journal article·2004-11

Thermodynamic aspects of the constitution, grain refining, and solidification enthalpies of Al-Ce-Si alloys

Joachim Gröbner, Djordje Mirković, Rainer Schmid-Fetzer

Publisher page

Abstract

The ternary Al-Ce-Si phase equilibria were investigated using X-ray diffraction (XRD) methods, metallography, scanning electron microscopy with energy-dispersive X-ray analysis (SEM/EDX) and wavelength-dispersive X-ray microanalysis, and differential thermal analysis (DTA). The focus was on the Al-rich corner and the phases in equilibrium with (Al). Key experiments were selected by preliminary thermodynamic calculations. A consistent thermodynamic description was developed using the Calphad method incorporating all experimental data. A thermodynamic assessment for the binary Ce-Si system was also performed. Two ternary phases, Ce(Si1−xAlx)2 (τ1) and AlCeSi2 (τ2), were confirmed. The phase Al2CeSi2 (τ4) was sporadically observed, but is apparently metastable. The earlier reported phase Al4Ce3Si6 could not be confirmed. In addition, the enthalpy of solidification of five Al-rich ternary alloys was measured in a differential scanning calorimetry (DSC) heat flux calorimeter. The agreement with the thermodynamic enthalpy calculations is acceptable. The fundamental intricacies involved in calculating a “latent” heat for alloys with a freezing range are pointed out. Various phase diagrams of the Al-Ce-Si system were calculated based on the thermodynamic description. They were used to quantitatively identify possible contributions to the grain refinement potential of Ce in Al-Si alloys due to the phase equilibria.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. S.A. Kori, B.S. Murty, and M. Chakraborty: Mater. Sci. Eng. A, 2000, vol. 283, pp. 94–104.10.1016/S0921-5093(99)00794-7 ↗
2. M. Easton and D. St. John: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1613–23.10.1007/s11661-999-0098-5 ↗
3. M. Easton and D. St. John: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1625–33.10.1007/s11661-999-0099-4 ↗
4. S.A. Kori, B.S. Murty, and M. Chakraborty: Mater. Sci. Technol., 1999, vol. 15, pp. 986–92.10.1179/026708399101506823 ↗
5. W. Vogel and W. Schneider: Giesserei, 1991, vol. 78, pp. 848–53.
6. C.R. Ho and B. Cantor: Acta Metall. Mater., 1995, vol. 43 (8), pp. 3231–39.10.1016/0956-7151(94)00480-6 ↗
7. J. Chang, I. Moon, and C. Choi: J. Mater. Sci., 1998, vol. 33, pp. 5015–23.10.1023/A:1004463125340 ↗
8. J. Chang, G.H. Kim, I.G. Moon, and C. Choi: Scripta Mater., 1998, vol. 39, pp. 307–14.10.1016/S1359-6462(98)00168-7 ↗
9. M. Ravi, U.T.S. Pillai, B.C. Pasi, A.D. Damodaran, and E.S. Dwarakadasa: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1283–92.10.1007/BF02649865 ↗
10. F. Benesovsky, H. Nowotny, W. Pifger, and H. Rassaerts: Monatsh. Chem., 1966, vol. 97, pp. 221–29.10.1007/BF00905509 ↗
11. K.A. Gschneidner, Jr. and M.E. Verkade: Selected Cerium Phase Diagrams, Doc. IS-RIC-7, Iowa State University, Ames, IA, 1974, pp. 36–37.10.2172/4208908 ↗
12. T.B. Massalski, P.R. Subramanian, H. Okamoto, and L. Kacprzak: Binary Alloy Phase Diagrams, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2, pp. 1110–12.
13. L.A. Dvorina: Izv. Akad. Nauk SSSR, Neorg. Mater., 1965, vol. 1 (10), pp. 1772–17 (translation: Inorg. Mater., 1965, vol. 1, pp. 1604–08).
14. L. Brewer and D. Krikorian: J. Electrochem. Soc., 1956, vol. 103 (38–51), pp. 701–03.10.1149/1.2430202 ↗
15. H. Yashima, T. Satoh, H. Mori, D. Watanage, and T. Ohtsuka, Solid State Commun., 1982, vol. 41 (1), pp. 1–4.10.1016/0038-1098(82)90237-X ↗
16. S.V. Meschel and O.J. Kleppa: J. Alloys Compounds, 1995, vol. 220, pp. 88–93.10.1016/0925-8388(94)06009-6 ↗
17. S.V. Meschel and O.J. Kleppa: J. Alloys Compounds, 1996, vol. 243, pp. 186–93.10.1016/S0925-8388(96)02400-0 ↗
18. G.M. Ryss, Y.O. Esin, A.I. Stroganov, and P.V. Gel’d: Z. Phys. Khim., 1977, vol. 51 pp. 232–33 (translation: Russ. J. Phys. Chem. 1977, vol. 51, pp. 134–35).
19. G.M. Ryss, Y.O. Esin, M.S. Petrushevskii, A.I. Stroganov, and P.V. Gel’d: Z. Phys. Khim., 1979, vol. 53, pp. 1352–53 (translation: Russ. J. Phys. Chem., 1979, vol. 53, p. 767).
20. V.S. Sudavtsova, Y.G. Gorobec, and G.I. Batalin: Rasplavy, 1988, vol. 2 (6), pp. 79–81.
21. A.T. Dinsdale: Calphad, 1991, vol. 15, pp. 317–425.10.1016/0364-5916(91)90030-N ↗
22. Pandat—Phase Diagram Calculation Engine for Multicomponent Systems, CompuTherm LLC, Madison, WI, 2000.
23. G. Brauer and H. Haag: Z. Anorg. Chem., 1952, vol. 267, pp. 198–212.10.1002/zaac.19522670404 ↗
24. O.S. Zarechnyuk: Zb. Rob. Asp. L’vov Univ. Pri., Nauk L’vov, 1963, pp. 15–20.
25. L.N. Altunina, E.I. Gladyshevsky, O.S. Zarechnyuk, and I.F. Kolobnev: Z. Neorg. Khim., 1963, vol. 8, pp. 870–73.
26. A. Raman: Z. Metallkd., 1967, vol. 58 (3), pp. 179–84.
27. A. Raman and H. Steinfink: Inorg. Chem., 1967, vol. 6, pp. 1789–95.10.1021/ic50056a006 ↗
28. A.A. Murav’eva: Autoreferat Dis. Kand. Khim., Nauk L’vov, 1972, pp. 1–18 (abstract of thesis).
29. A.A. Murav’eva, O.S. Zarechnyuk, and E.I. Gladishevskii: Visn. L’viv. Univ., Ser. Khim., 1972, vol. 13, pp. 14–17.
30. H. Flandorfer and P. Rogl: J. Solid State Chem., 1996, vol. 127, pp. 308–14.10.1006/jssc.1996.0388 ↗
31. H. Flandorfer, D. Kaczorowski, J. Gröbner, P. Rogl, R. Wouters, C. Godart, and A. Kostikas: J. Solid State Chem., 1998, vol. 137, pp. 191–205.10.1006/jssc.1997.7660 ↗
32. G.W.H. Höhne, W. Hemminger, and H.-J. Flammersheim: Differential Scanning Calorimetry: an Introduction for Practitioners, Springer-Verlag, Berlin, 1996, pp. 103–04.10.1007/978-3-662-03302-9 ↗
33. G. Cacciamani and R. Ferro: Calphad, 2001, vol. 25, pp. 583–97.10.1016/S0364-5916(02)00009-3 ↗
34. J. Gröbner, H.-L. Lukas, and F. Aldinger: Calphad, 1996, vol. 20 (2), pp. 247–54.10.1016/S0364-5916(96)00027-2 ↗
35. S.-L. Chen, S. Daniel, F. Zhang, Y.A. Chang, W.A. Oates, and R. Schmid-Fetzer: J. Phase Equilibria, 2001, vol. 22 (4), pp. 373–78.10.1361/105497101770332910 ↗
36. R. Schmid-Fetzer and J. Gröbner: Adv. Eng. Mater., 2001, vol. 3 (12), pp. 947–61.10.1002/1527-2648(200112)3:12<947::AID-ADEM947>3.0.CO;2-P ↗
37. H.B. Dong, M.R.M. Shin, E.C. Kurum, H. Cama, and J.D. Hunt: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 441–47.10.1007/s11661-003-0080-6 ↗
38. A. Munitz, A.B. Gokhale, and G.I. Abbaschian: Bull. Alloy Phase Diagrams, 1989, vol. 10 (1), pp. 73–78.10.1007/BF02882179 ↗