journal article·2010-08

Effect of Ca and Rare Earth Elements on Impression Creep Properties of AZ91 Magnesium Alloy

B. Nami, H. Razavi, S. Mirdamadi, S.G. Shabestari, S.M. Miresmaeili

Publisher page

Abstract

Creep properties of AZ91 magnesium alloy and AZRC91 (AZ91 + 1 wt pct RE + 1.2 wt pct Ca) alloy were investigated using the impression creep method. It was shown that the creep properties of AZ91 alloy are significantly improved by adding Ca and rare earth (RE) elements. The improvement in creep resistance is mainly attributed to the reduction in the amount and continuity of eutectic β(Mg17Al12) phase as well as the formation of new Al11RE3 and Al2Ca intermetallic compounds at interdendritic regions. It was found that the stress exponent of minimum creep rate, n, varies between 5.69 and 6 for AZ91 alloy and varies between 5.81 and 6.46 for AZRC91 alloy. Activation energies of 120.9 ± 8.9 kJ/mol and 100.6 ± 7.1 kJ/mol were obtained for AZ91 and AZRC91 alloys, respectively. It was shown that the lattice and pipe-diffusion-controlled dislocation climb are the dominant creep mechanisms for AZ91 and AZRC91 alloys, respectively. The constitutive equations, correlating the minimum creep rate with temperature and stress, were also developed for both alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. P. Zhang: Scripta Mater., 2005, vol. 52, pp. 277–82.10.1016/j.scriptamat.2004.10.017 ↗
2. N. Balasubramani, A. Srinivasan, U.T.S. Pillai, and B.C. Pai: Mater. Sci. Eng. A, 2007, vol. 457, pp. 275–81.10.1016/j.msea.2006.12.132 ↗
3. K.U. Kainer and F. von Buch: Magnesium—Alloys and Technology, Wiley-VCH, New York, NY, 2003, pp. 1–22.10.1002/3527602046 ↗
4. A. Luo and M. Pekguleryuz: J. Mater. Sci., 1994, vol. 29 (20), pp. 5259–71.10.1007/BF01171534 ↗
5. F.H. Froes, D. Eliezer, and E. Aghion: JOM, 1998, vol. 50 (9), pp. 30–34.10.1007/s11837-998-0411-6 ↗
6. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2001, vol. 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
7. D. Amberger, P. Eisenlohr, and M. Goken: Mater. Sci. Eng. A, 2009, vols. 510–511, pp. 398–402.10.1016/j.msea.2008.04.115 ↗
8. K. Hirai, H. Somekawa, Y. Takigawa, and K. Higashi: Mater. Sci. Eng. A, 2005, vol. 403, pp. 276–80.10.1016/j.msea.2005.05.028 ↗
9. F. Kabirian and R. Mahmudi: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2190–201.10.1007/s11661-009-9905-2 ↗
10. F. Khomamizadeh, B. Nami, and S. Khoshkhooei: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3489–94.10.1007/s11661-005-0022-6 ↗
11. Y. Lu, Q. Wang, X. Zeng, W. Ding, C. Zhai, and Y. Zhu: Mater. Sci. Eng. A, 2000, vol. 278, pp. 66–76.10.1016/S0921-5093(99)00604-8 ↗
12. J. Wang, L. Wang, J. An, and Y. Liu: J. Mater. Eng. Perform., 2008, vol. 17, pp. 725–29.10.1007/s11665-007-9168-2 ↗
13. G. Wu, Y. Fan, H. Gao, C. Zhai, and Y.P. Zhu: Mater. Sci. Eng. A, 2005, vol. 408, pp. 255–63.10.1016/j.msea.2005.08.011 ↗
14. D. Wenwen, S. Yangshan, M. Xuegang, X. Feng, Z. Min, and W. Dengyun: Mater. Sci. Eng. A, 2003, vol. 356, pp. 1–7.10.1016/S0921-5093(02)00551-8 ↗
15. Y. Guangyin, W. Qudong, and D. Wenjiang: J. Mater. Sci., 2002, vol. 37, pp. 127–32.10.1023/A:1013114412378 ↗
16. A Srinivasan, U.T.S. Pillai, and B.C. Pai: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2235–43.10.1007/s11661-005-0342-6 ↗
17. R. Ninomiya, T. Ojiro, and K. Kubota: Acta Metall. Mater., 1995, vol. 43, pp. 669–74.10.1016/0956-7151(94)00269-N ↗
18. E. Aghion, B. Bronfin, F.V. Buch, S. Schumann, and H. Friedrich: JOM, 2003, vol. 55 (11), pp. 30–33.10.1007/s11837-003-0206-8 ↗
19. W. Qudong, C. Wenzhou, Z. Xiaoqin, L. Yizhen, D Wenjiang, Z. Yanping, X. Xiaoping: J. Mater. Sci., 2001, vol. 36, pp. 3035–40.10.1023/A:1017927109291 ↗
20. Y. Wang, Q. Wang, C. Ma, W. Ding, and Y. Zhu: Mater. Sci. Eng. A, 2003, vol. 342, pp. 178–82.10.1016/S0921-5093(02)00315-5 ↗
21. W. Qudong, L. Yizhen, Z. Xiaoqin, D. Wenjiang, Z. Yanping, L. Qinghua, and L. Jie: Mater. Sci. Eng. A, 1999, vol. 271, pp. 109–15.10.1016/S0921-5093(99)00185-9 ↗
22. P. Li, B. Tang, and E.G. Kandalova: Mater. Lett., 2005, vol. 59, pp. 971–7510.1016/j.matlet.2004.10.079 ↗
23. D.R. Askeland: The Science and Engineering of Materials, Chapman and Hall, New York, NY, 1990.
24. B. Nami, S.G. Shabestari, S.M. Miresmaeili, H. Razavi, and S. Mirdamadi: J. Alloys Compd., 2010, vol. 489, pp. 570–75.10.1016/j.jallcom.2009.09.112 ↗
25. B. Nami: Ph.D. Thesis, Iran University of Science and Technology, Tehran, Iran, 2010.
26. C. Park, X. Long, S. Haberman, S. Ma, I. Dutta, R. Mahajan, and S.G. Jadhav: J. Mater. Sci., 2007, vol. 42, pp. 5182–87.10.1007/s10853-006-0542-5 ↗
27. L. Peng, F. Yang, J.F. Nie, and J.C.M. Li: Mater. Sci. Eng. A, 2005, vols. 410–411, pp. 42–47.10.1016/j.msea.2005.08.031 ↗
28. K. Ishikawa, H. Watanabe, and T. Mukai: Mater. Lett., 2005, vol. 59, pp. 1511–15.10.1016/j.matlet.2005.01.012 ↗
29. S.M. Zhu, B.L. Mordike, and J.F. Nie: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1221–29.10.1007/s11661-006-1073-z ↗
30. M.E. Kassner and M.T.P. Prado: Fundamentals of Creep in Metals and Alloys, 1st ed., Elsevier, New York, NY, 2004.
31. B. Kondori and R. Mahmudi: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2007–15.10.1007/s11661-009-9867-4 ↗
32. S. Ji, M. Qian, and Z. Fan: Mater. Sci. Eng. A, 2006, vol. 434, pp. 7–12.10.1016/j.msea.2006.07.045 ↗
33. H. Somekawa, K. Hirai, H. Watanabe, Y. Takigawa, and K. Higashi: Mater. Sci. Eng. A, 2005, vol. 407, pp. 53–61.10.1016/j.msea.2005.06.059 ↗
34. B. Jing, S. Yangshan, X. Feng, X. Shan, Q. Jing, and T. Weijian: Scripta Mater., 2006, vol. 55, pp. 1163–66.10.1016/j.scriptamat.2006.08.020 ↗
35. M.D. Mathew, H. Yang, S. Movva, and K.L. Murty: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 99–105.10.1007/s11661-005-0142-z ↗
36. S. Spigarelli, M. Cabibbo, E. Evangelista, M. Talianker, and V. Ezersky: Mater. Sci. Eng. A, 2000, vol. 289, pp. 172–81.10.1016/S0921-5093(00)00911-4 ↗
37. T.G. Langdon: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 249–59.10.1007/s11661-002-0087-4 ↗
38. K. Milicka, J. Cadek, and P. Rys: Acta Metall., 1970, vol. 18, pp. 1071–82.10.1016/0001-6160(70)90005-2 ↗
39. L. Shi and D.O. Northwood: Acta Metall. Mater., 1994, vol. 42 (3), pp. 871–77.10.1016/0956-7151(94)90282-8 ↗
40. M. Regev, E. Aghion, A. Rosen, and M. Bamberger: Mater. Sci. Eng. A, 1998, vol. 52, pp. 6–16.10.1016/S0921-5093(98)00668-6 ↗
41. S. Spigarelli, M. Regev, E. Evangelista, and A. Rosen: Mater. Sci. Technol., 2001, vol. 17, pp. 627–38.10.1179/026708301101510483 ↗
42. F. Kabirian and R. Mahmudi: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 116–27.10.1007/s11661-008-9699-7 ↗
43. M. Kunst, A.F. Bunk, G. Lesperance, P. Plamondon, and U. Glatzel: Mater. Sci. Eng. A, 2009, vols. 510–511, pp. 109–25.
44. L. Robinson and O.D. Sherby: Acta Metall., 1969, vol. 17, pp. 109–25.10.1016/0001-6160(69)90132-1 ↗
45. H. Baker: Alloys Phase Diagram, ASM INTERNATIONAL, Metals Park, OH, 1992.
46. K. Ozturk, Y. Zhong, A.A. Luo, and Z.K. Liu: JOM, 2003, vol. 55, pp. 40–44.10.1007/s11837-003-0208-6 ↗
47. S.M. Zhu, M.A. Gibson, J.F. Nie, M.A. Easton, and T.B. Abbott: Scripta Mater., 2008, vol. 58 (6), pp. 477–80.10.1016/j.scriptamat.2007.10.041 ↗
48. A.A. Luo, M.P. Balogh, and B.R. Powell: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 567–74.10.1007/s11661-002-0118-1 ↗
49. Y. Terada, R. Sota, N. Ishimatsu, T. Sato, and K. Ohori: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3029–32.10.1007/s11661-004-0046-3 ↗
50. W. Blum, P. Zhang, B. Watzinger, B.V. Grossmann, and H.G. Haldenwanger: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 735–40.10.1016/S0921-5093(00)02016-5 ↗
51. S. Celotto and T.J. Bastow: Acta Mater., 2001, vol. 49, pp. 41–51.10.1016/S1359-6454(00)00305-0 ↗
52. C.J. Bettles: Mater. Sci. Eng. A, 2003, vol. 348, pp. 280–88.10.1016/S0921-5093(02)00731-1 ↗
53. X. Min, Y. Sun, F. Xue, W. Du, and D. Wu: Mater. Chem. Phys., 2002, vol. 78, pp. 88–93.10.1016/S0254-0584(02)00312-7 ↗
54. B. Kondori and R. Mahmudi: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2014–21.10.1016/j.msea.2009.11.043 ↗
55. M.S. Dargusch, S.M. Zhu, J.F. Nie, and G.L. Dunlop: Scripta Mater., 2009, vol. 60, pp. 116–19.10.1016/j.scriptamat.2008.09.013 ↗