journal article·2011-07

Microstructure and Mechanical Properties of Fiber-Laser-Welded and Diode-Laser-Welded AZ31 Magnesium Alloy

S. M. Chowdhury, D. L. Chen, S. D. Bhole, E. Powidajko, D. C. Weckman, Y. Zhou

Publisher page

Abstract

The microstructures, tensile properties, strain hardening, and fatigue strength of fiber-laser-welded (FLW) and diode-laser-welded (DLW) AZ31B-H24 magnesium alloys were studied. Columnar dendrites near the fusion zone (FZ) boundary and equiaxed dendrites at the center of FZ, with divorced eutectic β-Mg17Al12 particles, were observed. The FLW joints had smaller dendrite cell sizes with a narrower FZ than the DLW joints. The heat-affected zone consisted of recrystallized grains. Although the DLW joints fractured at the center of FZ and exhibited lower yield strength (YS), ultimate tensile strength (UTS), and fatigue strength, the FLW joints failed at the fusion boundary and displayed only moderate reduction in the YS, UTS, and fatigue strength with a joint efficiency of ~91 pct. After welding, the strain rate sensitivity basically vanished, and the DLW joints exhibited higher strain-hardening capacity. Stage III hardening occurred after yielding in both base metal (BM) and welded samples. Dimple-like ductile fracture characteristics appeared in the BM, whereas some cleavage-like flat facets together with dimples and river marking were observed in the welded samples. Fatigue crack initiated from the specimen surface or near-surface defects, and crack propagation was characterized by the formation of fatigue striations along with secondary cracks.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. T.M. Pollock: Science, 2010, vol. 328, pp. 986-87.10.1126/science.1182848 ↗
2. M. Wise, K. Calvin, A. Thomson, L. Clarke, B. Bond-Lamberty, R. Sands, S.J. Smith, A. Janetos, and J. Edmonds: Science, 2009, vol. 324, pp. 1183-86.10.1126/science.1168475 ↗
3. L.R. Kump: Nature, 2002, vol. 419, pp 188-90.10.1038/nature01087 ↗
4. J.A. Patz, D. Campbell-Lendrum, T. Holloway, and J.A. Foley: Nature, 2005, vol. 438, pp. 310-17.10.1038/nature04188 ↗
5. E.A. Nyberg, A.A. Luo, K. Sadayappan, and W.F. Shi: Adv. Mater. Process., 2008, vol. 166, pp. 35-37.
6. S.R. Agnew: JOM, 2004, vol. 56, pp. 20-21.10.1007/s11837-004-0120-8 ↗
7. E.S. Ng and I.A. Watson: J. Laser Appl., 1999, vol. 11, pp. 273-78.10.2351/1.521903 ↗
8. P.S. Mohanty and J. Mazumder: Metall. Mater. Trans. A, 1998, vol. 45A, 1269-79.10.1007/s11663-998-0050-x ↗
9. S. Kou and Y. Le: Metall. Trans. A, 1985, vol. 16A, pp. 1887-96.10.1007/BF02670376 ↗
10. M. Rappaz, J.M. Vitek, S.A. David, and L.A. Boatner: Metall. Trans. A, 1993, vol. 24A, pp. 1433-46.10.1007/BF02668211 ↗
11. K. Somboonsuk, J.T. Mason, and R. Trivedi: Metall. Trans. A, 1984, vol. 15A, pp. 967-75.10.1007/BF02644688 ↗
12. S.H. Wu, J.C. Huang, and Y.N. Wang: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2455-69.10.1007/s11661-006-0226-4 ↗
13. Y. Liu, J. Koch, J. Mazumder, and K. Shibata: Metall. Trans. B, 1994, vol. 25B, pp. 425-34.10.1007/BF02663393 ↗
14. Q. Yajie, Z. Chen, Z. Yu, X. Gong, and M. Li: Mater. Charact., 2008, vol. 59, pp. 1799-804.10.1016/j.matchar.2008.05.001 ↗
15. L. Yu, K. Nakata, N, Yamamoto, and J. Liao: Mater. Lett., 2009, vol. 63, 870-72.10.1016/j.matlet.2009.01.050 ↗
16. Z.H. Yu, H.G. Yan, X.S. Gong, Y.J. Quan, J.H. Chen, and Q. Chen: Mater. Sci. Eng. A, 2009, vol. A523, pp. 220-25.10.1016/j.msea.2009.05.061 ↗
17. A. Weisheit, R. Galun, and B.L. Mordike: Weld. J., 1998, vol. 77, pp. 149-54.
18. H. Zhao and T. DebRoy: Weld. J., 2001, vol. 80, pp. 204-10.
19. Z. Sun, D. Pan, and J. Wei: Sci. Technol. Weld. Join., 2002, vol. 7, pp. 343-51.10.1179/136217102225006831 ↗
20. G. Padmanaban and V. Balasubramanian: Mater. Des., 2010, vol. 31, pp. 3724-32.10.1016/j.matdes.2010.03.013 ↗
21. H. Sun, G. Song, and L.F. Zhang: Sci. Technol. Weld. Join., 2008, vol. 13, pp. 305-11.10.1179/174329307X213846 ↗
22. S. Katayama, H. Nagayama, M. Mizutani, and Y. Kawahito: J. Light Met. Weld. Construct., 2008, vol. 46, pp. 470-79.
23. L. Quintino, A. Costa, R. Miranda, D. Yapp, V. Kumar, and C.J. Kong: Mater. Des., 2007, vol. 28, pp. 1231-37.10.1016/j.matdes.2006.01.009 ↗
24. J. Liu, J.H. Dong, and K. Shinozaki: Mater. Sci. Forum, 2009, vols. 610-3, pp. 911-14.10.4028/www.scientific.net/MSF.610-613.911 ↗
25. L. Yu, K. Nakata, and J. Liao: Sci. Technol. Weld. Join., 2009, vol. 14, pp. 554-58.10.1179/136217109X441209 ↗
26. G.F. Vander Voort: Metallography Principles and Practice, ASM International, Materials Park, OH, 1999.
27. ASTM Standard E8/E8M: 2008, “Standard Test Methods for Tension Testing of Metallic Materials,” ASTM International, West Conshohohocken, PA, 2008.
28. American Welding Society, Welding Handbook, 7th ed., vol. 1, American Welding Society, Miami, FL, 1976.
29. X.Z. Lin and D.L. Chen: J. Mater. Eng. Perform., 2008, vol. 17, pp. 894–901.10.1007/s11665-008-9247-z ↗
30. W.F. Savage, C.D. Lundin, and A.H. Aronson: Weld. J.,1965, vol. 44, pp. 175-81.
31. L. Xiao, L. Liu, Y. Zhou, and S. Esmaeili: Metall. Mater. Trans. A, 2010, vol. 41A, 1511-22.10.1007/s11661-010-0197-3 ↗
32. L. Liu, L. Xiao, J.C. Feng, Y.H. Tian, S.Q. Zhou, and Y. Zhou: Metall. Mater. Trans. A, in press.
33. A. Munitz: Metall. Trans. B, 1985, vol. 16B, pp. 149-61.10.1007/BF02657500 ↗
34. A.J. Paul and T. Debroy: Rev. Mod. Phys., 1995, vol. 67, pp. 85-112.10.1103/RevModPhys.67.85 ↗
35. S. Kou and Y. Le: Metall. Trans. A, 1982, vol. 13A, pp. 1141-52.10.1007/BF02645495 ↗
36. T.S. Plaskett and W.C. Winegard: Can. J. Appl. Physiol., 1960, vol. 38, 1077-88.
37. S. Kou: Welding Metallurgy, 2nd ed., Wiley, New York, NY, 2003.
38. Y. Kawahito, M. Mizutani, and S. Katayama: Trans. JWRI., 2007, vol. 36, pp. 11-16.
39. L.M. Liu, G. Song, and M.L. Zhu: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1702-11.10.1007/s11661-008-9533-2 ↗
40. P. Liu, Y.J. Li, H.R. Geng, and J.A. Wang: Mater. Lett., 2007, vol. 61, pp.1288-91.10.1016/j.matlet.2006.07.010 ↗
41. S.F. Su, J.C. Huang, H.K. Lin, and N.J. Ho: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1461-73.10.1007/s11661-002-0069-6 ↗
42. G. Padmanaban, V. Balasubramanian, and J.K. Sarin Sundar: JMPEG, 2010, vol. 19, no. 2, pp. 155-65.10.1007/s11665-009-9389-7 ↗
43. S.M. Chowdhury, D.L. Chen, S.D. Bhole, X. Cao, E. Powidajko, D.C. Weckman, and Y. Zhou: Mater. Sci. Eng. A, 2010, vol. A527, pp. 2951-61.10.1016/j.msea.2010.01.031 ↗
44. J.A. del Valle and O.A. Ruano: Scripta Mater., 2006, vol. 55, pp. 775-78.10.1016/j.scriptamat.2006.07.013 ↗
45. Y.V.R.K. Prasad and R.W. Armstrong: Phil. Mag., 1974, vol. 29, pp. 1421-25.10.1080/14786437408226196 ↗
46. H. Takuda, S. Kikuchi, N. Yoshida, and H. Okahara: Metall. Mater. Trans. A, 2003, vol. 44A, pp. 2266-70.
47. Y.M. Wang and E. Ma: Mater. Sci. Eng. A, 2004, vol. A375-A377, pp. 46-52.10.1016/j.msea.2003.10.214 ↗
48. J. Luo, Z. Mei, W. Tian, and Z. Wang: Mater. Sci. Eng. A, 2006, vol. A441, pp. 282-90.10.1016/j.msea.2006.08.051 ↗
49. N. Afrin, D.L. Chen, X. Cao, and M. Jahazi: Scripta Mater., 2007, vol. 57, pp. 1004-07.10.1016/j.scriptamat.2007.08.001 ↗
50. J.H. Hollomon: Trans. AIME, 1945, vol. 162, pp. 268-89.
51. J.A. del Valle, F. Carreno, and O.A. Ruano: Acta Mater., 2006, vol. 54, pp. 4247-59.10.1016/j.actamat.2006.05.018 ↗
52. C.W. Sinclair, W.J. Poole, and Y. Brechet: Scripta Mater., 2006, vol. 55, pp. 739-42.10.1016/j.scriptamat.2006.05.018 ↗
53. W. Pantleon: Mater. Sci. Eng. A, 2004, vols. A387–A389, pp. 257-61.10.1016/j.msea.2003.11.088 ↗
54. I. Kovacs, N.Q. Chinh, and E. Kovacs-Csetenyi: Phys. Status Solidi A, 2002, vol. 194, pp. 3-18.10.1002/1521-396X(200211)194:1<3::AID-PSSA3>3.0.CO;2-K ↗
55. U.F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171-273.10.1016/S0079-6425(02)00003-8 ↗
56. G.E. Dieter: Mechanical Metallurgy, S.I. Metric, ed., McGraw-Hill Columbus, OH, 1988.
57. K.S. Chan, P. Yi-Ming, D. Davidson, and R.C. McClung: Mater. Sci. Eng. A, 1997, vol. A222, pp. 1-8.
58. S. Begum, D.L. Chen, S. Xu, and A.A. Luo: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 3014-26.10.1007/s11661-008-9677-0 ↗
59. L. Wu, A. Jain, D.W. Brown, G.M. Stoica, S.R. Agnew, B. Clausen, D.E. Fielden, and P.K. Liaw: Acta Mater., 2008, vol. 56, pp. 688-95.10.1016/j.actamat.2007.10.030 ↗
60. X.Y. Lou, M. Li, R.K. Boger, S.R. Agnew, and R.H. Wagoner: Int. J. Plast., 2007, vol. 23, pp. 44-86.10.1016/j.ijplas.2006.03.005 ↗
61. S. Begum, D.L. Chen, S. Xu, and A.A. Luo: Int. J. Fatigue, 2009, vol. 31, pp. 726-35.10.1016/j.ijfatigue.2008.03.009 ↗
62. S. Begum, D.L. Chen, S. Xu, and A.A. Luo: Mater. Sci. Eng. A, 2009, vol. A517, nos. 1-2, pp. 334-43.10.1016/j.msea.2009.04.051 ↗