journal article·2005-04

Nucleation of Fe-intermetallic phases in the Al-Si-Fe alloys

W. Khalifa, F. H. Samuel, GM-NSERC-UQAC, J. E. Gruzleski, H. W. Doty, S. Valtierra

Publisher page

Abstract

Nucleation of Fe-intermetallic phases (i.e. binary Al-Fe, α-AlFeSi, β-AlFeSi, δ-AlFeSi, and q1-AlFeSi phases) on the surface of different inclusions in six experimental Al-Si-Fe alloys was studied through a quantitative evaluation of the number of inclusion particles that have a direct physical contact with the nucleated phase as seen through the optical microscope. It was found that nucleation of each of the Fe-intermetallic phases was promoted on the surface of several inclusions under the same conditions of alloy composition and cooling rates. Some inclusions exhibited high potency for the nucleation of particular Fe-intermetallic phases under certain conditions and poor potency under other conditions. The potent nucleants for the primary α-Al phase such as γ-Al2O3 exhibited poor potency for the nucleation of the Fe-intermetallic particles that lie within the primary phase (intragranular particles). Reactive inclusions such as CaO and SiC are very potent nucleants for the intragranular Fe-intermetallic phase particles. The nucleation of the Fe-intermetallic phases in Al-Si-Fe alloys obeys the general features of nucleation, in particular, the effect of cooling rate and solute concentration on the potency of the nucleant particles: (1) it was observed that increasing the cooling rate enhances the heterogeneous nucleation of the Fe-intermetallic phases on the surface of different inclusions, and (2) the nucleation potency of inclusion particles in both α-Al and interdendritic regions improves with increasing solute concentration up to a certain level. Above this level, the solute concentration poisons the nucleation sites. Nucleation of the Fe-intermetallics in the alloys studied does not seem to be largely affected by the type of the nucleating surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. L. Narayanan, F.H. Samuel, and J.E. Gruzleski: Metall. Mater. Trans., A 1994, vol. 25A, pp. 1761–73.10.1007/BF02668540 ↗
2. J. Hatch: Aluminum, Properties and Physical Metallurgy, ASM, Metals Park, OH, 1984, pp. 279.
3. C.J. Simensen and G. Berg: Aluminium, 1980, vol. 56, pp. 335–40.
4. Metallographic Evaluation Reports for Prefil, ABB Bomem, Quebec (QC), Canada, Jan, 2001.
5. I. Maxwell and A. Hellawell: Metall. Trans., 1972, vol. 3, pp. 1487–93.10.1007/BF02643037 ↗
6. C. Eckert: Modern Casting, 1991, Apr., pp. 28–30.10.1080/03031853.1991.9524227 ↗
7. J.K. Kim and P.K. Rohatgi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1295–1304.10.1007/s11661-000-0124-0 ↗
8. P.K. Rohatgi, R. Asthana, and F. Yardi: Solidification of Metal Matrix Composites, P. Rohatgi, ed., TMS, Warrendale, PA, 1990, pp. 51–75.
9. L. Narayanan, F.H. Samuel, and J.E. Gruzleski: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1761–73.10.1007/BF02668540 ↗
10. M.W. Meredith, A.L. Greer, and P.V. Evans: in Light Metals 1998, B. Welch, ed., TMS, Warrendale, PA, 1998, pp. 977–82.
11. B.J. Mckay, P. Cizek, P. Schumacher, and A.Q. O’Reilly: in Light Metals 2000, R. Peterson, ed., TMS, Warrendale, PA, 2000, pp. 833–38.
12. C.M. Allen, K.A.Q. O’Reilly, B. Cantor, and P.V. Evans: Progr. Mater. Sci., 1998, vol. 43, pp. 89–170.10.1016/S0079-6425(98)00003-6 ↗
13. C.M. Allen, K.A.Q. O’Reilly, P.V. Evans, and B. Cantor: Acta Mater., 1999, vol. 47, pp. 4387–4403.10.1016/S1359-6454(99)00250-5 ↗
14. P.S. Mohanty, F.H. Samuel, and J.E. Gruzleski: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 103–09.10.1007/BF02648983 ↗
15. W. Khalifa, F. Samuel, and J. Gruzleski: Proc. Int. Symp. on Light Metals 2002, Aug. 11–14, 2002, TMS-CIM, pp. 285–303.
16. W. Khalifa, F. Samuel, and J. Gruzleski: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 807–825.10.1007/s11661-003-1009-9 ↗
17. W. Khalifa, Ph.D. Thesis, University of Quebec at Chicoutimi, Chicoutimi, Canada, 2003, pp. 102–286.
18. W. Khalifa, F.H. Samuel, and J.E. Gruzleski: Metall Mater. Trans. A, 2004, vol. 35A, pp. 3233–50.10.1007/s11661-004-0067-y ↗
19. C.M. Allen, K.A.Q. O’Reilly, and B. Cantor: Acta Mater., 2001, vol. 49, pp. 1549–63.10.1016/S1359-6454(01)00056-8 ↗
20. P.V. Evans, J. Worth, A. Bosland, and S.C. Flood: Solidification Processing, Sheffield, United Kingdom, 1997, pp. 531–36.
21. H. Kosuge: J. Jn. Inst. L. Met., 1984, vol. 24, pp. 4–10.
22. A. Griger, V. Stefaniay, Al Lendvai, and T. Turmezey: Aluminium, 1989, vol. 10, pp. 1049–1056.
23. H. Tesuka and A. Kamio: Proc. Int. Conf. Aluminum Alloys, The Norwegian Institute of Technology, Trondheim, Norway, June 22–26, 1992, vol. 1, p. 117.
24. S.J. Maggs, R.F. Cochrance, S.C. Flood, and P.V. Evans: Symp. Shape Casting Technology VI, Vertical Casting and Microstructural Development 2, TMS Annual Meeting, Las Vegas, NV. 1995.
25. M.W. Meredith, A.L. Greer, and P.V. Evans: Solidification Processing, Sheffield, United Kingdom, 1997, pp. 541–45.
26. I. Maxwell and A. Hellawell: Acta Metall., 1975, vol. 23, pp. 229–37.10.1016/0001-6160(75)90188-1 ↗
27. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, Chapman & Hall, London, 1992, pp. 192–97.10.1007/978-1-4899-3051-4 ↗
28. J. Gruzleski and B. Closset: The Treatment of Liquid Aluminum-Silicon Alloys, The American Foundrymen’s Society Inc., Des Plaines, IL, 1990, pp. 132–37.
29. D.G. McCartney: Int. Mater. Rev., 1989, vol. 34, pp. 247–60.10.1179/imr.1989.34.1.247 ↗
30. M. Johnsson: Acta Thermochimica, 1995, vol. 256, pp. 107–21.10.1016/0040-6031(94)02167-M ↗
31. D. Turnbull and B. Vonnegut: Industrial Eng. Chem., 1952, vol. 44, pp. 1292–98.10.1021/ie50510a031 ↗
32. D.L. Zhang and B. Cantor: Acta Metall. Mater., 1992, vol. 40, pp. 2951–60.10.1016/0956-7151(92)90459-R ↗
33. M.E. Glicksman and W.J. Childs: Acta Metall., 1962, vol. 10, pp. 925–33.10.1016/0001-6160(62)90142-6 ↗
34. B. Cantor and K.Q. O’Reilly: Curr. Opin. Solid State Mater. Sci., 1997, vol. 2, pp. 318–23.10.1016/S1359-0286(97)80122-2 ↗
35. J. Perepezko: Metals Handbook, 9th ed., ASM, Metals Park, OH, 1992, vol. 15, pp. 101–08.
36. W.D. Donnelly and M.L. Rudee: 1964; cited by C.M. Allen, K.A.Q. O’Reilly, B. Cantor, and P.V. Evans: Progr. Mater. Sci., 1998, vol. 43, pp. 89–170.10.1016/S0079-6425(98)00003-6 ↗
37. L. Ping and G.L. Dunlop: 1988, cited by C.M. Allen, K.A.Q. O’Reilly, B. Cantor, and P.V. Evans: Progr. Mater. Sci., 1998, vol. 43, pp. 89–170.10.1016/S0079-6425(98)00003-6 ↗
38. C.L. Adam and L.M. Hogan: 1972; C.M. Allen, K.A.Q. O’Reilly, B. Cantor, and P.V. Evans: Progr. Mater. Sci., 1998, vol. 43, pp. 89–170.10.1016/S0079-6425(98)00003-6 ↗
39. C.M. Allen, K.A.Q. O’Reilly, B. Cantor, and P.V. Evans: Mater. Sci. Eng., 1997, vols. A226–A228, pp. 784–88.10.1016/S0921-5093(96)10731-0 ↗
40. G. Sha, K.Q. O’Reilly, B. Cantor, J.M. Titchmarch, and R.G. Hamerton: Acta Mater., 2003, vol. 51, pp. 1883–97.10.1016/S1359-6454(02)00595-5 ↗