A Simplified Approach for Developing Constitutive Equations for Modeling and Prediction of Hot Deformation Flow Stress
Source abstract
Abstract
A comparative study was carried out on the appropriateness of hyperbolic sine, power, and exponential descriptions of Zener–Hollomon parameter (Z) in prediction of high-temperature flow stress by consideration of the effect of strain. It was shown that the main problem of the conventional strain compensation approach is the implementation of the constitutive equations to find the strain-dependent material constants, especially the hot deformation activation energy (Q), at constant strain values, which arises from the change in the microstructure of the material at a given strain for different deformation conditions (different Z values). Subsequently, a simplified approach for each constitutive equation, mainly by taking Q from the peak stress analysis, was proposed to solve this issue. This also resulted in significantly better prediction abilities for unseen deformation conditions and effectively simplified the required calculations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas: Prog. Mater. Sci., 2014, vol. 60, pp. 130-207.10.1016/j.pmatsci.2013.09.002 ↗
2. H. Mirzadeh and A. Najafizadeh: ISIJ Int., 2013, vol. 53, pp. 680-89.10.2355/isijinternational.53.680 ↗
3. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219-74.10.1016/S0921-5093(97)00424-3 ↗
4. H. Mirzadeh, J.M. Cabrera, and A. Najafizadeh: Acta Mater., 2011, vol. 59, pp. 6441-48.10.1016/j.actamat.2011.07.008 ↗
5. H. Mirzadeh, J.M. Cabrera, and A. Najafizadeh: Metall. Mater. Trans. A, 2012, vol. 43, pp. 108-23.10.1007/s11661-011-0836-3 ↗
6. Y.C. Lin and X.M. Chen: Mater. Des., 2011, vol. 32, pp. 1733-59.10.1016/j.matdes.2010.11.048 ↗
7. R. Liang and A.S. Khan: Int. J. Plast., 1999, vol. 15, pp. 963-80.10.1016/S0749-6419(99)00021-2 ↗
8. S. Nemat-Nasser, W.G. Guo, V.F. Nesterenko, S.S. Indrakanti, and Y.B. Gu: Mech. Mater., 2001, vol. 33, pp. 425-39.10.1016/S0167-6636(01)00063-1 ↗
9. H. Mirzadeh: Mech. Mater., 2014, vol. 77, pp. 80-85.10.1016/j.mechmat.2014.07.004 ↗
10. H. Mirzadeh: Mater. Chem. Phys., 2015, vol. 152, pp. 123-26.10.1016/j.matchemphys.2014.12.023 ↗
11. C.M. Sellars and W.J. McTegart: Acta Metall., 1966, vol. 14, pp. 1136-38.10.1016/0001-6160(66)90207-0 ↗
12. H. Mirzadeh: J. Magnesium Alloys, 2014, vol. 2, pp. 225-29.10.1016/j.jma.2014.09.003 ↗
13. H. Mirzadeh: Mater. Des., 2015, vol. 65, pp. 80-82.10.1016/j.matdes.2014.09.029 ↗
14. H. Mirzadeh, M.H. Parsa, and D. Ohadi: Mater. Sci. Eng. A, 2013, vol. 569, pp. 54-60.10.1016/j.msea.2013.01.050 ↗
15. H.J. McQueen and N.D. Ryan: Mater. Sci. Eng. A, 2002, vol. 322, pp. 43-63.10.1016/S0921-5093(01)01117-0 ↗
16. H. Mirzadeh, J.M. Cabrera, J.M. Prado, and A. Najafizadeh: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3876-82.10.1016/j.msea.2011.01.098 ↗
17. H. Mirzadeh and M.H. Parsa: J. Alloys Compd., 2014, 614, 56-59.10.1016/j.jallcom.2014.06.063 ↗
18. H. Mirzadeh: J. Mater. Eng. Perform., 2015, vol. 24, pp. 1095-99.10.1007/s11665-015-1389-1 ↗
19. H. Mirzadeh: Kovove Mater., 2015, vol. 53, pp. 105-11.10.4149/km_2015_2_105 ↗
20. H. Mirzadeh and A. Najafizadeh: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1160-64.10.1016/j.msea.2009.09.060 ↗
21. S. Mandal, V. Rakesh, P.V. Sivaprasad, S. Venugopal, and K.V. Kasiviswanathan: Mater. Sci. Eng. A, 2009, vol. 500, pp. 114-21.10.1016/j.msea.2008.09.019 ↗
22. Y. Han, G. Qiao, J.P. Sun, and D. Zou: Comput. Mater. Sci., 2013, vol. 67, pp. 93-103.10.1016/j.commatsci.2012.07.028 ↗
23. K.P. Rao and E.B. Hawbolt: J. Eng. Mater. Technol., 1992, vol. 114, pp. 116-23.10.1115/1.2904131 ↗
24. Y.C. Lin, M.S. Chen, J. Zhong: Comput. Mater. Sci., 2008, vol. 42, pp. 470-77.10.1016/j.commatsci.2007.08.011 ↗
25. G. Ji, F. Li, Q. Li, H. Li, and Z. Li: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4774-82.10.1016/j.msea.2011.03.017 ↗
26. F. Yin, L. Hua, H. Mao, and X. Han: Mater. Des., 2013, vol. 43, pp. 393-401.10.1016/j.matdes.2012.07.009 ↗
27. I. Rieiro, V. Gutiérrez, J. Castellanos, M. Carsí, M.T. Larrea, and O.A. Ruano: Metall. Mater. Trans. A, 2010, vol. 41, pp. 2396-407.10.1007/s11661-010-0259-6 ↗
28. D.H. Yu: Mater. Des., 2013, vol. 51, pp. 323-30.10.1016/j.matdes.2013.04.022 ↗
29. W. Li, H. Li, Z. Wang, and Z. Zheng: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4098-4103.10.1016/j.msea.2011.01.076 ↗
30. J. Li, F. Li, J. Cai, R. Wang, Z. Yuan, and G. Ji: Comput. Mater. Sci., 2013, vol. 71, pp. 56-65.10.1016/j.commatsci.2013.01.010 ↗
31. J. Cai, F. Li, T. Liu, B. Chen, and M. He: Mater. Des., 2011, vol. 32, pp. 1144-51.10.1016/j.matdes.2010.11.004 ↗
32. A.A. Khamei and K. Dehghani: J. Alloys Compd., 2010, vol. 490, pp. 377-81.10.1016/j.jallcom.2009.09.187 ↗
33. Z. Wang, L. Qi, J. Zhou, J. Guan, and J. Liu: Comput. Mater. Sci., 2011, vol. 50, pp. 2422-26.10.1016/j.commatsci.2011.03.020 ↗
34. H. Mirzadeh and A. Najafizadeh: Mater. Des., 2010, vol. 31, pp. 1174-79.10.1016/j.matdes.2009.09.038 ↗
35. H. Mirzadeh, J.M. Cabrera, A. Najafizadeh, and P.R. Calvillo: Mater. Sci. Eng. A, 2012, vol. 538, pp. 236-45.10.1016/j.msea.2012.01.037 ↗
36. D. Ponge and G. Gottstein: Acta Mater., 1998, vol. 46, pp. 69-80.10.1016/S1359-6454(97)00233-4 ↗
37. A. Dehghan-Manshadi, M.R. Barnett, and P.D. Hodgson: Mater. Sci. Eng. A, 2008, vol. 485, pp. 664-72.10.1016/j.msea.2007.08.026 ↗
38. H. Mirzadeh, A. Najafizadeh, and M. Moazeny: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2950-58.10.1007/s11661-009-0029-5 ↗
39. H. Mirzadeh and A. Najafizadeh: Mater. Des., 2010, vol. 31, pp. 4577-83.10.1016/j.matdes.2010.05.052 ↗
40. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, 1988.
41. H. Mirzadeh, M. Roostaei, M.H. Parsa, R. Mahmudi: Mater. Des., 2015, vol. 68, pp. 228-31.10.1016/j.matdes.2014.12.020 ↗
42. H. Mirzadeh, A. Najafizadeh, and M. Moazeny: Mater. Sci. Technol., 2010, vol. 26, pp. 501-04.10.1179/026708309X12468927349532 ↗
43. M. Zhan, Z. Chen, H. Zhang, and W. Xia: Mech. Res. Commun., 2006, vol. 33, pp. 508-14.10.1016/j.mechrescom.2005.05.008 ↗
44. Z. Zeng, S. Jonsson, and Y. Zhang: Mater. Sci. Eng. A, 2009, vol. 505, pp. 116-19.10.1016/j.msea.2008.11.017 ↗
45. J.C. Shao, B.L. Xiao, Q.Z. Wang, Z.Y. Ma, Y. Liu, and K. Yang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7865-72.10.1016/j.msea.2010.08.080 ↗