Effect of the Intercritical Annealing Temperature on the Mechanical Properties of 10 Pct Mn Multi-phase Steel
Source abstract
Abstract
Intercritically annealed 10 pct Mn steel has been shown to exhibit an excellent combination of strength and ductility due to the plasticity-enhancing mechanisms of mechanical twinning and strain-induced martensite transformation occurring in sequence. This mechanical behavior is only achieved for a multi-phase microstructure obtained after annealing within a specific intercritical temperature range. A model for the selection of the optimal intercritical annealing temperature was developed to achieve a high strength-ductility balance for 10 pct Mn multi-phase steel. The model considers the room temperature stacking fault energy and the thermodynamic stability of the retained austenite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. S.W. Lee, B.C. De Cooman: Metall. Mater. Trans. A, 44A (2013) 5018–24.10.1007/s11661-013-1860-2 ↗
2. S.W. Lee, S.-J. Lee, B.C. De Cooman, Acta Mater. 59 (2011) 7546–553.10.1016/j.actamat.2011.08.030 ↗
3. X. Tian, Y. Zhang, Mater. Sci. Eng. A, 516 (2009) 73–77.10.1016/j.msea.2009.02.031 ↗
4. H.-W. Yen, M. Huang, C.P. Scott, J.-R. Yang, Scripta Mater. 66 (2012) 1018–23.10.1016/j.scriptamat.2012.02.002 ↗
5. S.W. Lee, J.K. Kim, S.-J. Lee, B.C. De Cooman, Scripta Mater. 65 (2011) 1073–76.10.1016/j.scriptamat.2011.09.019 ↗
6. S.W. Hwang, J.H. Ji, E.G. Lee, K.-T. Park, Mater. Sci. Eng. A, 528 (2011) 5196–5203.10.1016/j.msea.2011.03.045 ↗
7. B.C. De Cooman, P. Gibbs, S.W. Lee, D.K. Matlock, Metall. Mater. Trans. A 44 (2013) 2563–72.10.1007/s11661-013-1638-6 ↗
8. T.H. Lee, E.J. Shin, C.-S. Oh, H.-Y. Ha, S.-J. Kim, Acta Mater. 58 (2010) 3173–86.10.1016/j.actamat.2010.01.056 ↗
9. O. Bouaziz, S. Allain, C. Scott, Scripta Mater., 58 (2008) 484–87.10.1016/j.scriptamat.2007.10.050 ↗
10. J.-E. Jin, Y.-K. Lee, Mater. Sci. Eng. A 527 (2009) 157–61.10.1016/j.msea.2009.08.028 ↗
11. K.-T. Park, G.S. Kim, S.K. Kim, S.W. Lee, S.W. Hwang, C.S. Lee, Met. Mater. Int. 16 (2010) 1–6.10.1007/s12540-010-0001-3 ↗
12. S.W. Hwang, J.H. Ji, K.-T. Park, Mater. Sci. Eng. A 528 (2011) 7267–75.10.1016/j.msea.2011.06.020 ↗
13. S. Allain, J.-P. Chateau, O. Bouaziz, S. Migot, N. Guelton, Mater. Sci. Eng. A 387–389 (2004) 158–62.10.1016/j.msea.2004.01.059 ↗
14. A. Saeed-Akbari, J. Imlau, U. Prahl, W. Bleck, Metall. Mater. Trans. A 40A (2009) 3076–90.10.1007/s11661-009-0050-8 ↗
15. A. Dumay, J.-P. Chateau, S. Allain, S. Migot, O. Bouaziz, Mater. Sci. Eng. A 483–484 (2008) 184–87.10.1016/j.msea.2006.12.170 ↗
16. S.W. Lee, B.C. De Cooman, Metall. Mater. Trans. A, 45A (2014) 709–16.10.1007/s11661-013-2047-6 ↗
17. I. Gutierrez, S. Zaefferer, D. Raabe, Mater. Sci. Eng. A, 527 (2010) 3552–60.10.1016/j.msea.2010.02.041 ↗
18. S.-J. Lee, S. W. Lee, B.C. De Cooman, Int. J. Mater. Res. 103 (2012) 1–7.10.3139/146.012012 ↗
19. D.P. Koistinen, R.E. Marburger, Acta Metall. 7 (1959) 59–60.10.1016/0001-6160(59)90170-1 ↗
20. G.B. Olson, M. Cohen, Metall. Trans. A, 7A (1976) 1897–1904.
21. S. Takaki, H. Nakatsu, Y. Tokunaga, Mater. Trans. JIM. 34, (1993) 489–96.10.2320/matertrans1989.34.489 ↗