Electron. Mater., 2000, vol. 29, pp. 1122–36.10.1007/s11664-000-0003-x ↗
22. A.T. Dinsdale: CALPHAD, 1991, vol. 15, pp. 317–425.10.1016/0364-5916(91)90030-N ↗
23. N. Saunders: Mater. Sci. Forum, 1996, vols. 217–222, pp. 667–72.10.4028/www.scientific.net/MSF.217-222.667 ↗
24. N. Saunders: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 101–10.
25. W.J. Boettinger, U.R. Kattner, and D.K. Banerjee: in Modeling of Casting, Welding and Advanced Solidification Processes VIII, B.G. Thomas and C. Beckermann, eds., TMS, Warrendale PA, 1998, pp. 159–70.
26. D. Basak, W.J. Boettinger, D. Josell, S. Coriell, J. McClure, S. Krishnan, and A. Cezairliyan: Acta Mater., 1999, vol. 47, pp. 3147–58.10.1016/S1359-6454(99)00191-3 ↗
27. C.Y. Wang and C. Beckermann: Metall. Trans. A, 1993, vol. 24A, pp. 2787–2802.10.1007/BF02659502 ↗