Inertia Friction Welding Dissimilar Nickel-Based Superalloys Alloy 720Li to IN718
Source abstract
Abstract
This article describes a comprehensive microstructural characterization of an inertia friction welded joint between nickel-based superalloys 720Li and IN718. The investigation has been carried out on both as-welded and postweld heat-treated conditions. The detailed metallographic analysis has enabled the relation of hardness profiles across inertia-welded alloy 720Li to IN718 and morphological changes of the precipitates present. The work demonstrates that inertia friction welding (IFW) 720Li to IN718 results in a weld free of micropores and microcracks and no significant chemical migration across the weld line. However, substantial differences in terms of grain structure and precipitation phase distribution variations are observed on each side of the dissimilar weld. The high γ′ volume fraction alloy 720Li exhibits a wider heat-affected zone than the mainly γ″ strengthened IN718. Alloy 720Li displays only a small hardness trough near the weld line in the as-welded condition due to the depletion of γ′, while γ″-strengthened IN718 shows a soft precipitation-free weld region. Postweld heat treatment (PWHT) of the dissimilar weld at 760 °C, a typical annealing temperature for alloy 720Li, results in an overmatch of the heat-affected zone in both sides of the weld. The comparison of the as-welded and postweld heat-treated condition also reveals that IN718 is in an overaged condition after the stress relief treatment. © The Minerals, Metals & Materials Society and ASM International 2007.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. R. Vincent: Acta Metall., 1985, vol. 33, pp. 1205–1610.1016/0001-6160(85)90231-7 ↗
2. A. Lingenfelter: in Superalloy 718—Metallurgy and Applications, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 673–8310.7449/1989/Superalloys_1989_673_683 ↗
3. S. Gobbi, Li Zhang, J. Norris, K.H. Richter, J.H. Loreau: J. Mater. Proc. Technol., 1996, vol. 56, pp. 333–4510.1016/0924-0136(95)01847-6 ↗
4. R.G. Thompson, B. Radhakrishnan, and D.E. Mayo: in Superalloy 718—Metallurgy and Applications, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 437–5510.7449/1989/Superalloys_1989_437_455 ↗
5. B. Radhakrishnan, R.G. Thompson: Metall. Trans. A, 1993, vol. 24A, pp. 1409–2210.1007/BF02668209 ↗
6. M. Qian, J.C. Lippold: Acta Mater., 2003, vol. 51, pp. 3351–6110.1016/S1359-6454(03)00090-9 ↗
7. O.A. Ojo, N.L. Richards, M.C. Chaturvedi: Scripta Mater., 2004, vol. 51, pp. 683–8810.1016/j.scriptamat.2004.06.013 ↗
8. N.C. Sekhar, R.C. Reed: Sci. Technol. Weld. Join., 2002, vol. 7, pp. 77–8710.1179/136217102225002628 ↗
9. K.K. Wang: Weld. Res. Counc. Bull., 1975, No. 204, pp. 1–22
10. R. Spinat and Y. Honnorat: in High Temperature Alloys for Gas Turbines and Other Applications, W. Betz, R. Brunetaud, D. Coutsouradis, H. Fischmeister, T.B. Gibbons, I. Kvernes, Y. Lindblom, J.B. Marriott, and D.B. Meadowcroft, eds., Dordrecht D. Reidel, Butterworth-Heinemann, Ltd., Oxford, 1986, pp. 151–57
11. J.C. Williams, E.A. Starke Jr.: Acta Mater., 2003, vol. 51, pp. 5775–9910.1016/j.actamat.2003.08.023 ↗
12. M. Preuss, J.W.L Pang, P.J. Withers, G.J. Baxter: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3215–2510.1007/s11661-002-0307-y ↗
13. M. Preuss, J. Quinta da Fonseca, I. Kyriakoglou, P.J. Withers, and G.J. Baxter: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.F. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS Warrendale, PA, 2004, pp. 477–8410.7449/2004/Superalloys_2004_477_484 ↗
14. M. Preuss, J.W.L. Pang, P.J. Withers, G.J. Baxter: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3227–3410.1007/s11661-002-0308-x ↗
15. J.W.L. Pang, M. Preuss, P.J. Withers, G.J. Baxter, C. Small: Mater. Sci. Eng. A, 2003, vol. A356, pp. 405–1310.1016/S0921-5093(03)00153-9 ↗
16. M. Soucail, Y. Bienvenu: Mater. Sci. Eng. A, 1996, vol. A220, pp. 215–2210.1016/S0921-5093(97)80011-1 ↗
17. M.P. Jackson, R.C. Reed: Mater. Sci. Eng. A, 1999, vol. A259, pp. 85–9710.1016/S0921-5093(98)00867-3 ↗
18. Software and user manual at http://www.umist.ac.uk/material/reserach/aluminum/ frame.html
19. D.U. Furrer, H.-J. Fecht: Scripta Mater., 1999, vol. 40, pp. 1215–2010.1016/S1359-6462(99)00094-9 ↗
20. L. Wang, M. Preuss, P.J Withers, G. Baxter, P. Wilson: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 513–2310.1007/s11663-005-0043-y ↗
21. J.W. Brooks: Mater. Des., 2000, vol. 21, pp. 297–30310.1016/S0261-3069(99)00069-2 ↗
22. D.R. Muzyka, G.N. Maniar: Metals Engineering Quarterly, ASM, Cleveland, OH, 1969, pp. 23–37
23. D.J. Wilson: Trans. ASME, 1973, Apr., pp. 112–23
24. H.F. Merrick: Metall. Trans. A, 1976, vol. 7A, pp. 505–1410.1007/BF02643966 ↗
25. M. Karadge, G. Regino, A. Hoerling, A. Korsunsky, P.J. Withers, D. Nowell, and M. Preuss: Manchester Materials Science Centre, University of Manchester, Manchester, United Kingdom, unpublished research, 2006
26. R.A. Ricks, A.J. Porter, R.C. Ecob: Acta Metall., 1983, vol. 31, pp. 43–5310.1016/0001-6160(83)90062-7 ↗
27. R. Couturier, H. Burlet, S. Terzi, S. Dubitiez, L. Guetaz, and G. Raisson: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.F. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 351–5910.7449/2004/Superalloys_2004_351_359 ↗
28. F. Torster, G. Baumeister, J. Albrecht, G. Luetjering, D. Helm, M.A. Daeubler: Mater. Sci. Eng. A, 1997, vol. A234, pp. 189–9210.1016/S0921-5093(97)00161-5 ↗
29. D.F. Paulonis, J.M. Oblak, D.S. Duvall: Trans. ASM, 1969, vol. 62, pp. 611–22
30. R. Cozar, A. Pineau: Metall. Trans., 1973, vol. 4, pp. 47–5910.1007/BF02649604 ↗
31. J.M. Oblak, D.F. Paulonis, D.S. Duvall: Metall. Trans., 1974, vol. 5, pp. 143–5310.1007/BF02644342 ↗
32. J.F. Collier, S.H. Wong, J.C. Phillips, J.K. Tien: Metall. Trans. A, 1988, vol. 19A, pp. 1657–6610.1007/BF02645133 ↗