Cold Consolidation of Ball-Milled Titanium Powders Using High-Pressure Torsion
Source abstract
Abstract
Pure Ti (99.5 pct) powders after processing with ball milling (BM) were consolidated to disc-shaped samples with 10-mm diameter and 0.8-mm thickness at room temperature using high-pressure torsion (HPT). A relative density as high as 99.9 pct, high bending and tensile strengths of 2.55 to 3.45 and 1.35 GPa, respectively, and a moderate ductility of 8 pct with an ultrafine grained structure are achieved after cold consolidation with HPT, which exceed those of hot consolidation methods. X-ray diffraction (XRD) analysis showed that a phase transformation occurs from α phase to ω phase during HPT under a pressure of 6 GPa as in bulk pure Ti, whereas no phase transformation is detected after processing with BM alone. It was confirmed that the strength and ductility are improved by a combined application of BM and HPT when compared with other severe plastic deformation methods applied to Ti and Ti-6 pct Al-4 pct V, so that no alloying elements are required for the achievement of a comparable strength and ductility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
2. A.V. Korznikov, I. Safarov, D.V. Laptionok, and R.Z. Valiev: Acta Metall. Mater., 1991, vol. 39, pp. 3193–97.10.1016/0956-7151(91)90054-5 ↗
3. V.A. Zilbershtein, N.P. Chistotina, A.A. Zharov, N.S. Grishina, and E.I. Estrin: Fiz. Metal. Metalloved., 1975, vol. 39, pp. 445–47.
4. P.W. Bridgman: Phys. Rev., 1935, vol. 48, pp. 825–47.10.1103/PhysRev.48.825 ↗
5. H. Shen, B. Guenther, A.V. Koanikov, and R.Z. Valiev: Nanostruct. Mater., 1995, vol. 6, pp. 385–88.10.1016/0965-9773(95)00077-1 ↗
6. R.Z. Valiev, R.S. Mishra, J. Groza, and A.K. Mukherjee: Scripta Mater., 1996, vol. 34, pp. 1443–48.10.1016/1359-6462(95)00676-1 ↗
7. J. Sort, A.P. Zhilyaev, M. Zielinska, J. Nogues, S. Surinach, J. Thibault, and M.D. Baro: Acta Mater., 2003, vol. 51, pp. 6385–93.10.1016/j.actamat.2003.08.006 ↗
8. Z. Lee, F. Zhou, R.Z. Valiev, E.J. Lavernia, and S.R. Nutt: Scripta Mater., 2004, vol. 51, pp. 209–14.10.1016/j.scriptamat.2004.04.016 ↗
9. I.V. Alexandrov, Y.T. Zhu, T.C. Lowe, R.K. Islamgaliev, and R.Z. Valiev: Nanostruct. Mater., 1998, vol. 10, pp. 45–54.10.1016/S0965-9773(98)00026-9 ↗
10. I.V. Alexandrov, Y.T. Zhu, T.C. Lowe, and R.Z. Valiev: Powder Metall., 1998, vol. 41, pp. 11–13.10.1179/pom.1998.41.1.11 ↗
11. I.V. Alexandrov, Y.T. Zhu, T.C. Lowe, R.K. Islamgaliev, and R.Z. Valiev: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2253–60.10.1007/s11661-998-0103-4 ↗
12. V.V. Stolyarov, Y.T. Zhu, T.C. Lowe, R.K. Islamgaliev, and R.Z. Valiev: Mater. Sci. Eng. A, 2000, vol. 282, pp. 78–85.10.1016/S0921-5093(99)00764-9 ↗
13. R. Kuzel, Z. Matej, V. Cherkaska, J. Pesicka, J. Cizek, I. Prochazka, and R.K. Islamgaliev: J. Alloys Compd., 2004, vol. 378, pp. 242–47.10.1016/j.jallcom.2003.12.048 ↗
14. R.K. Islamgaliev, W. Buchgraber, Y.R. Kolobov, N.M. Amirkhanov, A.V. Sergueeva, K.V. Ivanov, and G.P. Grabovetskaya: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 872–76.10.1016/S0921-5093(01)01073-5 ↗
15. T. Tokunaga, K. Kaneko, and Z. Horita: Mater. Sci. Eng. A, 2008, vol. 490, pp. 300–04.10.1016/j.msea.2008.02.022 ↗
16. T. Tokunaga, K. Kaneko, K. Sato, and Z. Horita: Scripta Mater., 2008, vol. 58, pp. 735–38.10.1016/j.scriptamat.2007.12.010 ↗
17. E. Menendez, J. Sort, V. Langlais, A. Zhilyaev, J.S. Munoz, S. Surinach, J. Nogues, and M.D. Baro: J. Alloys Compd., 2007, vols. 434–435, pp. 505–08.10.1016/j.jallcom.2006.08.142 ↗
18. E. Menendez, G. Salazar-Alvarez, A.P. Zhilyaev, S. Surinach, M.D. Baro, J. Nogues, and J. Sort: Adv. Funct. Mater., 2008, vol. 18, pp. 3293–98.10.1002/adfm.200800456 ↗
19. H. Li, A. Misra, Y. Zhu, Z. Horita, C.C. Koch, and T.G. Holesinger: Mater. Sci. Eng. A, 2009, vol. 523, pp. 60–64.10.1016/j.msea.2009.05.031 ↗
20. H. Li, A. Misra, Z. Horita, C.C. Koch, N.A. Mara, P.O. Dickerson, and Y. Zhu: J. Appl. Phys., 2009, vol. 95, p. 071907.
21. A. Bachmaier, A. Hohenwartera, and R. Pippana: Scripta Mater., 2009, vol. 61, pp. 1016–19.10.1016/j.scriptamat.2009.08.016 ↗
22. W.J. Botta Filho, J.B. Fogagnolo, C.A.D. Rodrigues, C.S. Kiminami, C. Bolfarini, and A.R. Yavari: Mater. Sci. Eng. A, 2004, vols. 375–377, pp. 936–941.10.1016/j.msea.2003.10.072 ↗
23. J. Sort, D.C. Ile, A.P. Zhilyaev, A. Concustell, T. Czeppe, M. Stoica, S. Surinach, J. Eckert, and M.D. Baro: Scripta Mater., 2004, vol. 50, pp. 1221–25.10.1016/j.scriptamat.2004.02.004 ↗
24. A.R. Yavari, W.J. Botta Filho, C.A.D. Rodrigues, C. Cardoso, and R.Z. Valiev: Scripta Mater., 2002, vol. 46, pp. 711–16.10.1016/S1359-6462(02)00057-X ↗
25. Z. Kovacs, P. Henits, A.P. Zhilyaev, and A. Revesz: Scripta Mater., 2006, vol. 54, pp. 1733–37.10.1016/j.scriptamat.2006.02.004 ↗
26. N. Boucharat, R. Hebert, H. Rosner, R.Z. Valiev, and G. Wilde: J. Alloys Compd., 2007, vols. 434–435, pp. 252–54.10.1016/j.jallcom.2006.08.128 ↗
27. T. Czeppe, G. Korznikova, J. Morgiel, A. Korznikov, N.Q. Chinh, P. Ochin, and A. Sypien: J. Alloys Compd., 2009, vol. 483, pp. 74–77.10.1016/j.jallcom.2008.07.165 ↗
28. K. Edalati, Y. Yokoyama, and Z. Horita: Mater. Trans., 2010, vol. 51, pp. 23–26.10.2320/matertrans.MB200914 ↗
29. A.P. Zhilyaev, A.A. Gimazov, G.I. Raab, and T.G. Langdon: Mater. Sci. Eng. A, 2008, vol. 486, pp. 123–28.10.1016/j.msea.2007.08.070 ↗
30. A.P. Zhilyaev, S. Swaminathan, A.A. Gimazov, T.R. McNelley, and T.G. Langdon: J. Mater. Sci., 2008, vol. 43, pp. 7451–56.10.1007/s10853-008-2714-y ↗
31. K. Edalati and Z. Horita: Scripta Mater., 2010, vol. 63, pp. 174–77.10.1016/j.scriptamat.2010.03.048 ↗
32. J.S. Benjamin: Sci. Am., 1976, vol. 234, pp. 40–48.10.1038/scientificamerican0576-40 ↗
33. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
34. ASM Handbook, vol. 7, Powder Metal Technologies and Applications, 10th ed., ASM INTERNATIONAL, Metals Park, OH, 1998.
35. C.J. Lu, J. Zhang, and Z.Q. Li: J. Alloys Compd., 2004, vol. 381, pp. 278–83.10.1016/j.jallcom.2004.03.130 ↗
36. Y.Y. Li, C. Yang, W.P. Chen, X.Q. Li, and M. Zhu: J. Mater. Res., 2007, vol. 22, pp. 1927–32.10.1557/jmr.2007.0243 ↗
37. P. Chatterjee and S.P. Sen Gupta: Philos. Mag. A, 2001, vol. 81, pp. 49–60.10.1080/01418610108216617 ↗
38. I. Manna, P.P. Chattopadhyay, P. Nandi, F. Banhart, and H.J. Fecht: J. Appl. Phys., 2003, vol. 93, pp. 1520–2410.1063/1.1530718 ↗
39. J. Dutkiewicz, J. Kusnierz, M. Maziarz, M. Lejkowska, H. Garbacz, M. Lewandowska, A. Dobromyslov, and K.J. Kurzydlowski: Phys. Status Solidi A, 2005, vol. 202, pp. 2309–20.10.1002/pssa.200521235 ↗
40. F. Sun, A. Zuniga, P. Rojas, and E.J. Lavernia: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2069–78.10.1007/BF02586127 ↗
41. H. Fujiwara, T. Sekiguchi, and K. Ameyama: Int. J. Mater. Res., 2009, vol. 100, pp. 796–99.10.3139/146.110116 ↗
42. Y.K. Vohra, S.K. Sikka, S.N. Vaidya, and R. Chidamberan: J. Phys. Chem. Solids, 1977, vol. 38 (11), pp. 1293–96.10.1016/0022-3697(77)90031-2 ↗
43. A.R. Kilmametov, A.V. Khristoforova, G. Wilde, and R.Z. Valiev: Z. Kristallogr. Suppl., 2007, vol. 26, pp. 339–44.10.1524/zksu.2007.2007.suppl_26.339 ↗
44. Y. Ivanisenko, A. Kilmametov, H. Rosner, and R.Z. Valiev: Int. J. Mater. Res., 2008, vol. 99, pp. 36–41.10.3139/146.101606 ↗
45. Y. Todaka, J. Sasaki, T. Moto, and M. Umemoto: Scripta Mater., 2008, vol. 59, pp. 615–18.10.1016/j.scriptamat.2008.05.015 ↗
46. K. Edalati, E. Matsubara, and Z. Horita: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2079–86.10.1007/s11661-009-9890-5 ↗
47. K. Edalati, Z. Horita, S. Yagi, and E. Matsubara: Mater. Sci. Eng. A, 2009, vol. 523, pp. 277–81.10.1016/j.msea.2009.07.029 ↗
48. ASTM E290, Standard Test Methods for Bend Testing of Material for Ductility, ASTM International, West Conshohocken, PA, 2009.
49. K. Edalati, Z. Horita, and T.G. Langdon: Scripta Mater., 2009, vol. 60, pp. 9–12.10.1016/j.scriptamat.2008.08.042 ↗
50. K. Edalati, T. Fujioka, and Z. Horita: Mater. Trans., 2009, vol. 50, pp. 44–50.10.2320/matertrans.MD200812 ↗
51. K. Edalati, Z. Horita, M. Tanaka, and K. Higashida: Adv. Mater. Res., 2010, vol. 89–91, pp. 171–76.10.4028/www.scientific.net/AMR.89-91.171 ↗
52. A. Vorhauer and R. Pippan: Scripta Mater., 2004, vol. 51, pp. 921–25.10.1016/j.scriptamat.2004.04.025 ↗
53. K. Edalati, T. Fujioka, and Z. Horita: Mater. Sci. Eng. A, 2008, vol. 497, pp. 168–73.10.1016/j.msea.2008.06.039 ↗
54. K. Edalati, Z. Horita, and Y. Mine: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2136–41.10.1016/j.msea.2009.11.060 ↗
55. M. Kai, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2008, vol. 488, pp. 117–24.10.1016/j.msea.2007.12.046 ↗
56. V.V. Stolyarov, Y.T. Zhu, T.C. Lowe, and R.Z. Valiev: Mater. Sci. Eng. A, 2001, vol. 303 pp. 82–89.10.1016/S0921-5093(00)01884-0 ↗
57. V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C. Lowe, and R.Z. Valiev: Mater. Sci. Eng. A, 2003, vol. 343, pp. 43–50.10.1016/S0921-5093(02)00366-0 ↗
58. D. Terada, S. Inoue, and N. Tsuji: J. Mater. Sci., 2007, vol. 42, pp. 1673–81.10.1007/s10853-006-0909-7 ↗
59. Y.H. Zhao, Y.Z. Guo, Q. Wei, A.M. Dangelewicz, C. Xu, Y.T. Zhu, T.G. Langdon, Y.Z. Zhou, and E.J. Lavernia: Scripta Mater., 2008, vol. 59, pp. 627–30.10.1016/j.scriptamat.2008.05.031 ↗