journal article·2012-10Open access

Variant Selection During Cooling after Beta Annealing of Ti-6Al-4V Ingot Material

G. A. Sargent, K. T. Kinsel, A. L. Pilchak, A. A. Salem, S. L. Semiatin

Abstract

The selection of alpha variants during the cooling of Ti-6Al-4V from the beta-phase field was investigated. For this purpose, samples with a coarse, columnar beta-grain structure with a 〈100〉 fiber texture were extracted from an as-cast production-scale ingot. The alpha variants in the as-cast samples as well as those produced during several successive beta-annealing treatments were determined using electron backscatter diffraction (EBSD). The EBSD results indicated that a subset of the 12 possible variants was developed within each grain; the specific variants were a function of the cooling rate after beta heat treatment. Moreover, the generation of similar variants during successive heat treatments involving an identical cooling rate suggested a noticeable memory effect. The variant selection process was rationalized based on calculations of the strain associated with the beta-to-alpha transformation. These calculations revealed that the overall aggregate strain approached zero in both the as-cast condition as well as after beta heat treatment, suggesting the occurrence of a long-range self-accommodation mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. F. Larson and A. Zarkades: “Properties of Textured Titanium Alloys,” Report MCIC-74-20, Metals and Ceramics Information Center, Battelle Memorial Institute, Columbus, OH, 1974.10.21236/AD0781884 ↗
2. G. Luetjering and M. Peters: “Mechanical Properties of a Titanium Blading Alloy,” Report EPRI CS-2933, Electric Power Research Institute, Palo Alto, CA, 1983.
3. G. Luetjering: Mater. Sci. Eng. A, 1998, vol. A243, pp. 32–45.10.1016/S0921-5093(97)00778-8 ↗
4. U.F. Kocks, C.N. Tome, and H.R. Wenk, Texture and Anisotropy, Cambridge University Press, Cambridge, U.K., 1998.
5. S.L. Semiatin, M.G. Glavicic, S.V. Shevchenko, O.M. Ivasishin, Y.B. Chun, and S.K. Hwang: in ASM Handbook, Vol. 22A: Fundamentals of Modeling for Metals processing, D.U. Furrer and S.L. Semiatin, eds., in ASM International, Materials Park, OH, 2009, pp. 536–52.10.31399/asm.hb.v22a.a0005401 ↗
6. M. Peters and G. Luetjering: in Titanium ‘80: Science and Technology, H. Kimura and O. Izumi, eds., TMS, Warrendale, PA, 1980, pp. 925–35.
7. J.C. Williams and E.A. Starke, Jr.: in Deformation, Processing, and Structure, G. Krauss, ed., ASM International, Materials Park, OH, 1984, pp. 279–354.
8. Y.B. Chun, S.H. Yu, S.L. Semiatin, and S.K. Hwang: Mater. Sci. Eng. A, 2005, vol. A398, pp. 209–19.10.1016/j.msea.2005.03.019 ↗
9. Y.B. Chun, S.L. Semiatin, and S.K. Hwang: Acta Mater., 2006, vol. 54, pp. 3673–89.10.1016/j.actamat.2006.03.055 ↗
10. O.M. Ivasishin, S.V. Shevchenko, N.L. Vasiliev, and S.L. Semiatin: Acta Mater., 2003, vol. 51, pp. 1019–34.10.1016/S1359-6454(02)00505-0 ↗
11. O.M. Ivasishin, S.V. Shevchenko, N.L. Vasiliev, and S.L. Semiatin: Mater. Sci. Eng. A, 2006, vol. A433, pp. 216–32.10.1016/j.msea.2006.06.115 ↗
12. W.G. Burgers: Physica, 1934, vol. 1, pp. 561–86.10.1016/S0031-8914(34)80244-3 ↗
13. H. Moustahfid, N. Gey, M. Humbert, and M.J. Philippe: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 51–59.10.1007/s11661-997-0082-x ↗
14. S.L. Semiatin, P.N. Fagin, M.G. Glavicic, I.M. Sukonnik, and O.M. Ivasishin: Mater. Sci. Eng. A, 2001, vol. A299, pp. 225–34.10.1016/S0921-5093(00)01371-X ↗
15. N. Gey, M. Humbert, M.J. Philippe, and Y. Combres: Mater. Sci. Eng. A, 1996, vol. A219, pp. 80–88.10.1016/S0921-5093(96)10388-9 ↗
16. N. Gey, M. Humbert, M.J. Philippe, and Y. Combres: Mater. Sci. Eng. A, 1997, vol. A230, pp. 68–74.10.1016/S0921-5093(97)80111-6 ↗
17. S.V. Divinski, V.N. Dnieprenko, and O.M. Ivasishin: Mater. Sci. Eng. A, 1998, vol. A243, pp. 201–05.10.1016/S0921-5093(97)00801-0 ↗
18. M. Humbert, L. Germaine, N. Gey, P. Bocher, and M. Jahazi: Mater. Sci. Eng. A, 2006, vol. A430, pp. 157–64.10.1016/j.msea.2006.05.047 ↗
19. L. Zeng and T.R. Bieler: Mater. Sci. Eng. A, 2005, vol. A392, pp. 403–14.10.1016/j.msea.2004.09.072 ↗
20. D. Bhattacharyya, G.B. Viswanathan, R. Denkenberger, D. Furrer, and H.L. Fraser: Acta Mater., 2003, vol. 51, pp. 4679–91.10.1016/S1359-6454(03)00179-4 ↗
21. N. Stanford and P.S. Bate: Acta Mater., 2004, vol. 52, pp. 5215–24.10.1016/j.actamat.2004.07.034 ↗
22. I. Lischewski and G. Gottstein: Acta Mater., 2011, vol. 59, pp. 1530–41.10.1016/j.actamat.2010.11.017 ↗
23. A.W. Bowen: Mater. Sci. Eng., 1977, vol. 29, pp. 19–28.10.1016/0025-5416(77)90141-0 ↗
24. I. Lonardelli, N. Gey, H.-R. Wenk, M. Humbert, S.C. Vogel, and L. Lutterotti: Acta Mater., 2007, vol. 55, pp. 5718–27.10.1016/j.actamat.2007.06.017 ↗
25. J. Romero, M. Preuss, and J. Quinta da Fonseca: Acta Mater., 2009, vol. 57, pp. 5501–11.10.1016/j.actamat.2009.07.046 ↗
26. M.R. Daymond, R.A. Holt, S. Cai, P. Mosbrucker, and S.C. Vogel: Acta Mater., 2010, vol. 58, pp. 4053–66.10.1016/j.actamat.2010.03.012 ↗
27. M.G. Glavicic, P.A. Kobryn, F. Spadafora, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A346, pp. 8–18.10.1016/S0921-5093(02)00525-7 ↗
28. A.R. Shiveley, P.A. Shade, A.L. Pilchak, J.S. Tiley, and R. Kerns: J. Microscopy, 2011, vol. 244, no. 2, pp. 181–86.10.1111/j.1365-2818.2011.03524.x ↗
29. A.L. Pilchak, A.R. Shiveley, J.S. Tiley, and D.L. Ballard: J. Microscopy, 2011, vol. 244, no. 1, pp. 38–44.10.1111/j.1365-2818.2011.03496.x ↗
30. M. Humbert, H. Moustahfid, F. Wagner, and M.J. Philippe: Mater. Sci. Forum, 1994, vol. 157, pp. 1225–30.10.4028/www.scientific.net/MSF.157-162.1225 ↗
31. M. Humbert, F. Wagner, H. Moustahfid, and C. Esling: J. Appl. Cryst., 1995, vol. 28, pp. 571–76.10.1107/S0021889895004067 ↗
32. M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A346, pp. 50–59.10.1016/S0921-5093(02)00535-X ↗
33. M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A351, pp. 258–64.10.1016/S0921-5093(02)00844-4 ↗
34. A.L. Pilchak and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 773–94.10.1007/s11661-010-0434-9 ↗
35. A. Kelly, G.W. Groves, and P. Kidd: Crystallography and Crystal Defects, Wiley, West Sussex, U.K., 2000.
36. C. Leyens and M. Peters: Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-VCH, Weinheim, Germany, 2003.10.1002/3527602119 ↗
37. J.W. Elmer, T.A. Palmer, S.S. Babu, and E.D. Specht: Mater. Sci. Eng. A, 2005, vol. A391, pp. 104–13.10.1016/j.msea.2004.08.084 ↗
38. S.L. Semiatin, J.C. Soper, and I.M. Sukonnik: Acta Metall. Mater., 1996, vol. 44, pp. 1979–86.10.1016/1359-6454(95)00311-8 ↗
39. S.C. Wang, M. Aindow, and M.J. Starink: Acta Mater., 2003, vol. 51, pp. 2485–503.10.1016/S1359-6454(03)00035-1 ↗
40. Y. Wang, N. Ma, Q. Chen, F. Zang, S.-L. Chen, and Y.A. Chang: JOM, 2005, vol. 57, no. 9, pp. 32–39.10.1007/s11837-005-0112-3 ↗