journal article·2014-07Open access

An A Priori Hot-Tearing Indicator Applied to Die-Cast Magnesium-Rare Earth Alloys

Mark A. Easton, Mark A. Gibson, Suming Zhu, Trevor B. Abbott

Abstract

Hot-tearing susceptibility is an important consideration for alloy design. Based on a review of previous research, an a priori indicator for the prediction of an alloy’s hot-tearing susceptibility is proposed in this article and is applied to a range of magnesium-rare earth (RE)-based alloys. The indicator involves taking the integral over the solid fraction/temperature curve between the temperature when feeding becomes restricted (coherency) and that when a three-dimension network of solid is formed (coalescence). The hot-tearing propensity of Mg-RE alloys is found to vary greatly depending on which RE is primarily used, due to the difference in the solidification range. Mg-Nd alloys are the most susceptible to hot tearing, followed by Mg-Ce-based alloys, while Mg-La alloys show almost no hot tearing. The proposed indicator can be well applied to hot-tearing propensity of the Mg-RE alloys. It is expected that the indicator could be used as an estimation of the relative hot-tearing propensity in other alloy systems as well.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. L. Bichler and C. Ravindran: Mater. Des., 2010. vol. 31, pp. S17-S23.10.1016/j.matdes.2009.12.003 ↗
2. L. Katgerman: JOM, 1982. vol. 34, pp. 449-55.10.1007/BF03339110 ↗
3. T.W. Clyne, Solidification Cracking of Aluminium Alloys. 1976, The University of Cambridge: Cambridge.
4. J. Campbell and T.W. Clyne: Cast Met., 1991. vol. 3(4), pp. 224-26.10.1080/09534962.1990.11819043 ↗
5. M.O. Pekguleryuz, S. Lin, E. Ozbakir, D. Temur, and C. Aliravci: Int. J. Cast Met. Res., 2010. vol. 23(5), pp. 310-20.10.1179/136404610X12738456167267 ↗
6. M. Rappaz, A. Jacot, and W.J. Boettinger: Metall. Mater. Trans. A, 2003. vol. 34A, pp. 467-79.10.1007/s11661-003-0083-3 ↗
7. N. Wang, S. Mokadem, M. Rappaz, and W. Kurz: Acta Mater., 2004. vol. 52(11), pp. 3173-82.10.1016/j.actamat.2004.03.047 ↗
8. D.J. Lahaie and M. Bouchard: Metall. Mater. Trans. B, 2001. vol. 32B, pp. 697-705.10.1007/s11663-001-0124-5 ↗
9. M. M’Hamdi, R. Krieft, D. Mortensen, A. Mo, and J. Rabenburg: Aluminium, 2002, vol. 78 (10), p. 847.
10. D. Fabrègue, A. Deschamps, M. Suéry, and J.-M. Drezet: Acta Mater., 2006. vol. 54, pp. 5209-20.10.1016/j.actamat.2006.06.027 ↗
11. M.G. Pokorny, C.A. Monroe, C. Beckermann, Z. Zhen, and N. Hort: Metall. Mater. Trans. A, 2010. vol. 41A, pp. 3196-3207.10.1007/s11661-010-0367-3 ↗
12. D.G. Eskin, Suyitno, J.F. Mooney, and L. Katgerman: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1325–35.10.1007/s11661-004-0307-1 ↗
13. S. Lin, C. Aliravci, and M.O. Pekguleryuz: Metall. Mater. Trans. A, 2007. vol. 38A, pp. 1056-68.10.1007/s11661-007-9132-7 ↗
14. Ø. Nielsen, L. Arnberg, A. Mo, and H. Thevik: Metall. Mater. Trans. A, 1999. vol. 30A, pp. 2455-62.10.1007/s11661-999-0254-y ↗
15. S. Li, K. Sadayappan, and D. Apelian: Metall. Mater. Trans. A, 2013. vol. 44A, pp. 614-23.10.1007/s11663-013-9801-4 ↗
16. Suyitno, D.G. Eskin, V.I. Savran, and L. Katgerman: Metall. Mater. Trans. A, 2004. vol. 35, pp. 3551–61.10.1007/s11661-004-0192-7 ↗
17. M. M’Hamdi, A. Mo, and H.G. Fjaer: Metall. Mater. Trans. A, 2006. vol. 37A, pp. 3069-83.10.1007/s11661-006-0188-6 ↗
18. A. Stangeland, A. Mo, M. M’Hamdi, D. Viano, and C.J. Davidson: Metall. Mater. Trans. A, 2006. vol. 37A, pp. 705-14.10.1007/s11661-006-0042-x ↗
19. A. Stangeland, A. Mo, and D.G. Eskin: Metall. Mater. Trans. A, 2006. vol. 37A, pp. 2219-29.10.1007/BF02586141 ↗
20. Suyitno, W.H. Kool, and L. Katgerman: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2388–2400.10.1007/s11661-009-9941-y ↗
21. H. Hao, D.M. Maijer, M.A. Wells, A. Phillion, and S.L. Cockcroft: Metall. Mater. Trans. A, 2010. vol. 41A, pp. 2067-77.10.1007/s11661-010-0216-4 ↗
22. M. M’Hamdi and A. Mo: Mater. Sci. Eng. A, 2005. vol. 413-414, pp. 105-08.10.1016/j.msea.2005.09.050 ↗
23. A.B. Phillion, S.L. Cockroft, and P.D. Lee: Mater. Sci. Eng. A, 2008. vol. 491(1-2), pp. 237-47.10.1016/j.msea.2008.01.078 ↗
24. A. Stangeland, A. Mo, Ø. Nielsen, D.G. Eskin, and M. M’Hamdi: Metall. Mater. Trans. A, 2004. vol. 35A, pp. 2903-15.10.1007/s11661-004-0238-x ↗
25. S. Vernéde and M. Rappaz: Philos. Mag., 2006. vol. 86(24), pp. 3779-94.10.1080/14786430500228705 ↗
26. S. Vernéde, P. Jarry, and M. Rappaz: Acta Mater., 2006. vol. 54, pp. 4023-34.10.1016/j.actamat.2006.04.035 ↗
27. P. Gunde, A. Schiffl, and P.J. Uggowitzer: Mater. Sci. Eng. A, 2010. vol. 527, pp. 7074-79.10.1016/j.msea.2010.07.086 ↗
28. Z.G. Wang, Y. Huang, A. Srinivasan, Z.K. Liu, F. Beckmann, K.U. Kainer, and N. Hort: Mater. Des., 2013. vol. 47, pp. 90-100.10.1016/j.matdes.2012.12.044 ↗
29. L. Zhou, Y.-D. Huang, P.-L. Mao, K.U. Kainer, Z. Liu, and N. Hort: Int. J. Cast Met. Res., 2011. vol. 24 (3/4), pp. 170–76.10.1179/136404611X13001912813942 ↗
30. G. Cao and S. Kau: Mater. Sci. Eng. A, 2006. vol. 417, pp. 230-38.10.1016/j.msea.2005.10.050 ↗
31. X. Yan and J.C. Lin: Metall. Mater. Trans. B, 2006. vol. 37B, pp. 913-18.10.1007/BF02735013 ↗
32. N. Hatami, R. Babaei, M. Dadashzadeh, and P. Davami: J. Mater. Process. Technol., 2008. vol. 205(2), pp. 506-13.10.1016/j.jmatprotec.2007.11.260 ↗
33. Suyitno, W.H. Kool, and L. Katgerman: Metall. Mater. Trans. A, 2005. vol. 36A, pp. 1537–46.10.1007/s11661-005-0245-6 ↗
34. I. Farup and A. Mo: Metall. Mater. Trans. A, 2000. vol. 31A, pp. 1461-72.10.1007/s11661-000-0264-2 ↗
35. A. Luo: Int. Mater. Rev., 2004. vol. 49(1), pp. 13-30.10.1179/095066004225010497 ↗
36. F. Penghuai, P. Liming, J. Haiyan, C. Jianwei, and Z. Chunquan: Mater. Sci. Eng. A, 2008. vol. 486, pp. 183-92.10.1016/j.msea.2007.08.064 ↗
37. C.J. Bettles, M.A. Gibson, and S.M. Zhu: Mater. Sci. Eng. A, 2009. vol. 505(1-2), pp. 6-12.10.1016/j.msea.2008.11.004 ↗
38. A.C. Hänzi, A.S. Sologubenko, and P.J. Uggowitzer: Int. J. Mater. Res., 2009. vol. 100(8), pp. 1127-36.10.3139/146.110157 ↗
39. R.A. Rossenberg, M.C. Flemings, and H.F. Taylor: AFS Trans., 1960. vol. 68, pp. 518-28.
40. R.A. Dodd, W.A. Pollard, and J.W. Meier: AFS Trans., 1957. vol. 65, pp. 110-17.
41. J.A. Spittle and S.G. Brown: Mater. Sci. Technol., 2005. vol. 21(9), pp. 1-7.10.1179/174328405X51839 ↗
42. A. Srinivasan, Z. Wang, Y. Huan, F. Beckmann, K.U. Kainer, and N. Hort: Metall. Mater. Trans. A, 2013. vol. 44A, pp. 2285-98.10.1007/s11661-012-1593-7 ↗
43. T.L. Chia, M.A. Easton, S.M. Zhu, M.A. Gibson, N. Birbilis, and J.F. Nie: Intermetallics, 2009. vol. 17, pp. 481-90.10.1016/j.intermet.2008.12.009 ↗
44. S.M. Zhu, M.A. Gibson, M.A. Easton, and J.F. Nie: Scripta Mater., 2010. vol. 63(7), pp. 698-703.10.1016/j.scriptamat.2010.02.005 ↗
45. N. Birbilis, M.K. Cavanaugh, A.D. Sudholz, S. Zhu, M.A. Easton, and M.A. Gibson: Corros. Sci., 2011. vol. 53(1), pp. 168-76.10.1016/j.corsci.2010.09.013 ↗
46. N. Birbilis, M.A. Easton, A.D. Sudholz, S.M. Zhu, and M.A. Gibson: Corros. Sci., 2009. vol. 51(3), pp. 683-89.10.1016/j.corsci.2008.12.012 ↗
47. L.L. Rokhlin: Magnesium Alloys Containing Rare Earth Metals, Taylor & Francis, New York, 2003, pp. 159–64.10.1201/9781482265163 ↗
48. M.A. Easton, K. Strobel, S. Zhu, M.A. Gibson, and J.F. Nie: Mater. Sci. Forum, 2010. vol. 654-656, pp. 683-86.10.4028/www.scientific.net/MSF.654-656.683 ↗
49. D. Warrington and D.G. McCartney: Cast Met., 1989. vol. 2, pp. 134-43.10.1080/09534962.1989.11818994 ↗
50. J. Spittle and A. Cushway: Met. Technol., 1983. vol. 10, pp. 6-13.10.1179/030716983803291226 ↗
51. M. Easton, T. Abbott, J.F. Nie, and G. Savage: Magnesium Technology, TMS, Warrendale, 2008, pp. 323–28.
52. W. Xiao, M.A. Easton, S. Zhu, M.S. Dargusch, M.A. Gibson, S. Jia, and J.F. Nie: Adv. Eng. Mater., 2012. vol. 14(1-2), pp. 68-76.10.1002/adem.201100149 ↗
53. S. Gavras, M.A. Easton, M.A. Gibson, S. Zhu, and J.F. Nie: J. Alloy. Compd., 2014, vol. 597, pp. 21–29.10.1016/j.jallcom.2014.01.204 ↗
54. L. Sweet, M.A. Easton, J.A. Taylor, J. Grandfield, C.J. Davidson, L. Lu, M.J. Couper, and D.H. StJohn: Metall. Mater. Trans. A, 2013. vol. 44A, pp. 5396-407.10.1007/s11661-012-1562-1 ↗
55. J. Campbell: Castings, 2nd ed., Butterworth-Heinemann, Oxford, 2003, p. 328.
56. T.W. Clyne and G.J. Davies: Br. Foundrym., 1981. vol. 74, pp. 65-73.
57. L. Bichler, C. Ravindran, and D. Sediako: Can. Metall. Q., 2009. vol. 48(1), pp. 81-90.10.1179/cmq.2009.48.1.81 ↗
58. G. Cao and S. Kou: Metall. Mater. Trans. A, 2006. vol. 37A, pp. 3647-63.10.1007/s11661-006-1059-x ↗
59. G. Cao, I. Haywood, and S. Hou: Metall. Mater. Trans. A, 2010. vol. 41A, pp. 2139-50.10.1007/s11661-010-0248-9 ↗
60. J.F. Grandfield, C.J. Davidson, and J.A. Taylor: Light Metals 2001, 2001, The Metals, Minerals and Materials Society, pp. 911-917.
61. S.G. Brown, J.A. Spittle, D.J. Jarvis, and R. Walden-Bevan: Acta Mater., 2002. vol. 50(6), pp. 1559-69.10.1016/S1359-6454(02)00014-9 ↗
62. Y.F. Guven and J.D. Hunt: Cast Met., 1988. vol. 1, pp. 104-11.10.1080/09534962.1988.11818955 ↗
63. A.K. Dahle, S. Instone, and T. Sumitomo: Metall. Mater. Trans. A, 2003. vol. 34A, pp. 105-13.10.1007/s11661-003-0212-z ↗
64. C. Puncreobutr, P.D. Lee, R.W. Hamilton, B. Cai, and T. Connolley: Metall. Mater. Trans. A, 2013. vol. 44A, pp. 5389-95.10.1007/s11661-012-1563-0 ↗
65. J. Zhang and R.F. Singer: Acta Mater., 2002. vol. 50, pp. 1869-79.10.1016/S1359-6454(02)00042-3 ↗
66. M. Rappaz, J.-M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999. vol. 30A, pp. 449-55.10.1007/s11661-999-0334-z ↗
67. M.A. Easton, H. Wang, J.F. Grandfield, D.H. StJohn, and E. Sweet: Mater. Forum, 2004. vol. 28, pp. 224-29.
68. M.A. Easton, H. Wang, J. Grandfield, C.J. Davidson, D.H. StJohn, L. Sweet, and M.J. Couper: Metall. Mater. Trans. A, 2012. vol. 43A, pp. 3227-38.10.1007/s11661-012-1132-6 ↗
69. M.E. Glicksman and R.N. Hills: Philos. Mag. A, 2001. vol. 81(1), pp. 153-59.10.1080/01418610108216625 ↗
70. D. Mirković and R. Schmid-Fetzer: Metall. Mater. Trans. A, 2009. vol. 40A, pp. 958-73.10.1007/s11661-009-9787-3 ↗
71. J.R. TerBush, R.R. Adarapurapu, J.W. Jones, and T.M. Pollock: in Magnesium Technology 2009, E.A. Nyberg, et al., eds., The Metals, Minerals and Materials Society, Warrendale, PA/San Fransisco, 2009, pp. 161–65.
72. X. Doré, H. Combeau, and M. Rappaz: Acta Mater., 2000. vol. 48, pp. 3951-62.10.1016/S1359-6454(00)00177-4 ↗
73. S. Li, K. Sadayappan, and D. Apelian: Int. J. Cast Met. Res., 2011. vol. 24(2), pp. 88-95.10.1179/1743133610Y.0000000004 ↗
74. S. Instone, D.H. StJohn, and J. Grandfield: Int. J. Cast Met. Res., 2000. vol. 12, pp. 441-56.10.1080/13640461.2000.11819381 ↗
75. S. Vernéde, J.A. Dantzig, and M. Rappaz: Acta Mater., 2009. vol. 57, pp. 1554-59.10.1016/j.actamat.2008.12.006 ↗
76. D.G. Eskin, Suyitno, and L. Katgerman: Prog. Mater. Sci., 2004, vol. 49, pp. 629–711.10.1016/S0079-6425(03)00037-9 ↗
77. M.A. Easton, M.A. Gibson, D. Qiu, S.M. Zhu, J. Gröbner, R. Schmid-Fetzer, J.F. Nie, and M.X. Zhang: Acta Mater., 2012. vol. 60, pp. 4420-30.10.1016/j.actamat.2012.04.039 ↗
78. I.J. Polmear: Mater. Sci. Technol., 1994. vol. 10(1), pp. 1-16.10.1179/mst.1994.10.1.1 ↗
79. W. Xiao, S.M. Zhu, M.A. Easton, M. Dargusch, M.A. Gibson, and J.F. Nie: Mater. Charact., 2012. vol. 65, pp. 28-36.10.1016/j.matchar.2012.01.001 ↗
80. K.V. Yang, M.A. Easton, and C.H. Cáceres: Adv. Eng. Mater., 2013. vol. 15(4), pp. 302-07.10.1002/adem.201200188 ↗
81. K.V. Yang, C.H. Caceres, M.A. Easton, and M.A. Gibson: Kovove Materialy, 2011. vol. 49(3), pp. 207-12.10.4149/km_2011_3_207 ↗