journal article·2013-09Open access

The Effects of Low Cu Additions and Predeformation on the Precipitation in a 6060 Al-Mg-Si Alloy

Takeshi Saito, Shinji Muraishi, Calin D. Marioara, Sigmund J. Andersen, Jostein Røyset, Randi Holmestad

Abstract

Effects of low Cu additions (≤0.10 wt pct) and 10 pct predeformation before aging on precipitates’ microstructures and types in a 6060 Al-Mg-Si alloy have been investigated using transmission electron microscopy (TEM). It was found that predeformation enhances precipitation kinetics and leads to formation of heterogeneous precipitate distributions along dislocation lines. These precipitates were often disordered. Cu additions caused finer microstructures, which resulted in the highest hardness of materials, in both the undeformed and the predeformed conditions. The introduced predeformation led to microstructure coarsening. This effect was less pronounced in the presence of Cu. The precipitate structure was studied in detail by high-resolution TEM and high angle annular dark-field scanning TEM (HAADF-STEM). The Cu additions did not alter the respective precipitation sequence in either the undeformed or the predeformed conditions, but caused a large fraction of β″ precipitates to be partially disordered in the undeformed conditions. Cu atomic columns were found in all the investigated precipitates, except for perfect β″. Although no unit cell was observed in the disordered precipitates, the presence of a periodicity having hexagonal symmetry along the precipitate length was inferred from the fast Fourier transforms (FFT) of HRTEM images, and sometimes directly observed in filtered HAADF-STEM images.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. G.A. Edwards, K. Stiller, G.L. Dunlop and M.J. Couper: Acta Mater., 1998, vol. 46, pp. 3893-3904.10.1016/S1359-6454(98)00059-7 ↗
2. S.J. Andersen, H.W. Zandbergen, J. Jansen, C. Træholt, U. Tundal and O. Reiso: Acta Mater., 1998, vol. 46, pp. 3283-98.10.1016/S1359-6454(97)00493-X ↗
3. H.S. Hasting, A.G. Frøseth, S.J. Andersen, R. Vissers, J.C. Walmsley, C.D. Marioara, F. Danoix, W. Lefebvre and R. Holmestad: J. Appl. Phys., 2009, vol. 106, 123527-1-123527-9.10.1063/1.3269714 ↗
4. C.D. Marioara, S.J. Andersen, H.W. Zandbergen and R. Holmestad: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 691-702.
5. C.D. Marioara, H. Nordmark, S.J. Andersen, H.W. Zandbergen and R. Holmestad: J. Mater. Sci., 2006, vol. 41, pp. 471-78.10.1007/s10853-005-2470-1 ↗
6. R. Vissers, M.A. van Huis, J. Jansen, H.W. Zandbergen, C.D. Marioara and S.J. Andersen: Acta Mater., 2007, vol. 55, pp. 3815-23.10.1016/j.actamat.2007.02.032 ↗
7. S.J. Andersen, C.D. Marioara, R. Vissers, A. Frøseth and H.W. Zandbergen, Mater. Sci. Eng. A, 2007, vol. 444, pp. 157-69.10.1016/j.msea.2006.08.084 ↗
8. K. Matsuda, Y. Sakaguchi, Y. Miyata, Y. Uetani, T. Sato, A. Kamio and S. Ikeno, J. Mater. Sci., 2000, vol. 35, pp. 179–89.10.1023/A:1004769305736 ↗
9. C.D. Marioara, S.J. Andersen, T.N. Stene, H. Hasting, J. Walmsley, A.T.J. Van Helvoort and R. Holmestad: Phil. Mag., 2007, vol. 87, pp. 3385-3413.10.1080/14786430701287377 ↗
10. D.J. Chakrabarti and D.E. Laughlin: Prog. Mater. Sci., 2004, vol. 49, pp. 389-410.10.1016/S0079-6425(03)00031-8 ↗
11. C. Cayron, L. Sagalowicz, O. Beffort and P.A. Buffat: Philos. Mag. A, 1999, vol. 79, pp. 2833-51.10.1080/01418619908212027 ↗
12. K. Matsuda, Y. Uetani, T. Sato and S. Ikeno: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1293–99.10.1007/s11661-001-0219-2 ↗
13. L. Arnberg and B. Aurivillius: Acta Chem. Scand. A, 1980, vol. 34, pp. 1-5.10.3891/acta.chem.scand.34a-0001 ↗
14. C.D. Marioara, S.J. Andersen, C.B. Boothroyd, and R. Holmestad: Proceedings of ICAA12, 5–9 September 2010, Yokohama, Japan, ISBN 978-4-905829-11-9, pp. 424–29.
15. H.J. Rack: Mater. Sci. Eng., 1977, vol. 29, pp. 179-88.10.1016/0025-5416(77)90125-2 ↗
16. K. Teichmann, C.D. Marioara, S.J. Andersen and K. Marthinsen: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4006-14.10.1007/s11661-012-1235-0 ↗
17. K. Matsuda, H. Gamada, Y. Uetani, S. Rengakuji, F. Shinagawa and S. Ikeno: J. Jpn. Inst. Light Met., 1998, vol. 48, pp. 471-75.10.2464/jilm.48.471 ↗
18. K. Matsuda, S. Shimizu, H. Gamada, Y. Uetani, F. Shinagawa and S. Ikeno: J. Soc. Mater. Sci. Jpn., 1999, vol. 49, pp. 10-15.10.2472/jsms.48.10 ↗
19. K. Teichmann, C.D. Marioara, S.J. Andersen, K.O. Pedersen, S. Gulbrandsen-Dahl, M. Kolar, R. Holmestad and K. Marthinsen: Philos. Mag., 2011, vol. 91, pp. 3744-54.10.1080/14786435.2011.593577 ↗
20. J.A.S. Green: Aluminum Recycling and Processing for Energy Conservation and Sustainability, ASM International, Materials Park, OH, 2007, pp. 109–134.
21. S.J. Andersen: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1931-38.10.1007/BF02670664 ↗
22. P.D. Nellist and S.J. Pennycook: Ultramicroscopy, 1999, vol. 78, pp. 111-24.10.1016/S0304-3991(99)00017-0 ↗
23. T. Yamazaki, M. Kawasaki, K. Watanabe, I. Hashimoto and M. Shiojiri: Ultramicroscopy, 2002, vol. 92, pp. 181-89.10.1016/S0304-3991(02)00131-6 ↗
24. W.F. Miao and D.E. Laughlin: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 361-71.10.1007/s11661-000-0272-2 ↗
25. R. Vissers, C.D. Marioara, S.J. Andersen, and R. Holmestad: Proceedings of ICAA11, 22–26 September 2008, Aachen, Germany, ISBN 978-3-527-32367-8, vol. 2, pp. 1263–69.
26. M. Torsæter, R. Vissers, C.D. Marioara, S.J. Andersen, and R. Holmestad: Proceedings of ICAA11, 22–26 September 2008, Aachenm, Germany, ISBN 978-3-527-32367-8, vol. 2, pp. 1338–44.
27. M. Torsæter, F.J.H. Ehlers, C.D. Marioara, S.J. Andersen, and R. Holmestad: Philos. Mag., 2012, vol. 92, pp. 3833–56.10.1080/14786435.2012.693214 ↗
28. R. Bjørge, S.J. Andersen, C.D. Marioara, J. Etheridge, and R. Holmestad: Philos. Mag., 2012, vol. 92, pp. 3983–93.10.1080/14786435.2012.700129 ↗