journal article·2012-12

Influence of Tool Offsetting on the Structure and Morphology of Dissimilar Aluminum to Copper Friction-Stir Welds

Ivan Galvão, Altino Loureiro, David Verdera, Daniel Gesto, Dulce Maria Rodrigues

Publisher page

Abstract

In this work, a systematic analysis of the effect of tool offsetting on the morphological, structural, and mechanical properties of 6082-T6 aluminum to copper-DHP friction-stir welds was performed, enabling full understanding of Al-Cu bonding structure and failure mechanisms. Important relations between tool positioning and the thermomechanical phenomena taking place during welding were established. Tool offsetting was revealed to be an effective way of solving one of the most important concerns in Al/Cu friction-stir welding, i.e., the formation of large amounts of intermetallic-rich structures, which deeply influence the final strength and surface morphology of the welds. Actually, for welds produced without tool offsetting, it was found that the formation of fluidized intermetallic-rich structures promote the formation of internal decohesion areas inside the nugget, which have a detrimental effect on weld strength. For welds carried out with tool offsetting, intermetallic formation is almost suppressed, but important metallurgical discontinuities in the vicinity of large copper fragments, dispersed over the nugget, and at the nugget/copper interface were also found to have a detrimental effect on weld strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. T. DebRoy and H.K.D.H. Bhadeshia: Sci. Technol. Weld. J., 2010, vol. 15, no. 4, pp. 266–70.10.1179/174329310X12726496072400 ↗
2. I. Galvão, J.C. Oliveira, A. Loureiro, and D.M. Rodrigues: Sci. Technol. Weld. J., 2011, vol. 16, no. 8, pp. 681–89.10.1179/1362171811Y.0000000057 ↗
3. D.J. Blosmo, T. Curtis, T. Johnson, N. Procive, C.A. Widener, B. Carlson, R. Szymanski, and M.K. West: Friction Stir Welding and Processing VI, R. Mishra, M.W. Mahoney, Y. Sato, Y. Hovanski, and R. Verma, eds., Wiley, Hoboken, NJ, 2011, pp. 409–16.10.1002/9781118062302.ch47 ↗
4. M. Geiger, F. Micari, M. Merklein, L. Fratini, D. Contorno, A. Giera, and D. Staud: Int. J. Mach. Tools Manu., 2008, vol. 48, pp. 515–21.10.1016/j.ijmachtools.2007.08.002 ↗
5. H.J. Liu, J.J. Shen, S. Xie, Y.X. Huang, F. Cui, C. Liu, and L.Y. Kuang: Sci. Technol. Weld. J., 2012, vol. 17, no. 2, pp. 104–10.10.1179/1362171811Y.0000000086 ↗
6. H. Okamura and K. Aota: Weld. Int., 2004, vol. 18, no. 11, pp. 852–60.10.1533/wint.2004.3344 ↗
7. C. Genevois, M. Girard, B. Huneau, X. Sauvage, and G. Racineux: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2290–95.10.1007/s11661-011-0660-9 ↗
8. P. Xue, D.R. Ni, D. Wang, B.L. Xiao, and Z.Y. Ma: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4683–89.10.1016/j.msea.2011.02.067 ↗
9. H.J. Liu, J.J. Shen, L. Zhou, Y.Q. Zhao, C. Liu, and L.Y. Kuang: Sci. Technol. Weld. J. 2011, vol. 16, no. 1, pp. 92–99.10.1179/1362171810Y.0000000007 ↗
10. I. Galvão, R.M. Leal, A. Loureiro, and D.M. Rodrigues: Sci. Technol. Weld. J., 2010, vol. 15, no. 8, pp. 654–60.10.1179/136217110X12785889550109 ↗
11. E. Akinlabi, A. Els-Botes, and H. Lombard: 8th International Symposium on Friction Stir Welding, Timmendorfer Strand, Germany, 2010.
12. C. Leitão, R.M. Leal, D.M. Rodrigues, A. Loureiro, and P. Vilaça: Mater. Des., 2009, vol. 30, pp. 101–08.10.1016/j.matdes.2008.04.045 ↗
13. R.M. Leal, N. Sakharova, P. Vilaça, D.M. Rodrigues, and A. Loureiro: Sci. Technol. Weld. J., 2011, vol. 16, no. 2, pp. 146–52.10.1179/1362171810Y.0000000005 ↗
14. I. Galvão, J.C. Oliveira, A. Loureiro, and D.M. Rodrigues: Intermetallics, 2012, vol. 22, pp. 122–28.10.1016/j.intermet.2011.10.014 ↗
15. J. Ouyang, E. Yarrapareddy, and R. Kovacevic: J. Mater. Process. Technol., 2006, vol. 172, pp. 110–22.10.1016/j.jmatprotec.2005.09.013 ↗
16. V. Firouzdor and S. Kou: Metall. Mater. Trans. A, 2011, vol. 43A, pp. 303–15.
17. R.M. Leal, C. Leitão, A. Loureiro, D.M. Rodrigues, and P. Vilaça: Mater. Sci. Eng. A, 2008, vol. 498, pp. 384–91.10.1016/j.msea.2008.08.018 ↗
18. A. Esmaeili, M.K.B. Givi, and H.R.Z. Rajani: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7093–7102.10.1016/j.msea.2011.06.004 ↗
19. P. Xue, B.L. Xiao, D.R. Ni, and Z.Y. Ma: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5723–27.10.1016/j.msea.2010.05.061 ↗