journal article·2009-05

Load Partitioning and Strain-Induced Martensite Formation during Tensile Loading of a Metastable Austenitic Stainless Steel

P. Hedström, L. E. Lindgren, J. Almer, U. Lienert, J. Bernier, M. Terner, M. Odén

Publisher page

Abstract

In-situ high-energy X-ray diffraction and material modeling are used to investigate the strain-rate dependence of the strain-induced martensitic transformation and the stress partitioning between austenite and α′ martensite in a metastable austenitic stainless steel during tensile loading. Moderate changes of the strain rate alter the strain-induced martensitic transformation, with a significantly lower α′ martensite fraction observed at fracture for a strain rate of 10−2 s−1, as compared to 10−3 s−1. This strain-rate sensitivity is attributed to the adiabatic heating of the samples and is found to be well predicted by the combination of an extended Olson–Cohen strain-induced martensite model and finite-element simulations for the evolving temperature distribution in the samples. In addition, the strain-rate sensitivity affects the deformation behavior of the steel. The α′ martensite transformation at high strains provides local strengthening and extends the time to neck formation. This reinforcement is witnessed by a load transfer from austenite to α′ martensite during loading.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. G.B. Olson and M. Cohen: Metall. Trans. A, 1975, vol. 6A, pp. 791–95.10.1007/BF02672301 ↗
2. V.F. Zackay, E.R. Parker, D. Fahr, and R. Busch: Trans. Am. Soc. Met., 1967, vol. 60, pp. 252–59.
3. J.P. Bressanelli and A. Moskowitz: Trans. ASM, 1965, vol. 58, pp. 499–509.
4. P. Hedström, U. Lienert, J. Almer, and M. Odén: Scripta Mater., 2007, vol. 56, pp. 213–16.10.1016/j.scriptamat.2006.10.009 ↗
5. E.R. Parker and V.F. Zackay: Eng. Fract. Mech., 1973, vol. 5, pp. 147–65.10.1016/0013-7944(73)90013-1 ↗
6. T. Angel: JISI, 1954, May, pp. 165–74.
7. G.W. Powell, E.R. Marshall, and W.A. Backhofen: ASM Trans. Q., 1958, vol. 50, pp. 478–79.
8. G.L. Huang, D.K. Matlock, and G. Krauss: Metall. Trans. A, 1989, vol. 20A, pp. 1239–46.10.1007/BF02647406 ↗
9. L.-E. Lindgren: AIP Conf. Proc., 2004, vol. 712, pp. 1748–53.10.1063/1.1766784 ↗
10. Y. Tomita and T. Iwamoto: Int. J. Mech. Sci., 1995, vol. 37 (12), pp. 1295–1305.10.1016/0020-7403(95)00039-Z ↗
11. L.-E. Lindgren, H. Alberg, and K. Domkin: Proc. Computational Plasticity VII, Barcelona, Spain, 2003, D.R.J Owen and E. Oñate, eds., International Center for Numerical Methods in Engineering, Barcelona, Spain, CD-ROM.
12. B.D. Cullity: Elements of X-Ray Diffraction, 3rd ed., Addison-Wesley, Reading, MA, 1967, p. 391.
13. A.K. De, D.C. Murdock, M.C. Mataya, J.G. Speer, and D.K. Matlock: Scripta Mater., 2004, vol. 50, pp. 1445–49.10.1016/j.scriptamat.2004.03.011 ↗
14. M.J. Dickson: J. Appl. Crystallogr., 1969, vol. 2, pp. 176–80.10.1107/S0021889869006881 ↗
15. M.L. Young, J.D. Almer, M.R. Daymond, D.R. Haeffner, and D.C. Dunand: Acta Mater., 2007, vol. 55, pp. 1999–2011.10.1016/j.actamat.2006.11.004 ↗
16. J. Almer, U. Lienert, R.L. Peng, C. Schlauer, and M. Odén: J. Appl. Phys., 2003, vol. 94 (1), pp. 697–702.10.1063/1.1582351 ↗
17. V. Hauk: Structural and Residual Stress Analysis by Nondestructive Methods, Elsevier, Amsterdam, The Netherlands, 1997, p. 234.
18. B.B. He and K.L. Smith: SEM Ann. Conf. Proc., Houston, TX, 1998, pp. 217–20.
19. M.R. Daymond, C.N. Tomé, and M.A.M. Bourke: Acta Mater., 2000, vol. 48, pp. 553–64.10.1016/S1359-6454(99)00354-7 ↗
20. Y. Tomita and Y. Shibutani: Int. J. Plast., 2000, vol. 16, pp. 769–89.10.1016/S0749-6419(99)00080-7 ↗
21. R.G. Stringfellow, D.M. Parks, and G.B. Olson: Acta Metall. Mater., 1992, vol. 40 (7), pp. 1703–16.10.1016/0956-7151(92)90114-T ↗
22. T. Iwamoto, T. Tsuta, and Y. Tomita: Int. J. Mech. Sci., 1998, vol. 40 (2–3), pp. 173–82.10.1016/S0020-7403(97)00047-7 ↗
23. J.C. Simo and T.J.R. Hughes: Computational Inelasticity, Springer-Verlag, New York, NY, 1998, vol. 7, pp. 113–53.
24. T. Belytschko, W.K. Liu, and B. Moran: Nonlinear Finite Elements for Continua and Structures, John Wiley & Sons, New York, NY, 2000, pp. 277–85.
25. K. Domkin: Doctoral Thesis, Luleå University of Technology, Luleå, Sweden, 2005, pp. 137–46.
26. T. Iwamoto: Int. J. Plast., 2004, vol. 20, pp. 841–69.10.1016/j.ijplas.2003.05.002 ↗
27. L.E. Murr, K.P. Staudhammer, and S.S. Hecker: Metall. Trans. A, 1982, vol. 13A, pp. 627–35.10.1007/BF02644428 ↗
28. M. Azrin, G.B. Olson, and R.A. Gagne: Mater. Sci. Eng., 1976, vol. 23, pp. 33–41.10.1016/0025-5416(76)90084-7 ↗
29. S.S. Hecker, M.G. Stout, K.P. Staudhammer, and J.L. Smith: Metall. Trans. A, 1982, vol. 13A, pp. 619–26.10.1007/BF02644427 ↗
30. P.J. Ferreira, J.B. Vander Sande, M. Amaral Fortes, and A. Kyrolainen: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3091–3101.10.1007/s11661-004-0054-3 ↗
31. J. Talonen, P. Nenonen, G. Pape, and H. Hänninen: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 421–32.10.1007/s11661-005-0313-y ↗
32. D. Peckner and I.M. Bernstein: Handbook of Stainless Steels, McGraw-Hill, New York, NY, 1977, pp. 4–26.
33. J. Talonen: Doctoral Thesis, Helsinki University of Technology, Helsinki, Finland, 2007, pp. 92–100.
34. A.K. De, J.G. Speer, D.K. Matlock, D.C. Murdock, M.C. Mataya, and R.J. Comstock, Jr.: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1875–86.10.1007/s11661-006-0130-y ↗
35. K. Spencer, J.D. Embury, K.T. Conlon, M. Véron, and Y. Bréchet: Mater. Sci. Eng., A, 2004, vols. 387–389, pp. 873–81.10.1016/j.msea.2003.11.084 ↗
36. J. Johansson and M. Odén: Metall. Mater. Trans. A, 2000, vol. 31, pp. 1557–70.10.1007/s11661-000-0166-3 ↗
37. J.J. Moverare and M. Odén: Metall. Mater. Trans. A, 2002, vol. 33, pp. 57–71.10.1007/s11661-002-0005-9 ↗
38. P. Hedström, U. Lienert, J. Almer, and M. Odén: Mater. Lett., 2008, vol. 62 (2), pp. 338–40.10.1016/j.matlet.2007.05.054 ↗