journal article·2016-12

Nanoindentation Creep Behavior of an Al0.3CoCrFeNi High-Entropy Alloy

Lijun Zhang, Pengfei Yu, Hu Cheng, Huan Zhang, Haoyan Diao, Yunzhu Shi, Bilin Chen, Peiyong Chen, Rui Feng, Jie Bai, Qin Jing, Mingzhen Ma, P. K. Liaw, Gong Li, Riping Liu

Publisher page

Abstract

Nanoindentation creep behavior was studied on a coarse-grained Al0.3CoCrFeNi high-entropy alloy with a single face-centered cubic structure. The effects of the indentation size and loading rate on creep behavior were investigated. The experimental results show that the hardness, creep depth, creep strain rate, and stress exponent are all dependent on the holding load and loading rate. The creep behavior shows a remarkable indentation size effect at different maximum indentation loads. The dominant creep mechanism is dislocation creep at high indentation loads and self-diffusion at low indentation loads. An obvious loading rate sensitivity of creep behavior is found under different loading rates for the alloy. A high loading rate can lead to a high strain gradient, and numerous dislocations emerge and entangle together. Then during the holding time, a large creep deformation characteristic with a high stress exponent will happen.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. J. W. Yeh, S. K. Chen, S. J. Lin, J. Y. Gan, T. S. Chin, T. T. Shun, C. H. Tsau, and S. Y. Chang: Advanced Engineering Materials, 2004, vol. 6, pp. 299-303.10.1002/adem.200300567 ↗
2. B. Cantor, I. T. H. Chang, P. Knight, and A. J. B. Vincent: Materials Science and Engineering: A, 2004, vol. 375, pp. 213-218.10.1016/j.msea.2003.10.257 ↗
3. Y. Zhang, T. T. Zuo, Z. Tang, C. G. Michael, K. A. Dahmen, P. K. Liaw, and Z. P. Lu: Progress in Materials Science, 2014, vol. 61, pp. 1-93.10.1016/j.pmatsci.2013.10.001 ↗
4. K. Zhao, X. X. Xia, H. Y. Bai, D. Q. Zhao, and W. H. Wang: Appl Phys Lett, 2011, vol. 98, pp. 141913.10.1063/1.3575562 ↗
5. S. Guo, Q. Hu, C. Ng, and C. T. Liu: Intermetallics, 2013, vol. 41, pp. 96-103.10.1016/j.intermet.2013.05.002 ↗
6. J.Y. He, H. Wang, H. L. Huang, X. D. Xu, M. W. Chen, Y. Wu, X.J. Liu, T.G. Nieh, K. An, and Z. P. Lu: Acta Materialia, 2016, vol. 102, pp. 187-196.10.1016/j.actamat.2015.08.076 ↗
7. B. Gludovatz, A. Hohenwarter, D. Catoor, E. H. Chang, E. P. George, and R. O. Ritchie: Science, 2014, vol. 345, pp.1153-1158.10.1126/science.1254581 ↗
8. O. N. Senkov, G. B. Wilks, D. B. Miracle, C. P. Chuang, and P. K. Liaw: Intermetallics, 2010, vol. 18(9), pp. 1758-1765.10.1016/j.intermet.2010.05.014 ↗
9. Z. Tang, T. Yuan, C. W. Tsai, J. W. Yeh, C. D. Lundin, and P. K. Liaw: Acta Materialia, 2015, vol. 99, pp. 247-258.10.1016/j.actamat.2015.07.004 ↗
10. M. H. Chuang, M. H. Tsai, W. R. Wang, S. J. Lin, and J. W. Yeh: Acta Mater, 2011, vol. 59, pp. 6308-6317.10.1016/j.actamat.2011.06.041 ↗
11. Y. Zhang, Y. J. Zhou, J. P. Lin, G. L. Chen, and P. K. Liaw: Advanced Engineering Materials, 2008, vol. 10(6), pp. 534-538.10.1002/adem.200700240 ↗
12. Y. Zhang, T.T. Zuo, Y.Q. Cheng, and P. K. Liaw: Scientific Reports, 2013, vol. 3.10.1038/srep01455 ↗
13. M. A. Hemphill, T. Yuan, G. Y. Wang, J. W. Yeh, C. W. Tsai, A. Chuang, and P. K. Liaw: Acta Materialia, 2012, vol. 60, pp. 5723-5734.10.1016/j.actamat.2012.06.046 ↗
14. M. Seifi, D. Li, Z. Yong, P. K. Liaw, and J. J. Lewandowski: JOM, 2015, vol. 67, pp. 2288-2295.10.1007/s11837-015-1563-9 ↗
15. Y. F. Kao, T. J. Chen, S. K. Chen, and J. W. Yeh: Journal of Alloys and Compounds, 2009, vol. 488, pp. 57-64.10.1016/j.jallcom.2009.08.090 ↗
16. W. R. Wang, W. L. Wang, and J. W. Yeh: Journal of Alloys and Compounds, 2014, vol. 589, pp. 143-152.10.1016/j.jallcom.2013.11.084 ↗
17. N. D. Stepanov, D. G. Shaysultanov, G. A. Salishchev, M. A. Tikhonovsky, E. E. Oleynik, A. S. Tortika, and O. N. Senkov,: Journal of Alloys and Compounds, 2015, vol. 628, pp. 170-185.10.1016/j.jallcom.2014.12.157 ↗
18. W. H. Liu, J. Y. He, H. L. Huang, H. Wang, Z. P. Lu, and C. T. Liu: Intermetallics, 2015, vol. 60, pp. 1-8.10.1016/j.intermet.2015.01.004 ↗
19. Y. J. Zhou, Y. Zhang, Y. L. Wang, and G. L. Chen: Appl. Phys. Lett, 2007, vol. 90, pp. 181904.10.1063/1.2734517 ↗
20. C.Y. Hsu, C.C. Juan, W.R. Wang, T.S. Sheu, J.W. Yeh, and S.K. Chen (2011) Mater. Sci. Eng. A, 528:3581-3588.10.1016/j.msea.2011.01.072 ↗
21. P. Koželj, S. Vrtnik, A. Jelen, S. Jazbec, Z. Jagličić, S. Maiti, M. Feuerbacher, W. Steurer, and J. Dolinšek: Phys. Rev. Lett, 2014, vol. 113, pp. 107001.10.1103/PhysRevLett.113.107001 ↗
22. S. Q. Wang: AIP Adv, 2013, vol. 3(10), pp. 842-852.
23. Y. F. Kao, S. K. Chen, J. H. Sheu, J. T. Lin, W. E. Lin, J. W. Yeh, S. J. Lin, T. H. Liou, and C. W. Wang: Int. J. Hydrogen Energy, 2010, vol. 35, pp. 9046-9059.10.1016/j.ijhydene.2010.06.012 ↗
24. V. Braic, M. Balaceanu, M. Braic, A. Viadescu, S. Panseri, and A. Russo (2012) J. Mechl Behav, Biomed. Mater, 10: 197-205.10.1016/j.jmbbm.2012.02.020 ↗
25. Z. H. Cao, P. Y. Li, H. M. Lu, Y. L. Huang, Y. C. Zhou, and X. K. Meng: Scripta Materialia, 2009, vol. 60, pp. 415-418.10.1016/j.scriptamat.2008.11.016 ↗
26. Y. J. Huang, J. Shen, Y. L. Chiu, J. J. J. Chen, and J. F. Sun: Intermetallics, 2009, vol. 17, pp. 190-194.10.1016/j.intermet.2008.09.014 ↗
27. Z. S. Ma, S. G. Long, Y. Pan, Y. C. Zhou: J Mater Sci, 2008, vol. 43, pp. 5952-5955.10.1007/s10853-008-2838-0 ↗
28. W.C. Oliver, G.M. Pharr: J. Mater. Res, 1992, vol. 7, pp. 1564-1583.10.1557/JMR.1992.1564 ↗
29. C. L. Wang, M. Zhang, and T. G. Nieh: J. Phys. D: Appl. Phys, 2009, vol. 42, pp. 115405.10.1088/0022-3727/42/11/115405 ↗
30. W. B. Li, J. L. Henshall, R. M. Hooper, and K. E. Easterling: Acta metallurgica et materialia, 1991, vol. 39, pp. 3099-3110.10.1016/0956-7151(91)90043-Z ↗
31. P. F. Yu, S. D. Feng, G. S. Xu, X. L. Guo, Y. Y. Wang, W. Zhao, L. Qi, G. Li, P. K. Liaw, and R. P. Liu: Scripta Materialia, 2014, vol. 90-91, pp. 45-48.
32. Z. S. Ma, S. G. Long, Y. C. Zhou, and Y. Pan: Scripta Materialia, 2008, vol. 59, pp. 195-198.10.1016/j.scriptamat.2008.03.014 ↗
33. F. Wang, P. Huang, and K. W. Xu: Appl. Phys. Lett., 2007, vol. 90, pp. 161921.10.1063/1.2730735 ↗
34. H. Li, A. H. W. Ngan: J. Mater. Res, 2004, vol. 19(2), pp. 513-522.10.1557/jmr.2004.19.2.513 ↗
35. S. R. Jian, G. J. Chen, and J. Y. Juang: Current Opinion in Solid State & Materials Science, 2010, vol. 14, pp. 69-74.10.1016/j.cossms.2009.11.002 ↗
36. S. J. Bull: J. Phys. D: Appl. Phys, 2005, vol. 38, pp. 393-413.10.1088/0022-3727/38/24/R01 ↗
37. J. E. Bradby, S. O. Kucheyev, J. S. Williams, J. Wong-Leung, M. V. Swain, P. Munroe, G. Li, and M. R. Phillips: Appl. Phys. Lett, 2002, vol. 80, pp. 383-385.10.1063/1.1436280 ↗
38. S. R. Jian: Journal of Alloys and Compounds, 2015, vol. 644, pp. 54-58.10.1016/j.jallcom.2015.04.203 ↗
39. T. T. Shun, C. H. Hung, and C. F. Lee: Journal of Alloys and Compounds. 2010, vol. 493, pp. 105-109.10.1016/j.jallcom.2009.12.071 ↗