Microstructure and Creep Behavior of High-Pressure Die-Cast Magnesium Alloy AE44
Source abstract
Abstract
The microstructure and creep behavior of a high-pressure die-cast AE44 (Mg-4Al-4RE) alloy have been studied. The creep properties were evaluated at 423 K and 448 K (150 °C and 175 °C) under stresses in the range 90 to 110 MPa. The microstructures before and after creep were examined by transmission electron microscopy (TEM). After creep, AE44 exhibits anomalously high stress exponents (n = 67 at 423 K [150 °C] and n = 41 at 448 K [175 °C]) and stress-dependant activation energies ranging from 221 to 286 kJ/mol. The dislocation substructure developed during creep is characterized by extensive nonbasal slip and isolated but well-defined subgrain boundaries. It is shown that the anomalously high stress exponents cannot be rationalized by the threshold stress approach that is commonly adopted in analyzing the creep behavior of dispersion-strengthened alloys or metal matrix composites. A comparison in creep resistance is also made between AE44 and AE42 (Mg-4Al-2RE).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. P. Humble: Mater. Forum, 1997, vol. 21, pp. 45–56.
2. T.K. Aune and T.J. Ruden: SAE Trans.: J. Mater. Manuf., 1992, vol. 101, pp. 1–7.
3. G. Pettersen, H. Westengen, R. Hoier, and O. Lohne: Mater. Sci. Eng. A, 1996, vol. A207, pp. 115–20.10.1016/0921-5093(95)10035-0 ↗
4. M.O. Pekguleryuz and E. Baril: in Magnesium Technology 2001, J. Hryn, ed., TMS, Warrendale, PA, 2001, pp. 119–25.10.1002/9781118805497.ch22 ↗
5. E. Baril, P. Labelle, and M.O. Pekguleryuz: JOM, 2003, vol. 55, no. 11, pp. 34–39.10.1007/s11837-003-0207-7 ↗
6. B.R. Powell, V. Rezhets, A.A. Luo, and B.L. Tiwari: SAE Trans.: J. Mater. Manuf., 2001, vol. 110, pp. 406–13.
7. P. Bakke and H. Westengen: in Magnesium Technology 2005, N.R. Neelameggham, H.I. Kaplan, and B.R. Powell, eds., TMS, Warrendale, PA, 2005, pp. 291–95.
8. P. Bakke, A.L. Bowles, and H. Westengen: in Proc. 7th Int. Conf. on Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH, Weinheim, Germany, 2006, pp. 55–66.
9. E.G. Sieracki, J.J. Velazquez, and K. Kabiri: SAE Trans.: J. Mater. Manuf., 1996, vol. 105, pp. 553–57.
10. B.R. Powell, V. Rezhets, M.P. Balogh, and R.A. Waldo: JOM, 2002, vol. 54, no. 8, pp. 34–38.10.1007/BF02711864 ↗
11. S.M. Zhu, M.A. Gibson, J.F. Nie, M.A. Easton, and T.B. Abbott: Scripta Mater., 2008, vol. 58, pp. 477–80.10.1016/j.scriptamat.2007.10.041 ↗
12. J. Zhang, K. Liu, D. Fang, X. Qiu, D. Tang, and J. Meng: J. Mater. Sci., 2009, vol. 44, pp. 2046–54.10.1007/s10853-009-3283-4 ↗
13. S. Spigarelli, E. Evangelista, M. Cabibbo, M. El Mehtedi: in Magnesium Technology 2007, R.S. Beals, A.A. Luo, N.R. Neelameggham, and M.O. Pekguleryuz, eds., TMS, Warrendale, PA, 2007, pp. 401–405.
14. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, Pergamon Press, Oxford, U.K., 1982, p. 328.
15. K.T. Park, E. Lavernia, and F. Mohamed: Acta Metall. Mater., 1994, vol. 42, pp. 667–78.10.1016/0956-7151(94)90264-X ↗
16. Z.Y. Ma and S.C. Tjong: Compos. Sci. Technol., 2001, vol. 61, pp. 771–86.10.1016/S0266-3538(01)00018-5 ↗
17. Y. Li and T.G. Langdon: Scripta Mater., 1997, vol. 36, pp. 1457–60.10.1016/S1359-6462(97)00041-9 ↗
18. H. Dieringa, N. Hort, and K.U. Kainer: Mater. Sci. Eng. A, 2009, vols. A510–A511, pp. 382–86.10.1016/j.msea.2008.06.051 ↗
19. A.K. Mondal and S. Kumar: Compos. Sci. Technol., 2008, vol. 68, pp. 3251–58.10.1016/j.compscitech.2008.08.007 ↗
20. K. Maruyama, M. Suzuki, and H. Sato: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 875–82.10.1007/s11661-002-0157-7 ↗
21. A. Yawny and G. Eggeler: Mater. Sci. Eng. A, 2004, vols. A387–A389, pp. 382–86.
22. S.S. Vagarali and T.G. Langdon: Acta Metall., 1981, vol. 29, pp. 1969–82.10.1016/0001-6160(81)90034-1 ↗
23. S.M. Zhu, M.A. Gibson, J.F. Nie, M.A. Easton, and P. Bakke: in Magnesium Technology 2008, M. Pekguleryuz, E. Nyberg, R.S. Beals, and N. Neelameggham, eds., TMS, Warrendale, PA, 2008, pp. 437–42.
24. S.M. Zhu, M.A. Gibson, M.A. Easton, and J.F. Nie: Scripta Mater., 2010, vol. 63, pp. 698–703.10.1016/j.scriptamat.2010.02.005 ↗
25. A. Suzuki, N.D. Saddock, J.R. TerBush, B.R. Powell, J.W. Jones, and T.M. Pollock: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 696–702.10.1007/s11661-007-9455-4 ↗
26. S.M. Zhu, M.A. Gibson, J.F. Nie, M.A. Easton, M.S. Dargusch, and P. Bakke: in Proc. 8 th Int. Conf. on Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH, Weinheim, Germany, 2009, pp. 231–37.
27. A.A. Nayeb-Hashemi and J.B. Clark: Phase Diagrams of Binary Magnesium Alloys, ASM International, Materials Park, OH, 1988.