journal article·2004-01

Charpy-impact-toughness prediction using an “effective” grain size for thermomechanically controlled rolled microalloyed steels

D. Bhattacharjee, J. F. Knott, C. L. Davis

Publisher page

Abstract

Thermomechanically controlled rolling of steel plate can involve substantial straining in the intercritical temperature region, which may result in the final ferrite grains not fully recrystallizing, and, hence, the presence of low-angle grain boundaries. It is shown in this article that a Nb-microalloyed thermomechanically controlled rolled (TMCR) steel can contain a high proportion of low-angle grain boundaries (the extent depending on the thermomechanically controlled rolling schedule) and that during toughness testing, the crack front ignores boundaries with less than a 12 deg misorientation. Thus, the average microstructural unit experienced by the crack front (i.e., the cleavage facet) is significantly larger than the average metallographic, two-dimensional grain size. Consequently, use of the metallographic grain size gives a poor prediction of the impact transition temperature (ITT) and fracture stress for these steels. It is also shown that the micromechanism of crack initiation and propagation involves grain-boundary carbides and groups of closely aligned grains that act as single “effective” grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. K.J. Irvine, F.B. Pickering, and T. Gladman: J. Iron Steel Inst., 1967, vol. 205, p. 161.
2. J.H. Bucher, J.D. Grozier, and J.F. Enrietta: in Fracture—an Advanced Treatise, H. Liebowitz, ed., Academic Press, New York, NY, 1969, vol. VI, pp. 247–98.
3. W.E. Duckworth and J.D. Baird: J. Iron Steel Inst., 1969, vol. 207, p. 854.
4. B. Mintz, W.B. Morrison, and R.C. Cochrane: Advances in Physical Metallurgy and Applications of Steel, Proc. Conf., University of Liverpool, Liverpool, Sept. 1981, TMS, Warrendale, PA, 1982, pp. 222–28.
5. M.T. Shehata and J.D. Boyd: Advances in Physical Metallurgy and Applications of Steel, Proc. Conf., University of Liverpool, Liverpool, Sept. 1981, TMS, Warrendale, PA, 1982, pp. 229–36.
6. F.B. Pickering and T. Gladman: ISI Spec. Rep., 1961, p. 81.
7. G.R. Speich and D.S. Dabkowski: in The Hot Deformation of Austenite, J. Balance, ed., TMS-AIME, New York, NY, 1977, pp. 233–49.
8. G.J. Baczynski, J.J. Jonas, and L.E. Collins: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3045–54.10.1007/s11661-999-0215-5 ↗
9. E. Bouyne, H.M. Flower, T.C. Lindley, and A. Pineau: Scripta Mater., 1998, vol. 39, pp. 295–300.10.1016/S1359-6462(98)00170-5 ↗
10. M.-C. Kim, Y.J. Oh, and J.H. Hong: Scripta Mater., 2000, vol. 43, pp. 205–11.10.1016/S1359-6462(00)00392-4 ↗
11. D. Bhattacharjee, C.L. Davis, and J.F. Knott: TMS/ASM John Knott Symp.: Mechanisms and Mechanics of Fracture, Columbus, OH, 2002, W.O. Sobeyejo, J.J. Lewandowski, and R.O. Ritchie, eds., TMS, Warrendale, PA, 2002, pp. 175–86.
12. J.R. Griffith and D.R.J. Owen: J. Mech. Phys. Solids, 1971, vol. 19, pp. 419–31.10.1016/0022-5096(71)90009-3 ↗
13. D. Bhattacharjee and C.L. Davis: Scripta Mater., 2002, vol. 47, pp. 825–31.10.1016/S1359-6462(02)00324-X ↗
14. J.J. Muirhead: Ph.D. Thesis, Sheffield Hallam University, Sheffield, United Kingdom, 2001.
15. D. Bhattacharjee and C.L. Davis: Proc. Conf. Int. Symp. on Microalloyed Steels, Columbus, OH, Oct. 7–10, 2002, R.I. Asfahani, R.L. Bodnar, and M.J. Merwin, eds., ASM INT, Metals Park, OH, 2002, pp. 101–08.
16. D. Bhattacharjee and C.L. Davis: Proc. Conf. 11th Int. Metallurgy & Materials Conf., Instanbul, Turkey, June 5–8, 2002, UCEAT, C.H. Gur and I. Kapati, eds., 2002, pp. 79–87.
17. B. Mintz, W.B. Morrison, and A. Jones: Met. Technol., 1979, vol. 6, p. 252.10.1179/030716979803276246 ↗
18. C.L. Davis and M. Strangwood: J. Mater. Sci., 2002, vol. 37, pp. 1083–90.10.1023/A:1014342800399 ↗
19. B. Mintz, G. Peterson, and A. Nassar: Ironmaking and Steelmaking, 1994, vol. 21, pp. 215–22.
20. N.J. Petch: Phil. Mag., 1958, vol. 3, p. 1089.10.1080/14786435808237038 ↗
21. A.H. Cottrell: Fracture, Wiley, New York, NY, 1959, vol. 20.
22. N.P. Allen, W.P. Rees, B.E. Hopkins, and H.R. Tipler: J. Iron Steel Inst., 1965, vol. 174, p. 108.
23. C.J. McMahon and M. Cohen: Acta Metall., 1965, vol. 13, p. 581.10.1016/0001-6160(65)90121-5 ↗
24. G.T. Hahn, M. Cohen, and B.L. Averbach: Acta Metall., 1962, vol. 11, p. 634.
25. E. Smith: Proc. Conf. on “Physical Basis of Yield and Fracture,” Institute of Physics and Physical Society, Oxford, United Kingdoms, 1966, p. 36.
26. E.A. Almond, D.H. Timbers, and J.D. Embury: Proc. Conf. “Fracture,” Academic Press, London, 1969, vol. 6, p. 21.
27. Tsann Lin, A.G. Evans, and R.O. Ritchie: Metall. Trans. A, 1987, vol. 18A, pp. 641–51.
28. R. Nuismer: Int. J. Fract., 1975, vol. 11, pp. 245–50.10.1007/BF00038891 ↗
29. H. Hou, H. Gao, Q. Liu, H. Dong, and Y. Wang: Proc. Conf. 42nd MWSP, Toronto, ISS, Warrendale, PA, vol. XXXVIII, 2000, pp. 495–503.